This is the mail archive of the gdb-patches@sourceware.cygnus.com mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: [RFA] tcl/tk Makefile fixes


This is cool. Please check it in.

At 10:12 PM 6/6/00 -0400, Chris Faylor wrote:
>While preparing a new version of the gdb executable for a cygwin net
>release I noticed that the tcl/tk family of makefiles do not honor
>overrides like:
>
>make prefix=/some/directory
>
>I have found it convenient to build gdb giving a "standard" configuration
>but then to install gdb in an alternate location for packaging into a
>tar file.  This seems to work fine with everything but the tcl/tk family
>of Makefiles.
>
>The patch below changes all of the appropriate Makefiles that are used
>in a Windows install.  The changes are pretty straightforward.  They add
>a typical autoconf variable at the top of each Makefile and then use
>that variable throughout.  This allows the variables to be overridden on
>the command line.
>
>The changes aren't as comprehensive as they could be.  I left some
>variables that did not seem to be causing any problems when I did a
>"make prefix=/somewhere install".  For completeness, it might be nice to
>change those, too at some point.
>
>I've provided a typical ChangeLog entry rather than six identical entries
>for six different ChangeLogs.
>
>cgf
>
>Tue Jun  6 22:09:02 2000  Christopher Faylor <cgf@cygnus.com>
>
>         * win/Makefile.in: Set up and use autoconf variables throughout to
>         allow overriding variables from the make command line.
>
>Index: itcl/itcl/win/Makefile.in
>===================================================================
>RCS file: /cvs/src/src/itcl/itcl/win/Makefile.in,v
>retrieving revision 1.1.1.1
>diff -u -p -r1.1.1.1 Makefile.in
>--- Makefile.in 2000/02/07 00:19:46     1.1.1.1
>+++ Makefile.in 2000/06/07 00:49:52
>@@ -12,6 +12,11 @@ prefix = @prefix@
>  exec_prefix = @exec_prefix@
>  VPATH = @srcdir@:@srcdir@/../generic:@srcdir@/../unix
>  srcdir = @srcdir@
>+libdir=@libdir@
>+bindir=@bindir@
>+includedir=@includedir@
>+mandir=@mandir@
>+datadir=@datadir@
>
>  CC = @CC@
>  CFLAGS = @CFLAGS@
>@@ -82,21 +87,21 @@ ITCLSHRES   = @ITCLSHRES@
>  # Directory in which to install the library of Itcl scripts and demos
>  # (note: you can set the ITCL_LIBRARY environment variable at run-time to
>  # override the compiled-in location):
>-ITCL_LIBRARY = $(prefix)/share/itcl$(ITCL_VERSION)
>+ITCL_LIBRARY = $(datadir)/itcl$(ITCL_VERSION)
>
>-# CYGNUS LOCAL: dj - use @dir@ form
>+# CYGNUS LOCAL: cgf - use autoconf variables
>
>  # Directory in which to install the archive libitcl.a:
>-INSTALL_LIB_DIR =      @libdir@
>+INSTALL_LIB_DIR =      $(libdir)
>
>  # Directory in which to install the program itclsh:
>-INSTALL_BIN_DIR =      @bindir@
>+INSTALL_BIN_DIR =      $(bindir)
>
>  # Directory in which to install the include file itcl.h:
>-INSTALL_INCLUDE_DIR =  @includedir@
>+INSTALL_INCLUDE_DIR =  $(includedir)
>
>  # Top-level directory for manual entries:
>-INSTALL_MAN_DIR =      @mandir@
>+INSTALL_MAN_DIR =      $(mandir)
>
>  # Directory in which to install manual entry for itclsh:
>  INSTALL_MAN1_DIR =     $(INSTALL_MAN_DIR)/man1
>Index: itcl/itk/win/Makefile.in
