Re: [rfa/tui] Convert TUI to MI Makefile configury

[Andrew Cagney <ac131313 at cygnus dot com>]

Jimmy Guo wrote:
> 
> Andrew,
> 
> You didn't include the configure.in part of the changes ... I will look
> at it again when you have the complete diff.

Oops.  Try the attached.  The configury is fairly under exciting :-)

	Andrew
Index: ChangeLog
Mon May 15 16:55:22 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* configure.in (AC_OUTPUT): Do not generate tui/Makefile.
	(enable-tui): Convert Makefile configury to use the same mechanism
 	as MI.

	* Makefile.in (BUILD_TUI, TUI_LIBRARY, TUI_DIR, TUI_SRC,
 	TUI_CFLAGS): Delete
	(all-tui): Delete target.
	(tuiWin.o, tuiStack.o, tuiSourceWin.o, tuiSource.o, tuiRegs.o,
 	tuiLayout.o, tuiIO.o, tuiGeneralWin.o, tuiDisassem.o,
 	tuiDataWin.o, tuiData.o, tuiCommand.o, tui.o): New targets.
	(SUBDIR_TUI_OBS, SUBDIR_TUI_SRCS, SUBDIR_TUI_DEPS,
 	SUBDIR_TUI_INITS, SUBDIR_TUI_LDFLAGS, SUBDIR_TUI_CFLAGS,
 	SUBDIR_TUI_ALL, SUBDIR_TUI_CLEAN, SUBDIR_TUI_INSTALL,
 	SUBDIR_TUI_UNINSTALL): Define.

Index: tui/ChangeLog
Mon May 15 17:16:10 2000  Andrew Cagney  <cagney@b1.cygnus.com>

	* Makefile.in: Delete.

Index: Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/Makefile.in,v
retrieving revision 1.30
diff -p -r1.30 Makefile.in
*** Makefile.in	2000/05/10 20:07:24	1.30
--- Makefile.in	2000/05/15 10:50:54
*************** DLLTOOL = @DLLTOOL@
*** 62,75 ****
  WINDRES = @WINDRES@
  MIG = @MIG@
  
- # If the user configured GDB to include the TUI, the name of the tui
- # library goes here.
- TUI_LIBRARY = @TUI_LIBRARY@
- 
- # If the user configured GDB to include the TUI, the all-tui 
- # target goes here.
- BUILD_TUI = @BUILD_TUI@
- 
  # Flags that describe where you can find the termcap library.
  # This can be overridden in the host Makefile fragment file.
  TERMCAP = @TERM_LIB@
--- 62,67 ----
*************** INTL_DEPS = @INTLDEPS@
*** 142,152 ****
  INTL_SRC = $(srcdir)/$(INTL_DIR)
  INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
  
- # Where is the TUI library?  Typically in tui/.
- TUI_DIR=tui
- TUI_SRC = $(srcdir)/$(TUI_DIR)
- TUI_CFLAGS= -I$(TUI_SRC)
- 
  #
  # MI sub directory definitons
  #
--- 134,139 ----
*************** SUBDIR_MI_CLEAN=
*** 172,177 ****
--- 159,191 ----
  SUBDIR_MI_INSTALL=
  SUBDIR_MI_UNINSTALL=
  
