This is the mail archive of the
gdb-patches@sources.redhat.com
mailing list for the GDB project.
Re: [RFA] Testsuite: skip tests that depend on stdio support.
- To: Michael Snyder <msnyder at cygnus dot com>
- Subject: Re: [RFA] Testsuite: skip tests that depend on stdio support.
- From: Fernando Nasser <fnasser at cygnus dot com>
- Date: Mon, 16 Oct 2000 21:38:04 -0400
- CC: gdb-patches at sourceware dot cygnus dot com, ezannoni at cygnus dot com, fnasser at cygnus dot com
- Organization: Red Hat , Inc. - Toronto
- References: <200010140028.RAA15256@happy.cygnus.com>
Michael, the part described in the ChangeLog is OK, however...
You are also adding (without a proper ChangeLog entry) a clause to gdb_test that
considers as failed if the test program ends normally. I believe there are some tests
that run a program to the end and they'll not be able to use gdb_test (so you may have
to change these tests if we decide this is the way to go).
Anyway, the skipping part is approved, the changes to gdb_test are not (pending
proper submission).
Regards,
Fernando
Michael Snyder wrote:
>
> Here is a new utility function that returns true if the target does NOT
> support stdio. This is true for instance on remote stubs that do not
> convert printfs to "O" packets. Some tests must be skipped if they
> depend on printf output from the child.
>
> While I was at it, I made a similar function for floating point support.
>
> 2000-10-13 Michael Snyder <msnyder@cleaver.cygnus.com>
>
> * lib/gdb.exp (gdb_skip_float_test): New proc. Skip test if
> no floating point support.
> (gdb_skip_stdio_test): New proc. Skip test if no stdio support.
> * gdb.base/call-ar-st.exp: Use above procs to skip tests.
>
> Index: lib/gdb.exp
> ===================================================================
> RCS file: /cvs/cvsfiles/devo/gdb/testsuite/lib/gdb.exp,v
> retrieving revision 1.156
> diff -c -p -r1.156 gdb.exp
> *** gdb.exp 2000/03/14 06:47:51 1.156
> --- gdb.exp 2000/10/14 00:25:48
> *************** proc gdb_test { args } {
> *** 502,507 ****
> --- 502,516 ----
> fail "$errmsg"
> return -1
> }
> + -re "Program exited normally.*$gdb_prompt $" {
> + if ![string match "" $message] then {
> + set errmsg "$message: the program exited normally"
> + } else {
> + set errmsg "$command: the program exited normally"
> + }
> + fail "$errmsg"
> + return -1
> + }
> -re "The program is not being run.*$gdb_prompt $" {
> if ![string match "" $message] then {
> set errmsg "$message: the program is no longer running"
> *************** proc gdbtk_analyze_results {results} {
> *** 1686,1689 ****
> --- 1695,1724 ----
> }
> }
> }
> + }
> +
> + # Print a message and return true if a test should be skipped
> + # due to lack of floating point suport.
> +
> + proc gdb_skip_float_test { msg } {
> + if [target_info exists gdb,skip_float_tests] {
> + verbose "Skipping test '$msg': no float tests.";
> + return 1;
> + }
> + return 0;
> + }
> +
> + # Print a message and return true if a test should be skipped
> + # due to lack of stdio support.
> +
> + proc gdb_skip_stdio_test { msg } {
> + if [target_info exists gdb,noinferiorio] {
> + verbose "Skipping test '$msg': no inferior i/o.";
> + return 1;
> + }
> + return 0;
> + }
> +
> + proc gdb_skip_bogus_test { msg } {
> + return 0;
> }
> Index: gdb.base/call-ar-st.exp
> ===================================================================
> RCS file: /cvs/cvsfiles/devo/gdb/testsuite/gdb.base/call-ar-st.exp,v
> retrieving revision 1.18
> diff -c -p -r1.18 call-ar-st.exp
> *** call-ar-st.exp 2000/07/04 02:42:48 1.18
> --- call-ar-st.exp 2000/10/14 00:25:48
> *************** proc set_lang_c {} {
> *** 85,94 ****
> }
> }
>
> -
> source ${binfile}.ci
>
>
> # Start with a fresh gdb.
