This is the mail archive of the gdb-patches@sources.redhat.com mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[patch] Remove obsolete testsuite code.


FYI,

Andrew
2002-05-04  Andrew Cagney  <ac131313@redhat.com>

	* gdb.base/default.exp: Remove obsolete code.
	* gdb.c++/misc.exp: Ditto.  Update copyright.
	* gdb.c++/cplusfuncs.exp: Ditto.  Update copyright.
	* gdb.base/whatis.exp: Ditto.  Update copyright.
	* gdb.base/scope.exp: Ditto.  Update copyright.
	* gdb.base/ptype.exp: Ditto.  Update copyright.
	* gdb.base/printcmds.exp: Ditto.  Update copyright.
	* gdb.base/opaque.exp: Ditto.  Update copyright.
	* gdb.base/list.exp: Ditto.
	* gdb.base/funcargs.exp: Ditto.  Update copyright.
	* gdb.hp/gdb.threads-hp/usrthbasic.c: Delete.
	* gdb.hp/gdb.threads-hp/usrthbasic.exp: Delete.
	* gdb.hp/gdb.threads-hp/usrthcore.c: Delete.
	* gdb.hp/gdb.threads-hp/usrthcore.exp: Delete.
	* gdb.hp/gdb.threads-hp/usrthfork.c: Delete.
	* gdb.hp/gdb.threads-hp/usrthfork.exp: Delete.

Index: gdb.base/default.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/default.exp,v
retrieving revision 1.10
diff -u -r1.10 default.exp
--- gdb.base/default.exp	3 May 2002 21:25:08 -0000	1.10
+++ gdb.base/default.exp	4 May 2002 15:04:57 -0000
@@ -61,12 +61,6 @@
     timeout { fail "(timeout) attach" }
 }
 
-# OBSOLETE # FIXME: attach kills the udi connection
-# OBSOLETE if { [istarget "a29k-*-udi"] } {
-# OBSOLETE     gdb_exit
-# OBSOLETE     gdb_start
-# OBSOLETE }
-
 if ![target_info exists use_gdb_stub] {
     gdb_test "break" "No default breakpoint address now." "break"
     foreach i "b br bre brea" {
@@ -75,7 +69,6 @@
 
     
     setup_xfail "mips-idt-*"
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_test "backtrace" "No stack."
 
     # ba and bac are no longer unique command prefixes. So these tests
@@ -84,7 +77,6 @@
     #
     foreach i "bt ba bac" {
 	setup_xfail "mips-idt-*"
-	# OBSOLETE setup_xfail "a29k-*-udi"
 	gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
     }
 } else {
@@ -93,18 +85,10 @@
 
 # This works on the MIPS IDT board, but confuses future tests.
 if ![istarget "mips-idt-*"] then {
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_test "continue" "The program is not being run." "continue"
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
 }
 
-# OBSOLETE # FIXME: continue kills the udi connection
-# OBSOLETE if [istarget "a29k-*-udi"] then {
-# OBSOLETE     gdb_exit
-# OBSOLETE     gdb_start
-# OBSOLETE }
-
 #test call
 gdb_test "call" "The history is empty..*" "call"
 
@@ -152,11 +136,6 @@
 #test detach
 gdb_test "detach" "" "detach"
 
-# OBSOLETE # FIXME: continue kills the udi connection
-# OBSOLETE if [istarget "a29k-*-udi"] then {
-# OBSOLETE     gdb_exit
-# OBSOLETE     gdb_start
-# OBSOLETE }
 if [istarget "h8300-*-hms"] then {
     gdb_exit
     gdb_start
@@ -250,13 +229,10 @@
 }
 
 #test frame "f" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "f" "No stack." "frame \"f\" abbreviation"
 #test frame
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "frame" "No stack." "frame"
 #test fg
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "fg" "The program is not being run." "fg"
 # FIXME: fg kills the udi connection
 #test file
@@ -277,7 +253,6 @@
 }
 
 #test finish
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "finish" "The program is not running." "finish"
 #test forward-search
 # The message here comes from the regexp library, not gdb, and so can
@@ -319,7 +294,6 @@
 #test info address
 gdb_test "info address" "Argument required." "info address"
 #test info all-registers
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
 #test info args
 gdb_test "info args" "No frame selected." "info args"
@@ -364,16 +338,12 @@
 #test info locals
 gdb_test "info locals" "No frame selected." "info locals"
 #test info program
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "info program" "The program being debugged is not being run." "info program"
 #test info registers
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "info registers" "The program has no registers now." "info registers"
 #test info stack "s" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
 #test info stack
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "info stack" "No stack." "info stack"
 #test info set
 # FIXME -- needs to match the entire output
@@ -400,7 +370,6 @@
 #test inspect
 gdb_test "inspect" "The history is empty." "inspect"
 #test jump
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "jump" "The program is not being run." "jump"
 #test kill
 gdb_test "kill" "The program is not being run." "kill"
@@ -414,16 +383,12 @@
 # to deduce the filename from the exec file.
 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
 #test next "n" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
 #test next
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "next" "The program is not being run." "next"
 #test nexti "ni" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
 #test nexti
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "nexti" "The program is not being run." "nexti"
 #test output
 gdb_test "output" "Argument required .expression to compute.*" "output"
@@ -521,7 +486,7 @@
 gdb_test "restore" "You can't do that without a process to debug\."
 