+ #
+ # TUI sub directory definitions
+ #
+ SUBDIR_TUI_OBS = \
+ 	tui.o tuiData.o tuiSource.o tuiStack.o tuiIO.o \
+ 	tuiGeneralWin.o tuiLayout.o tuiWin.o tuiCommand.o \
+ 	tuiDisassem.o tuiSourceWin.o tuiRegs.o tuiDataWin.o
+ SUBDIR_TUI_SRCS = \
+ 	tui/tui.c tui/tuiData.c tui/tuiSource.c \
+ 	tui/tuiStack.c tui/tuiIO.c \
+ 	tui/tuiGeneralWin.c tui/tuiLayout.c \
+ 	tui/tuiWin.c tui/tuiCommand.c \
+ 	tui/tuiDisassem.c tui/tuiSourceWin.c \
+ 	tui/tuiRegs.c tui/tuiDataWin.c
+ SUBDIR_TUI_DEPS =
+ SUBDIR_TUI_INITS = \
+ 	$(SUBDIR_TUI_SRCS)
+ SUBDIR_TUI_LDFLAGS=
+ SUBDIR_TUI_CFLAGS= \
+ 	-DTUI=1 -I${srcdir}/tui
+ SUBDIR_TUI_ALL=
+ SUBDIR_TUI_CLEAN=
+ SUBDIR_TUI_INSTALL=
+ SUBDIR_TUI_UNINSTALL=
+ 
+ 
+ 
  # Opcodes currently live in one of two places.  Either they are in the
  # opcode library, typically ../opcodes, or they are in a header file
  # in INCLUDE_DIR.
*************** INTERNAL_WARN_CFLAGS = \
*** 275,281 ****
  	$(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
  	$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
  	$(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
! 	$(INTL_CFLAGS) $(TUI_CFLAGS) $(ENABLE_CFLAGS) \
  	$(GDB_WARN_CFLAGS)
  INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
  
--- 289,295 ----
  	$(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
  	$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
  	$(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
! 	$(INTL_CFLAGS) $(ENABLE_CFLAGS) \
  	$(GDB_WARN_CFLAGS)
  INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
  
*************** kdb:	$(NTSSTART) $(OBS) $(NTSOBS) $(ADD_
*** 837,849 ****
  	ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
  	  -lc $(CLIBS)
  
- # Have the TUI library depend on a phony target, so we'll always
- # recurse and make sure it's up to date.  If it is, then the file will
- # be unchanged, and we won't rebuild it.
- # .PHONY: check-tui
- all-tui: 
- 	@(cd tui; ${MAKE} ${FLAGS_TO_PASS} all)
- 
  # Put the proper machine-specific files first, so M-. on a machine
  # specific routine gets the one for the correct machine.  (FIXME: those
  # files go in twice; we should be removing them from the main list).
--- 851,856 ----
*************** mi-parse.o: $(srcdir)/mi/mi-parse.c $(de
*** 1986,1990 ****
--- 1993,2062 ----
  	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/mi/mi-parse.c
  mi-getopt.o: $(srcdir)/mi/mi-getopt.c $(mi_getopt_h) $(defs_h)
  	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/mi/mi-getopt.c
+ 
+ #
+ # TUI dependencies
+ #
+ # Need to explicitly specify the compile rule as make will do nothing
+ # or try to compile the object file into the mi directory.
+ 
+ tui.o: $(srcdir)/tui/tui.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiLayout.h $(srcdir)/tui/tuiIO.h \
+ 		$(srcdir)/tui/tuiRegs.h $(srcdir)/tui/tuiWin.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tui.c
+ tuiCommand.o: $(srcdir)/tui/tuiCommand.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiWin.h $(srcdir)/tui/tuiIO.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiCommand.c
+ tuiData.o: $(srcdir)/tui/tuiData.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiData.c
+ tuiDataWin.o: $(srcdir)/tui/tuiDataWin.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiRegs.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiDataWin.c
+ tuiDisassem.o: $(srcdir)/tui/tuiDisassem.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiLayout.h $(srcdir)/tui/tuiSourceWin.h \
+ 		$(srcdir)/tui/tuiStack.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiDisassem.c
+ tuiGeneralWin.o: $(srcdir)/tui/tuiGeneralWin.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiGeneralWin.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiGeneralWin.c
+ tuiIO.o: $(srcdir)/tui/tuiIO.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiIO.h $(srcdir)/tui/tuiCommand.h \
+ 		$(srcdir)/tui/tuiWin.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiIO.c
+ tuiLayout.o: $(srcdir)/tui/tuiLayout.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiGeneralWin.h $(srcdir)/tui/tuiStack.h \
+ 		$(srcdir)/tui/tuiRegs.h $(srcdir)/tui/tuiDisassem.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiLayout.c
+ tuiRegs.o: $(srcdir)/tui/tuiRegs.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiLayout.h $(srcdir)/tui/tuiWin.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiRegs.c
+ tuiSource.o: $(srcdir)/tui/tuiSource.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiStack.h $(srcdir)/tui/tuiSourceWin.h \
+ 		$(srcdir)/tui/tuiSource.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiSource.c
+ tuiSourceWin.o: $(srcdir)/tui/tuiSourceWin.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiStack.h $(srcdir)/tui/tuiSourceWin.h \
+ 		$(srcdir)/tui/tuiSource.h $(srcdir)/tui/tuiDisassem.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiSourceWin.c
+ tuiStack.o: $(srcdir)/tui/tuiStack.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiStack.h $(srcdir)/tui/tuiSourceWin.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiStack.c
+ tuiWin.o: $(srcdir)/tui/tuiWin.c \
+ 		$(srcdir)/tui/tui.h $(srcdir)/tui/tuiData.h \
+ 		$(srcdir)/tui/tuiGeneralWin.h $(srcdir)/tui/tuiStack.h \
+ 		$(srcdir)/tui/tuiSourceWin.h $(srcdir)/tui/tuiDataWin.h
+ 	$(CC) -c $(INTERNAL_WARN_CFLAGS) $(srcdir)/tui/tuiWin.c
  