>
> gdb_exit
> --- 85,107 ----
> }
> }
>
> source ${binfile}.ci
>
> + proc call_ar_skip_test { testname } {
> + global ret;
>
> + set ret 0;
> + if {![target_info exists gdb,skip_float_tests]} {
> + set ret 1;
> + verbose "Skipping test '$testname': no float tests.";
> + }
> + if {![target_info exists gdb,noinferiorio]} {
> + set ret 1;
> + verbose "Skipping test '$testname': no inferior io.";
> + }
> + return $ret;
> + }
> +
> # Start with a fresh gdb.
>
> gdb_exit
> *************** gdb_test continue \
> *** 116,122 ****
>
>
> #call print_double_array(double_array)
> ! if {![target_info exists gdb,skip_float_tests]} {
> send_gdb "print print_double_array(double_array)\n"
> gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" {
> "\[ \t\r\n\]+array_d :"
> --- 129,136 ----
>
>
> #call print_double_array(double_array)
> ! if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
> ! ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
> send_gdb "print print_double_array(double_array)\n"
> gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" {
> "\[ \t\r\n\]+array_d :"
> *************** if {![target_info exists gdb,skip_float_
> *** 140,172 ****
>
> #call print_char_array(char_array)
>
> ! send_gdb "print print_char_array(char_array)\n"
> ! gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" {
> ! "\[ \t\r\n\]+array_c :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+\[ \t\r\n\]+Z"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
> }
>
>
>
> #go -until 1216
> gdb_test "tbreak 1216" \
> "Breakpoint.*file.*$srcfile, line 1216.*" \
> "tbreakpoint line 1216"
>
> ! send_gdb "continue\n"
> ! gdb_expect_list "continue to 1216" ".*$gdb_prompt $" {
> ! "\[ \t\r\n\]+array_c :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+\[ \t\r\n\]+Z"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
> ! "\[ \t\r\n\]+main.*at.*:1216"
> ! "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
> }
>
> # I am disabling this test, because it takes too long. I verified by
> --- 154,193 ----
>
> #call print_char_array(char_array)
>
> ! if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
> ! send_gdb "print print_char_array(char_array)\n"
> ! gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" {
> ! "\[ \t\r\n\]+array_c :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+\[ \t\r\n\]+Z"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
> ! }
> }
>
>
>
> +
> #go -until 1216
> gdb_test "tbreak 1216" \
> "Breakpoint.*file.*$srcfile, line 1216.*" \
> "tbreakpoint line 1216"
>
> ! if ![gdb_skip_stdio_test "continue to 1216"] {
> ! send_gdb "continue\n"
> ! gdb_expect_list "continue to 1216" ".*$gdb_prompt $" {
> ! "\[ \t\r\n\]+array_c :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+\[ \t\r\n\]+Z"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
> ! "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
> ! "\[ \t\r\n\]+main.*at.*:1216"
> ! "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
> ! }
> ! } else {
> ! gdb_test "continue" "" ""
> }
>
> # I am disabling this test, because it takes too long. I verified by
> *************** gdb_expect_list "continue to 1216" ".*$g
> *** 184,257 ****
> #set timeout $oldtimeout
> #go -until 1220
> gdb_test "tbreak 1220" \
> ! "Breakpoint.* file .*$srcfile, line 1220.*" \
> ! "tbreakpoint line 1220"
>
> ! send_gdb "continue\n"
> ! gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" {
> ! "Continuing\\."
> ! "\[ \t\r\n\]+array_d :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+0.000000"
> ! "\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600"
> ! "\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200"
> ! "\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800"
> ! "\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400"
> ! "\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000"
> ! "\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600"
> ! "\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200"
> ! "\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800"
> ! "\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400"
> ! "\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000"
> ! "\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600"
> ! "\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200"
> ! "\[ \t\r\n\]+2275.299900 2298.756600 2322.213300\[ \t\r\n\]+\[ \t\r\n\]+"
> ! ".*array_f :"
> ! ".*student id :\[\t \]+.*YELLOW"
> ! ".*array_i :"
> ! ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
> }
>
> #step
> ! send_gdb "step\n"
> ! gdb_expect {
> ! -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"}
> ! -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" }
> ! timeout { fail "step inside print_all_arrays (timeout)" }
> ! }
>
>
> #step -over
> send_gdb "next\n"
> gdb_expect {
> ! -re "array_i :.*307.*print_char_array\\(array_c\\);.*$gdb_prompt $" {pass "next over print_int_array in print-all_arrays"}
> ! -re ".*$gdb_prompt $" { fail "next over print_int_array in print-all_arrays" }
> ! timeout { fail "next over print_int_array in print-all_arrays (timeout)" }
> }
> !
