This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[Bug 1001219] Ethernet driver for STM32 connectivity line with port on MMstm32f107 board.


Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001219

Jerzy Dyrda <jerzdy@gmail.com> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
   Attachment #1450|0                           |1
        is obsolete|                            |
   Attachment #1488|0                           |1
        is obsolete|                            |
   Attachment #1489|0                           |1
        is obsolete|                            |
   Attachment #1491|0                           |1
        is obsolete|                            |
   Attachment #1548|0                           |1
        is obsolete|                            |

--- Comment #39 from Jerzy Dyrda <jerzdy@gmail.com> 2012-12-10 22:33:15 GMT ---
Created an attachment (id=1997)
 --> (http://bugs.ecos.sourceware.org/attachment.cgi?id=1997)
Eth driver for STM32 family. 

Hello all,

After long time I've gone back to eth driver and now it's works as well on
STM32F4 controller. 
Patch consists only from driver, few extra definitions in 
packages/hal/cortexm/stm32/var/current/include/var_io_eth and entry in ecos.db
Disclaimer:
Driver was tested only on Olimex board STM32-E407 what means different
connections
between PHY and MAC (RMII mode and clock 50 MHz from external generator) than
on STM3240G-EVAL.

Best regards,
jerzy

-- 
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]