>===================================================================
>RCS file: /cvs/src/src/itcl/itk/win/Makefile.in,v
>retrieving revision 1.1.1.1
>diff -u -p -r1.1.1.1 Makefile.in
>--- Makefile.in 2000/02/07 00:19:46     1.1.1.1
>+++ Makefile.in 2000/06/07 00:49:52
>@@ -12,6 +12,11 @@ prefix = @prefix@
>  exec_prefix = @exec_prefix@
>  VPATH = @srcdir@:@srcdir@/../generic:@srcdir@/../unix
>  srcdir = @srcdir@
>+libdir=@libdir@
>+bindir=@bindir@
>+includedir=@includedir@
>+mandir=@mandir@
>+datadir=@datadir@
>
>  CC = @CC@
>  CFLAGS = @CFLAGS@
>@@ -96,16 +101,16 @@ ITKWISHRES = @ITKWISHRES@
>  ITK_LIBRARY =  $(prefix)/share/itk$(ITCL_VERSION)
>
>  # Directory in which to install the archive libitcl.a:
>-INSTALL_LIB_DIR =      @libdir@
>+INSTALL_LIB_DIR =      $(libdir)
>
>  # Directory in which to install the program itclsh:
>-INSTALL_BIN_DIR =      @bindir@
>+INSTALL_BIN_DIR =      $(bindir)
>
>  # Directory in which to install the include file itcl.h:
>-INSTALL_INCLUDE_DIR =  @includedir@
>+INSTALL_INCLUDE_DIR =  $(includedir)
>
>  # Top-level directory for manual entries:
>-INSTALL_MAN_DIR =      @mandir@
>+INSTALL_MAN_DIR =      $(mandir)
>
>  # Directory in which to install manual entry for itclsh:
>  INSTALL_MAN1_DIR =     $(INSTALL_MAN_DIR)/man1
>Index: itcl/iwidgets3.0.0/unix/Makefile.in
>===================================================================
>RCS file: /cvs/src/src/itcl/iwidgets3.0.0/unix/Makefile.in,v
>retrieving revision 1.1.1.1
>diff -u -p -r1.1.1.1 Makefile.in
>--- Makefile.in 2000/02/07 00:19:47     1.1.1.1
>+++ Makefile.in 2000/06/07 00:49:53
>@@ -28,6 +28,12 @@ VERSION = $(ITCL_VERSION).$(IWIDGETS_VER
>
>  prefix =       @prefix@
>  exec_prefix =  @exec_prefix@
>+srcdir = @srcdir@
>+libdir=@libdir@
>+bindir=@bindir@
>+includedir=@includedir@
>+mandir=@mandir@
>+datadir=@datadir@
>
>  # The following definition can be set to non-null for special systems
>  # like AFS with replication.  It allows the pathnames used for installation
>@@ -40,23 +46,23 @@ INSTALL_ROOT =
>  # Directory from which applications will reference the library of
>  # [incr Widgets] scripts (note: you can set the IWIDGETS_LIBRARY environment
>  # variable at run-time to override this value):
>-IWIDGETS_LIBRARY = $(prefix)/share/iwidgets$(VERSION)
>+IWIDGETS_LIBRARY = $(datadir)/iwidgets$(VERSION)
>  # END CYGNUS LOCAL
>
>  # Path name to use when installing library scripts:
>  SCRIPT_INSTALL_DIR = $(INSTALL_ROOT)$(IWIDGETS_LIBRARY)
>
>  # Directory in which to install the archive libtcl.a:
>-LIB_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/lib
>+LIB_INSTALL_DIR = $(INSTALL_ROOT)$(libdir)
>
>  # Directory in which to install the program tclsh:
>-BIN_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/bin
>+BIN_INSTALL_DIR = $(INSTALL_ROOT)$(bindir)
>
>  # Directory in which to install the include file itcl.h:
>-INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/include
>+INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(includedir)
>
>  # Top-level directory in which to install manual entries:
>-MAN_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/man
>+MAN_INSTALL_DIR = $(INSTALL_ROOT)$(mandir)
>