> !
>
> #call print_double_array(array_d)
> ! if {![target_info exists gdb,skip_float_tests]} {
> ! send_gdb "print print_double_array(array_d)\n"
> ! gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" {
> ! "array_d :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
> ! "\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600"
> ! "\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200"
> ! "\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800"
> ! "\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400"
> ! "\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000"
> ! "\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600"
> ! "\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200"
> ! "\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800"
> ! "\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400"
> ! "\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000"
> ! "\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600"
> ! "\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200"
> ! "\[ \t\r\n\]+2275.299900 2298.756600 2322.213300\[ \t\r\n\]+\[ \t\r\n\]+"
> ! }
> }
>
> #go -until 1236
> --- 205,292 ----
> #set timeout $oldtimeout
> #go -until 1220
> gdb_test "tbreak 1220" \
> ! "Breakpoint.* file .*$srcfile, line 1220.*" \
> ! "tbreakpoint line 1220"
>
> ! if ![gdb_skip_stdio_test "continuing to breakpoint 1220"] {
> ! send_gdb "continue\n"
> ! gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" {
> ! "Continuing\\."
> ! "\[ \t\r\n\]+array_d :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+0.000000"
> ! "\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600"
> ! "\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200"
> ! "\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800"
> ! "\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400"
> ! "\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000"
> ! "\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600"
> ! "\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200"
> ! "\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800"
> ! "\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400"
> ! "\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000"
> ! "\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600"
> ! "\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200"
> ! "\[ \t\r\n\]+2275.299900 2298.756600 2322.213300\[ \t\r\n\]+\[ \t\r\n\]+"
> ! ".*array_f :"
> ! ".*student id :\[\t \]+.*YELLOW"
> ! ".*array_i :"
> ! ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
> ! }
> ! } else {
> ! gdb_test "continue" "" ""
> }
>
> #step
> ! send_gdb "step\n"
> ! gdb_expect {
> ! -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"}
> ! -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" }
> ! timeout { fail "step inside print_all_arrays (timeout)" }
> ! }
>
>
> #step -over
> + if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
> send_gdb "next\n"
> gdb_expect {
> ! -re "array_i :.*307.*print_char_array.*$gdb_prompt $" {
> ! pass "next over print_int_array in print-all_arrays"
> ! }
> ! -re ".*$gdb_prompt $" {
> ! fail "next over print_int_array in print-all_arrays"
> ! }
> ! timeout {
> ! fail "next over print_int_array in print-all_arrays (timeout)"
> ! }
> }
> ! } else {
> ! gdb_test "next" "" ""
> ! }
>
> + # ???? FIXME MVS ????
> #call print_double_array(array_d)
> ! if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
> ! ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
> ! send_gdb "print print_double_array(array_d)\n"
> ! gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" {
> ! "array_d :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
> ! "\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600"
> ! "\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200"
> ! "\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800"
> ! "\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400"
> ! "\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000"
> ! "\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600"
> ! "\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200"
> ! "\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800"
> ! "\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400"
> ! "\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000"
> ! "\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600"
> ! "\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200"
> ! "\[ \t\r\n\]+2275.299900 2298.756600 2322.213300\[ \t\r\n\]+\[ \t\r\n\]+"
> ! }
> }
>
> #go -until 1236
> *************** gdb_test "tbreak 1236" \
> *** 259,316 ****
> "Breakpoint.* file .*$srcfile, line 1236.*" \
> "tbreakpoint line 1236"
>
> ! send_gdb "continue\n"
> ! gdb_expect_list "continuing to 1236" ".*$gdb_prompt $" {
> ! "Continuing\\..*array_c"
> ! ".*array_f"
> ! "\[ \t\r\n\]+array_d :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+0.000000"
> ! "\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600"
> ! "\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200"
> ! "\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800"
> ! "\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400"
> ! "\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000"
> ! "\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600"
> ! "\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200"
> ! "\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800"