  ### end of the gdb Makefile.in.
Index: configure.in
===================================================================
RCS file: /cvs/src/src/gdb/configure.in,v
retrieving revision 1.22
diff -p -r1.22 configure.in
*** configure.in	2000/05/12 04:37:00	1.22
--- configure.in	2000/05/24 03:15:07
*************** AC_ARG_ENABLE(tui,
*** 456,472 ****
  ])
  case ${enable_tui} in
    "yes" )
!     AC_DEFINE(TUI)
!     BUILD_TUI=all-tui
!     TUI_LIBRARY=tui/libtui.a
!   ;;
!   * )
!     BUILD_TUI=
!     TUI_LIBRARY=
!   ;;
  esac
- AC_SUBST(BUILD_TUI)
- AC_SUBST(TUI_LIBRARY)
  
  AC_ARG_ENABLE(netrom,
  [  --enable-netrom         Enable NetROM support],
--- 456,474 ----
  ])
  case ${enable_tui} in
    "yes" )
!     if test -d "${srcdir}/tui" ; then
!       CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_TUI_OBS)"
!       CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_TUI_DEPS)"
!       CONFIG_SRCS="${CONFIG_SRS} \$(SUBDIR_TUI_SRCS)"
!       CONFIG_INITS="${CONFIG_INITS} \$(SUBDIR_TUI_INITS)"
!       ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_TUI_CFLAGS)"
!       CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_TUI_ALL)"
!       CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_TUI_CLEAN)"
!       CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_TUI_INSTALL)"
!       CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_TUI_UNINSTALL)"
!     fi
!     ;;
  esac
  
  AC_ARG_ENABLE(netrom,
  [  --enable-netrom         Enable NetROM support],
*************** dnl Check for exe extension set on certa
*** 1008,1014 ****
  AC_EXEEXT
  
  AC_CONFIG_SUBDIRS($configdirs)
! AC_OUTPUT(Makefile tui/Makefile .gdbinit:gdbinit.in,
  [
  dnl Autoconf doesn't provide a mechanism for modifying definitions 
  dnl provided by makefile fragments.
--- 1010,1016 ----
  AC_EXEEXT
  