>  # Directory in which to install manual entry for itclsh:
>  MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1
>@@ -76,25 +82,25 @@ HTML_INSTALL_DIR = $(INSTALL_ROOT)$(pref
>  TCL_LIB_DIR = @TCL_LIB_DIR@
>
>  # Directory containing Tcl source code (for library used during test):
>-TCL_SRC_DIR = @TCL_SRC_DIR@
>+TCL_SRC_DIR = ${srcdir}/../../../../tcl
>
>  # Tk libraries can be found here:
>  TK_LIB_DIR = @TK_LIB_DIR@
>
>  # Directory containing Tk source code (for library used during test):
>-TK_SRC_DIR = @TK_SRC_DIR@
>+TK_SRC_DIR = ${srcdir}/../../../tk
>
>  # Itcl libraries can be found here:
>  ITCL_LIB_DIR = @ITCL_LIB_DIR@
>
>  # Directory containing Itcl source code (for library used during test):
>-ITCL_SRC_DIR = @ITCL_SRC_DIR@
>+ITCL_SRC_DIR = ${srcdir}/../../itcl
>
>  # Itk libraries can be found here:
>  ITK_LIB_DIR = @ITK_LIB_DIR@
>
>  # Directory containing Itk source code (for library used during test):
>-ITK_SRC_DIR = @ITK_SRC_DIR@
>+ITK_SRC_DIR = ${srcdir}/../../itk
>
>  # [incr Tk] build directory containing the itkwish binary for 'make test'
>  ITK_BIN_DIR = ../../itk/unix
>Index: tcl/win/Makefile.in
>===================================================================
>RCS file: /cvs/src/src/tcl/win/Makefile.in,v
>retrieving revision 1.1.1.1
>diff -u -p -r1.1.1.1 Makefile.in
>--- Makefile.in 1999/11/09 01:28:44     1.1.1.1
>+++ Makefile.in 2000/06/07 00:49:54
>@@ -11,6 +11,10 @@ prefix = @prefix@
>  exec_prefix = @exec_prefix@
>  VPATH = @srcdir@:@srcdir@/../generic:@srcdir@/../compat
>  srcdir = @srcdir@
>+libdir = @libdir@
>+bindir = @bindir@
>+includedir = @includedir@
>+datadir = @datadir@
>
>  INSTALL = @INSTALL@
>  INSTALL_PROGRAM = @INSTALL_PROGRAM@
>@@ -44,19 +48,19 @@ INSTALL_ROOT =
>  # Directory from which applications will reference the library of Tcl
>  # scripts (note: you can set the TCL_LIBRARY environment variable at
>  # run-time to override this value):
>-TCL_LIBRARY =  @datadir@/tcl$(DIRVERSION)
>+TCL_LIBRARY =  $(datadir)/tcl$(DIRVERSION)
>
>  # Path name to use when installing library scripts:
>  SCRIPT_INSTALL_DIR =   $(INSTALL_ROOT)$(TCL_LIBRARY)
>
>  # Directory in which to install libtcl.so or libtcl.a:
>-LIB_INSTALL_DIR =      $(INSTALL_ROOT)@libdir@
>+LIB_INSTALL_DIR =      $(INSTALL_ROOT)$(libdir)
>
>  # Directory in which to install the program tclsh:
>-BIN_INSTALL_DIR =      $(INSTALL_ROOT)@bindir@
>+BIN_INSTALL_DIR =      $(INSTALL_ROOT)$(bindir)
>
>  # Directory in which to install the include file tcl.h:
>-INCLUDE_INSTALL_DIR =  $(INSTALL_ROOT)@includedir@
>+INCLUDE_INSTALL_DIR =  $(INSTALL_ROOT)$(includedir)
>
>  #
>  # Visual C++ 2.x and 4.0 makefile
>Index: tix/win/Makefile.in
>===================================================================
>RCS file: /cvs/src/src/tix/win/Makefile.in,v
>retrieving revision 1.1.1.1
>diff -u -p -r1.1.1.1 Makefile.in
>--- Makefile.in 2000/02/07 00:19:29     1.1.1.1
>+++ Makefile.in 2000/06/07 00:49:55
>@@ -5,6 +5,12 @@ prefix = @prefix@
>  exec_prefix = @exec_prefix@
>  VPATH = @srcdir@:@srcdir@/../generic
>  srcdir = @srcdir@
>+libdir=@libdir@
>+bindir=@bindir@
>+includedir=@includedir@
>+mandir=@mandir@
>+datadir=@datadir@
>+host_alias=@host_alias@
>
>  CC = @CC@
>  CFLAGS = @CFLAGS@