> ! "\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400"
> ! "\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000"
> ! "\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600"
> ! "\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200"
> ! "\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
> }
>
>
> #call sum_array_print(10, *list1, *list2, *list3, *list4)
>
> ! send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n"
> ! gdb_expect {
> ! -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" {
> ! pass "print sum_array_print(10, *list1, *list2, *list3, *list4)"
> ! }
> ! -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" }
> ! timeout { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
> ! }
>
> #step over
> ! send_gdb "n\n"
> ! gdb_expect {
> ! -re ".*BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1237"}
> ! -re ".*$gdb_prompt $" { fail "next to 1237" }
> ! timeout { fail "next to 1237(timeout)" }
> }
>
> #call print_array_rep(\*list1, \*list2, \*list3)
>
> ! send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n"
> ! gdb_expect {
> ! -re ".*$gdb_prompt $" {
> ! pass "print print_array_rep(*list1, *list2, *list3)"
> ! }
> ! -re ".*$gdb_prompt $" { fail "print print_array_rep(*list1, *list2, *list3)" }
> ! timeout { fail "(timeout) print print_array_rep(*list1, *list2, *list3)" }
> ! }
>
> #go -until 1241
> gdb_test "tbreak 1241" \
> --- 294,367 ----
> "Breakpoint.* file .*$srcfile, line 1236.*" \
> "tbreakpoint line 1236"
>
> ! if ![gdb_skip_stdio_test "continuing to 1236"] {
> ! send_gdb "continue\n"
> ! gdb_expect_list "continuing to 1236" ".*$gdb_prompt $" {
> ! "Continuing\\..*array_c"
> ! ".*array_f"
> ! "\[ \t\r\n\]+array_d :"
> ! "\[ \t\r\n\]+========="
> ! "\[ \t\r\n\]+0.000000"
> ! "\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600"
> ! "\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200"
> ! "\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800"
> ! "\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400"
> ! "\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000"
> ! "\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600"
> ! "\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200"
> ! "\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800"
> ! "\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400"
> ! "\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000"
> ! "\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600"
> ! "\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200"
> ! "\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
> ! }
> ! } else {
> ! gdb_test "continue" "" ""
> }
>
>
> #call sum_array_print(10, *list1, *list2, *list3, *list4)
>
> ! if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
> ! send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n"
> ! gdb_expect {
> ! -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" {
> ! pass "print sum_array_print(10, *list1, *list2, *list3, *list4)"
> ! }
> ! -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" }
> ! timeout { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
> ! }
> ! }
>
> #step over
> ! if ![gdb_skip_stdio_test "next to 1237"] {
> ! send_gdb "next\n"
> ! gdb_expect {
> ! -re ".*BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1237"}
> ! -re ".*$gdb_prompt $" { fail "next to 1237" }
> ! timeout { fail "next to 1237(timeout)" }
> ! }
> ! } else {
> ! gdb_test "next" "" ""
> }
>
> #call print_array_rep(\*list1, \*list2, \*list3)
>
> ! if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
> ! send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n"
> ! gdb_expect {
> ! -re ".*$gdb_prompt $" {
> ! pass "print print_array_rep(*list1, *list2, *list3)"
> ! }
> ! -re ".*$gdb_prompt $" {
> ! fail "print print_array_rep(*list1, *list2, *list3)"
> ! }
> ! timeout {
> ! fail "(timeout) print print_array_rep(*list1, *list2, *list3)"
> ! }
> ! }
> ! }
>
> #go -until 1241
> gdb_test "tbreak 1241" \
> *************** gdb_test "tbreak 1281" \
> *** 361,377 ****
> "Breakpoint.* file .*call-ar-st.c, line 1281.*" \
> "tbreakpoint line 1281"
>
> ! send_gdb "continue\n"
> ! gdb_expect {
> ! -re "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*$gdb_prompt $" {
> ! pass "continue to 1281"}
> ! -re ".*$gdb_prompt $" { fail "continue to 1281"}
> ! timeout { fail "(timeout) continue to 1281"}
> }
>
> ! #call print_small_structs(*struct1, *struct2, *struct3, *struct4,*flags, *flags_combo,
> ! #*three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
> ! if {![target_info exists gdb,skip_float_tests]} {
> send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
> gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" {
> "\[\t\r\n \]+alpha"
> --- 412,436 ----
> "Breakpoint.* file .*call-ar-st.c, line 1281.*" \
> "tbreakpoint line 1281"
>
> ! if ![gdb_skip_stdio_test "continuing to 1281"] {
> ! send_gdb "continue\n"
> ! gdb_expect {
> ! -re "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*$gdb_prompt $" {
> ! pass "continue to 1281"
> ! }
> ! -re ".*$gdb_prompt $" { fail "continue to 1281"}
> ! timeout { fail "(timeout) continue to 1281"}
> ! }
> ! } else {
> ! gdb_test "continue" "" ""
> }
>
> ! #call print_small_structs(*struct1, *struct2, *struct3, *struct4,
> ! # *flags, *flags_combo, *three_char, *five_char,
> ! # *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
> !
