This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
[Bug 1001219] New: Ethernet driver for STM32 connectivity line with port on MMstm32f107 board.
- From: bugzilla-daemon at bugs dot ecos dot sourceware dot org
- To: ecos-patches at ecos dot sourceware dot org
- Date: Tue, 3 May 2011 23:11:20 +0100
- Subject: [Bug 1001219] New: Ethernet driver for STM32 connectivity line with port on MMstm32f107 board.
- Auto-submitted: auto-generated
Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001219
Summary: Ethernet driver for STM32 connectivity line with port
on MMstm32f107 board.
Product: eCos
Version: CVS
Platform: Other (please specify)
OS/Version: ARM
Status: UNCONFIRMED
Severity: enhancement
Priority: low
Component: Patches and contributions
AssignedTo: unassigned@bugs.ecos.sourceware.org
ReportedBy: jerzdy@gmail.com
CC: ecos-patches@ecos.sourceware.org
Class: Advice Request
Created an attachment (id=1218)
--> (http://bugs.ecos.sourceware.org/attachment.cgi?id=1218)
Ethernet driver for STM32 connectivity line with port on MMstm32f107 board
Hello all,
I would like to contribute Ethernet driver for STM32 connectivity line but due
to fact that the some support from HAL package is also required. I provide port
on MMstm32f107 board.
Beside of extending stm32/var include files to provide description of Ethernet
module and adding support of new model of clock distribution in STM32
connectivity line I would like to point functionality which cause me a lot of
problem to start Ethernet driver i.e.
stm32_misc.c in function hal_variant_init() is enabled clocks for all APB
peripherals. In case of Ethernet driver it should be done :
1) after PLL configuration (switching it on this stage cause hang up of MDIO
bus)
2) only used peripherals ( switching on all APB module cause hang up of RMII
bus)
My suggestion is to move it to board dependent area i.e. hal_platform_init()
and switch only those modules which are really added to eCos image.
Best regards,
jerzy
--
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.