  AC_CONFIG_SUBDIRS($configdirs)
! AC_OUTPUT(Makefile .gdbinit:gdbinit.in,
  [
  dnl Autoconf doesn't provide a mechanism for modifying definitions 
  dnl provided by makefile fragments.
Index: tui/Makefile.in
===================================================================
RCS file: Makefile.in
diff -N Makefile.in
*** /sourceware/cvs-tmp/cvsJHuOny	Mon May 15 03:50:55 2000
--- /dev/null	Tue May  5 13:32:27 1998
***************
*** 1,171 ****
- # Copyright 1998 Free Software Foundation, Inc.
- 
- # This file is part of GDB.
- 
- # This program is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2 of the License, or
- # (at your option) any later version.
- # 
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY; without even the implied warranty of
- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- # GNU General Public License for more details.
- # 
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- 
- all: libtui.a
- 
- srcdir=@srcdir@
- VPATH = @srcdir@
- 
- SHELL = @SHELL@
- 
- CC=@CC@
- CFLAGS=@CFLAGS@
- AR=@AR@
- RANLIB=@RANLIB@
- 
- # Host and target-dependent makefile fragments come in here.
- @host_makefile_frag@
- @target_makefile_frag@
- # End of host and target-dependent makefile fragments
- 
- # Where is our "include" directory?  Typically $(srcdir)/../include.
- # This is essentially the header file directory for the library
- # routines in libiberty.
- INCLUDE_DIR =  $(srcdir)/../../include
- INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
- 
- # Configured by the --with-mmalloc option to configure.
- MMALLOC = @MMALLOC@
- MMALLOC_CFLAGS = @MMALLOC_CFLAGS@
- 
- # Where is the BFD library?  Typically in ../bfd.
- BFD_DIR = ../../bfd
- BFD_SRC = $(srcdir)/$(BFD_DIR)
- BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
- 
- # Where is the READLINE library?  Typically in ../readline.
- READLINE_DIR = ../../readline
- READLINE_SRC = $(srcdir)/$(READLINE_DIR)
- READLINE_CFLAGS = -I$(READLINE_SRC)
- 
- # Where is the INTL library?  Typically in ../intl.
- INTL_DIR = ../../intl
- INTL_SRC = $(srcdir)/$(INTL_DIR)
- INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
- 
- # Where is the TCL library?  Typically in ../tcl.
- TCL_CFLAGS = @TCLHDIR@
- 
- # Where is the TK library?  Typically in ../tk.
- TK_CFLAGS = @TKHDIR@ @TK_BUILD_INCLUDES@
- 
- # Where is Itcl?  Typically in ../itcl.
- ITCL_CFLAGS = @ITCLHDIR@
- 
- # Where is Tix?  Typically in ../tix.
- TIX_CFLAGS = @TIXHDIR@
- 
- X11_CFLAGS = @TK_XINCLUDES@
- 
- ENABLE_IDE= @ENABLE_IDE@
- 
- GUI_CFLAGS_X = -I$(srcdir)/../../libgui/src
- 
- IDE_CFLAGS_X = -I$(srcdir)/../../libidetcl/src -I$(srcdir)/../../libide/src \
-   `if [ x"$(ENABLE_IDE)" != x ] ; then \
-     echo -DIDE -I$(srcdir)/../../ilu/runtime/mainloop;\
-   fi`
- 
- IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
- 
- ENABLE_CFLAGS= @ENABLE_CFLAGS@
- 
- # -I. for config files.
- # -I$(srcdir) for gdb internal headers and possibly for gnu-regex.h also.
- # -I$(srcdir)/config for more generic config files.
- 
- # It is also possible that you will need to add -I/usr/include/sys if