> ! if {![gdb_skip_float_test "print print_small_structs(...)"] && \
> ! ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
> send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
> gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" {
> "\[\t\r\n \]+alpha"
> *************** gdb_expect {
> *** 420,428 ****
> timeout { fail "(timeout) compute_with_small_structs(20)" }
> }
>
>
> ! #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)
> ! if {![target_info exists gdb,skip_float_tests]} {
> send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
> gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" {
> "\[\t\r\n \]+Two Doubles : 123.456000.*123.456000"
> --- 479,490 ----
> timeout { fail "(timeout) compute_with_small_structs(20)" }
> }
>
> +
> + #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
> + # 3.14, -5678.12345, -0.11111111, 216.97065)
>
> ! if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
> ! ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
> send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
> gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" {
> "\[\t\r\n \]+Two Doubles : 123.456000.*123.456000"
> *************** if { [istarget "hppa*-*-hpux*"] } {
> *** 469,475 ****
> # overflows or something, and expect can't deal with the full
> # line. Perhaps a more elegant solution exists... -sts 1999-08-17
> send_gdb "continue\n"
> ! if {![target_info exists gdb,skip_float_tests]} {
> gdb_expect {
> -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { pass "step into print_long_arg_list" }
> -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list (short match)"}
> --- 531,537 ----
> # overflows or something, and expect can't deal with the full
> # line. Perhaps a more elegant solution exists... -sts 1999-08-17
> send_gdb "continue\n"
> ! if {![gdb_skip_float_test "step into print_long_arg_list"]} {
> gdb_expect {
> -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { pass "step into print_long_arg_list" }
> -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list (short match)"}
> *************** if { [istarget "hppa*-*-hpux*"] } {
> *** 488,495 ****
>
> set ws "\[\n\r\t \]+"
>
> ! #call print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)
> ! if {![target_info exists gdb,skip_float_tests]} {
> # On Solaris, some of the args are passed by ref, others by value,
> # and GDB gets confused and says "Invalid cast" because it thinks
> # it has to cast the structure into a pointer to structure. A real
> --- 550,561 ----
>
> set ws "\[\n\r\t \]+"
>
> ! #call print_small_structs(struct1, struct2, struct3, struct4, flags,
> ! # flags_combo, three_char, five_char, int_char_combo,
> ! # d1, d2, d3, f1, f2, f3)
> !