>@@ -428,21 +434,21 @@ TIX_VERSION = @TIX_VERSION@
>  # Directory in which to install the library of Tix scripts and demos
>  # (note: you can set the TIX_LIBRARY environment variable at run-time to
>  # override the compiled-in location):
>-TIX_LIBRARY =  $(prefix)/share/tix$(TIX_VERSION)
>+TIX_LIBRARY =  $(datadir)/tix$(TIX_VERSION)
>
>  # CYGNUS LOCAL: dj - change to autoconf'd directories
>
>  # Directory in which to install the archive libtix.a:
>-LIB_DIR =      @libdir@
>+LIB_DIR =      $(libdir)
>
>  # Directory in which to install the program wish:
>-BIN_DIR =      @bindir@
>+BIN_DIR =      $(bindir)
>
>  # Directory in which to install the include file tix.h:
>-INCLUDE_DIR =  @includedir@
>+INCLUDE_DIR =  $(includedir)
>
>  # Top-level directory for manual entries:
>-MAN_DIR =      @mandir@
>+MAN_DIR =      $(mandir)
>
>  # Directory in which to install manual entry for wish:
>  MAN1_DIR =     $(MAN_DIR)/man1
>Index: tk/win/Makefile.in
>===================================================================
>RCS file: /cvs/src/src/tk/win/Makefile.in,v
>retrieving revision 1.1.1.1
>diff -u -p -r1.1.1.1 Makefile.in
>--- Makefile.in 2000/02/07 00:19:30     1.1.1.1
>+++ Makefile.in 2000/06/07 00:49:56
>@@ -19,8 +19,14 @@
>
>  prefix = @prefix@
>  exec_prefix = @exec_prefix@
>-VPATH = 
>@srcdir@:@srcdir@/../xlib:@srcdir@/../generic:@srcdir@/../unix:@srcdir@/../ 
>win/rc
>  srcdir = @srcdir@
>+VPATH = 
>$(srcdir):$(srcdir)/../xlib:$(srcdir)/../generic:$(srcdir)/../unix:$(srcdir 
>)/../win/rc
>+libdir=@libdir@
>+bindir=@bindir@
>+includedir=@includedir@
>+mandir=@mandir@
>+datadir=@datadir@
>+host_alias=@host_alias@
>
>  INSTALL = @INSTALL@
>  INSTALL_PROGRAM = @INSTALL_PROGRAM@
>@@ -53,23 +59,23 @@ INSTALL_ROOT =
>  # Directory from which applications will reference the library of Tcl
>  # scripts (note: you can set the TK_LIBRARY environment variable at
>  # run-time to override the compiled-in location):
>-TK_LIBRARY =           @datadir@/tk$(DIRVERSION)
>+TK_LIBRARY =           $(datadir)/tk$(DIRVERSION)
>
>  # Path name to use when installing library scripts:
>  SCRIPT_INSTALL_DIR =   $(INSTALL_ROOT)$(TK_LIBRARY)
>
>  # Directory in which to install the .a or .so binary for the Tk library:
>-LIB_INSTALL_DIR =      $(INSTALL_ROOT)@libdir@
>+LIB_INSTALL_DIR =      $(INSTALL_ROOT)$(libdir)
>
>  # Directory in which to install the program wish:
>-BIN_INSTALL_DIR =      $(INSTALL_ROOT)@bindir@
>+BIN_INSTALL_DIR =      $(INSTALL_ROOT)$(bindir)
>
>  # Directory in which to install the include file tk.h:
>-INCLUDE_INSTALL_DIR =  $(INSTALL_ROOT)@includedir@
>+INCLUDE_INSTALL_DIR =  $(INSTALL_ROOT)$(includedir)
>
>  # Directory in which to install the X11 header files.  These files are
>  # not machine independent, so they should not go in includedir.
>-X11_INCLUDE_INSTALL_DIR = 
>$(INSTALL_ROOT)@exec_prefix@/@host_alias@/include/X11
>+X11_INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(includedir)/X11
>
>  DEMOPROGS = browse hello ixset rmt rolodex square tcolor timer widget
>

Syd Polk		spolk@redhat.com
Engineering Manager	+1 415 777 9810 x 241
Cygnus Solutions,a Red Hat company



Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]