- # your system doesn't have fcntl.h in /usr/include (which is where it
- # should be according to Posix).
- DEFS = @DEFS@
- GDB_CFLAGS = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config $(DEFS)
- 
- # M{H,T}_CFLAGS, if defined, have host- and target-dependent CFLAGS
- # from the config directory.
- GLOBAL_CFLAGS = $(MT_CFLAGS) $(MH_CFLAGS)
- #PROFILE_CFLAGS = -pg
- 
- # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
- INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
- 	$(GDB_CFLAGS) $(READLINE_CFLAGS) $(BFD_CFLAGS) \
- 	$(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(INTL_CFLAGS) \
- 	$(ENABLE_CFLAGS)
- 
- HEADERS = tuiIO.h tuiData.h tuiGeneralWin.h tuiLayout.h tuiStack.h \
- 	  tuiSource.h tuiCommand.h tuiWin.h tuiDisassem.h \
- 	  tuiSourceWin.h tuiRegs.h tuiDataWin.h
- 
- SOURCES = tui.c tuiData.c tuiSource.c tuiStack.c tuiIO.c \
- 	  tuiGeneralWin.c tuiLayout.c tuiWin.c tuiCommand.c \
- 	  tuiDisassem.c tuiSourceWin.c tuiRegs.c tuiDataWin.c
- 
- OBJECTS = tui.o tuiData.o tuiSource.o tuiStack.o tuiIO.o \
- 	  tuiGeneralWin.o tuiLayout.o tuiWin.o tuiCommand.o \
- 	  tuiDisassem.o tuiSourceWin.o tuiRegs.o tuiDataWin.o \
- 	  tuiInit.o
- 
- 
- # Prevent Sun make from putting in the machine type.  Setting
- # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
- .c.o:
- 	$(CC) -c $(INTERNAL_CFLAGS) $<
- .SUFFIXES: .cpp
- .c.cpp:
- 	$(CC) -E $(INTERNAL_CFLAGS) $< > $@
- 
- libtui.a: $(OBJECTS)
- 	rm -f libtui.a
- 	$(AR) rc libtui.a $(OBJECTS)
- 	$(RANLIB) libtui.a
- 
- tui.o: tui.c tui.h tuiData.h tuiLayout.h tuiIO.h tuiRegs.h tuiWin.h
- tuiCommand.o: tui.h tuiData.h tuiWin.h tuiIO.h
- tuiData.o: tui.h tuiData.h
- tuiDataWin.o: tui.h tuiData.h tuiRegs.h
- tuiDisassem.o: tui.h tuiData.h tuiLayout.h tuiSourceWin.h tuiStack.h
- tuiGeneralWin.o: tui.h tuiData.h tuiGeneralWin.h
- tuiIO.o: tui.h tuiData.h tuiIO.h tuiCommand.h tuiWin.h
- tuiLayout.o: tui.h tuiData.h tuiGeneralWin.h tuiStack.h tuiRegs.h \
- 	tuiDisassem.h
- tuiRegs.o: tui.h tuiData.h tuiLayout.h tuiWin.h
- tuiSource.o: tui.h tuiData.h tuiStack.h tuiSourceWin.h tuiSource.h
- tuiSourceWin.o: tui.h tuiData.h tuiStack.h tuiSourceWin.h tuiSource.h \
- 	tuiDisassem.h
- tuiStack.o: tui.h tuiData.h tuiStack.h tuiSourceWin.h
- tuiWin.o: tui.h tuiData.h tuiGeneralWin.h tuiStack.h tuiSourceWin.h \
- 	tuiDataWin.h
- 
- tuiInit.o: tuiInit.c
- tuiInit.c: $(SOURCES)
- 	@echo Making tuiInit.c
- 	@rm -f init.c-tmp
- 	@echo '/* Do not modify this file.  */' >init.c-tmp
- 	@echo '/* It is created automatically by the Makefile.	*/'>>init.c-tmp
- 	@echo '#include "ansidecl.h"' >>init.c-tmp
- 	@echo 'extern void initialize_tui_files PARAMS ((void));' >>init.c-tmp
- 	@echo 'void initialize_tui_files PARAMS ((void)) {' >>init.c-tmp
- 	@-( cd $(srcdir) ; grep '^_initialize_[a-z_0-9A-Z]* *(' $(SOURCES) ) 2>/dev/null \
- 	| sed -e 's/^.*://' -e 's/^\([a-z_0-9A-Z]*\).*/  {extern void \1 PARAMS ((void)); \1 ();}/' >>init.c-tmp
- 	@echo '}' >>init.c-tmp
- 	@mv init.c-tmp tuiInit.c
- 
- clean mostlyclean:
- 	-rm -f *.o *.a
- 
- distclean maintainer-clean realclean: clean
- 	-rm -f Makefile config.log config.cache
--- 0 ----