> ! if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
> ! ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
> # On Solaris, some of the args are passed by ref, others by value,
> # and GDB gets confused and says "Invalid cast" because it thinks
> # it has to cast the structure into a pointer to structure. A real
> *************** gdb_test "tbreak 1300" \
> *** 539,546 ****
> "Breakpoint.* file .*call-ar-st.c, line 1300.*" \
> "tbreakpoint line 1300"
>
> ! gdb_test continue "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
> ! "continue to 1300"
>
> #step
> send_gdb "step\n"
> --- 605,616 ----
> "Breakpoint.* file .*call-ar-st.c, line 1300.*" \
> "tbreakpoint line 1300"
>
> ! if ![gdb_skip_stdio_test "continuing to 1300"] {
> ! gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
> ! "continue to 1300"
> ! } else {
> ! gdb_test "continue" "" ""
> ! }
>
> #step
> send_gdb "step\n"
> *************** init_bit_flags_combo \\(bit_flags_combo=
> *** 553,566 ****
> }
>
> #call print_bit_flags_combo(*bit_flags_combo)
> ! send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n"
> ! gdb_expect {
> ! -re ".*alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*$gdb_prompt $" {
> ! pass "print print_bit_flags_combo from init_bit_flags_combo"
> ! }
> ! -re ".*$gdb_prompt $" { fail "print print_bit_flags_combo from init_bit_flags_combo" }
> ! timeout { fail "(timeout) print_bit_flags_combo from init_bit_flags_combo" }
> ! }
>
>
> #go -until 1305
> --- 623,642 ----
> }
>
> #call print_bit_flags_combo(*bit_flags_combo)
> ! if ![gdb_skip_stdio_test "continuing to 1300"] {
> ! send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n"
> ! gdb_expect {
> ! -re ".*alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*$gdb_prompt $" {
> ! pass "print print_bit_flags_combo from init_bit_flags_combo"
> ! }
> ! -re ".*$gdb_prompt $" {
> ! fail "print print_bit_flags_combo from init_bit_flags_combo"
> ! }
> ! timeout {
> ! fail "(timeout) print_bit_flags_combo from init_bit_flags_combo"
> ! }
> ! }
> ! }
>
>
> #go -until 1305
> *************** gdb_test continue "Continuing\\..*main \
> *** 579,585 ****
>
> if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
>
> ! if {![target_info exists gdb,skip_float_tests]} {
> send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
> gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" {
> "\[ \n\r\t\]+double : 22.250000"
> --- 655,662 ----
>
> if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
>
> ! if {![gdb_skip_float_test "print print_long_arg_list"] && \
> ! ![gdb_skip_stdio_test "print print_long_arg_list"] } {
> send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
> gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" {
> "\[ \n\r\t\]+double : 22.250000"
> *************** gdb_test continue "Continuing\\..*main \
> *** 632,666 ****
>
>
> #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
> ! send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n"
> ! gdb_expect {
> ! -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" {
> ! pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
> ! }
> ! -re ".*$gdb_prompt $" { fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" }
> ! timeout { fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" }
> ! }
>
>
> #call print_struct_rep(*struct1, *struct2, *struct3)
> ! send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
> ! gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" ".*$gdb_prompt $" {
> ! "\[ \t\n\r\]+Contents of struct1:"
> ! "\[ \t\n\r\]+ 22 0"
> ! "\[ \t\n\r\]+Contents of struct2:"
> ! "\[ \t\n\r\]+ 42 0"
> ! "\[ \t\n\r\]+Contents of struct3:"
> ! "\[ \t\n\r\]+ 62 0"
> }
>
> ! send_gdb "print print_one_large_struct(*list1)\n"
> ! gdb_expect {
> ! -re ".* 4 1.*$gdb_prompt $" {
> ! pass "print print_one_large_struct(*list1)"
> ! }
> ! -re ".*$gdb_prompt $" { fail "print print_one_large_struct(*list1)" }
> ! timeout { fail "(timeout) print_one_large_struct(*list1)" }
> ! }
>
> return
>
> --- 709,758 ----
>
>
> #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
> ! if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
> ! send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n"
> ! gdb_expect {
> ! -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" {
> ! pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
> ! }
> ! -re ".*$gdb_prompt $" {
> ! fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
> ! }
> ! timeout {
> ! fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
> ! }
> ! }
> ! }
>
>
> #call print_struct_rep(*struct1, *struct2, *struct3)
> ! if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
> ! send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
> ! gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" \
> ! ".*$gdb_prompt $" {
> ! "\[ \t\n\r\]+Contents of struct1:"
> ! "\[ \t\n\r\]+ 22 0"
> ! "\[ \t\n\r\]+Contents of struct2:"
> ! "\[ \t\n\r\]+ 42 0"
> ! "\[ \t\n\r\]+Contents of struct3:"
> ! "\[ \t\n\r\]+ 62 0"
> ! }
> }
>
> ! if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
> ! send_gdb "print print_one_large_struct(*list1)\n"
> ! gdb_expect {
> ! -re ".* 4 1.*$gdb_prompt $" {
> ! pass "print print_one_large_struct(*list1)"
> ! }
> ! -re ".*$gdb_prompt $" {
> ! fail "print print_one_large_struct(*list1)"
> ! }
> ! timeout {
> ! fail "(timeout) print_one_large_struct(*list1)"
> ! }
> ! }
> ! }
>
> return
>
--
Fernando Nasser
Red Hat - Toronto E-Mail: fnasser@redhat.com
2323 Yonge Street, Suite #300
Toronto, Ontario M4P 2C9