 #test return
-# The middle case accomodated the OBSOLETE a29k, where doing the "ni"
+# The middle case accomodated the obsolete a29k, where doing the "ni"
 # above causes an initial stack to be created.
 gdb_test "return" "No selected frame..*" "return"  "Make .* return now.*y or n. $" "y"
 
@@ -529,10 +494,8 @@
 #test reverse-search
 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
 #test step "s" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
 #test step
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "step" "The program is not being run." "step #1"
 #test search
 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
@@ -717,21 +680,16 @@
 #test show
 gdb_test "show" "confirm:  *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename:  *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save:  *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size:  *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize:  *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements:  *Limit on string chars or array elements to print is 200..*" "show"
 #test stepi "si" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
 #test stepi
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "stepi" "The program is not being run." "stepi"
 #test signal
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "signal" "The program is not being run." "signal"
 #test source
 gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source"
 #test step "s" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
 #test step
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "step" "The program is not being run." "step #2"
 #test symbol-file
 gdb_test "symbol-file" "" "symbol-file"
@@ -802,10 +760,8 @@
 #test tty
 gdb_test "tty" "Argument required .terminal name for running target process.*" "tty"
 #test until "u" abbreviation
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "u" "The program is not running." "until \"u\" abbreviation"
 #test until
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "until" "The program is not running." "until"
 #test undisplay
 # FIXME -- need to dump full output to detailed log
@@ -848,7 +804,6 @@
 #test whatis
 gdb_test "whatis" "The history is empty." "whatis"
 #test where
-# OBSOLETE setup_xfail "a29k-*-udi"
 gdb_test "where" "No stack." "where"
 #test x
 #The case in which it prints a number is for vxgdb.
Index: gdb.base/funcargs.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/funcargs.exp,v
retrieving revision 1.4
diff -u -r1.4 funcargs.exp
--- gdb.base/funcargs.exp	6 Jan 2002 14:42:39 -0000	1.4
+++ gdb.base/funcargs.exp	4 May 2002 15:04:59 -0000
@@ -1,4 +1,4 @@
-# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2002
 # Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
@@ -58,9 +58,6 @@
     gdb_breakpoint call0e
 
     # Run; should stop at call0a and print actual arguments.
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
     gdb_run_cmd
     gdb_expect {
@@ -118,9 +115,6 @@
     gdb_breakpoint call1e;
 
     # Run; should stop at call1a and print actual arguments.
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
     gdb_run_cmd
     gdb_expect {
@@ -184,9 +178,6 @@
     # Run; should stop at call2a and print actual arguments.
 
     setup_xfail "i960-*-*" 1813
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "mips-sgi-irix5*" }
     # The debug info. for "f" is not correct. It's a known bug.
     if {$hp_cc_compiler} {setup_xfail hppa2.0w-*-*}
@@ -285,9 +276,6 @@
     # Run; should stop at call3a and print actual arguments.
     # Try dereferencing the arguments.
 
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_run_cmd
     gdb_expect {
 	 -re ".* call3a \\(cp=$hex \"a.*\", sp=$hex, ip=$hex, lp=$hex\\) .*$gdb_prompt $" { pass "run to call3a" }
@@ -344,9 +332,6 @@
     # Run; should stop at call4a and print actual arguments.
     # Try dereferencing the arguments.
 
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_run_cmd
     gdb_expect {
 	 -re ".* call4a \\(stp=$hex\\) .*$gdb_prompt $" {
@@ -403,9 +388,6 @@
     # Run; should stop at call5a and print actual arguments.
     # Try dereferencing the arguments.
 
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_run_cmd
     gdb_expect {
 	 -re ".* call5a \\(st=\{s1 = 101, s2 = 102\}\\) .*$gdb_prompt $" {
@@ -480,9 +462,6 @@
     # Run; should stop at call6a and print actual arguments.
     # Print backtrace.
 
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_run_cmd
     gdb_expect {
 	 -re ".*Breakpoint $decimal, call6a .*$gdb_prompt $" { pass "run to call6a" }
@@ -754,9 +733,6 @@
     # Run; should stop at call7a and print actual arguments.
     # Print backtrace.
 
-    # OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-    # OBSOLETE # code is broken.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_run_cmd
     gdb_expect {
 	 -re ".*Breakpoint $decimal, call7a .*$gdb_prompt $" {
@@ -983,9 +959,6 @@
     }
 
     if ![istarget sparclet-*-*] {
-	# OBSOLETE # The a29k fails all of these tests, perhaps because the prologue
-	# OBSOLETE # code is broken.
-	# OBSOLETE setup_xfail "a29k-*-udi"
 	send_gdb "backtrace 100\n"
 	gdb_expect_list "recursive passing of structs by value" ".*$gdb_prompt $" {
 	    ".*\[\r\n\]#0 .* hitbottom \\(\\) "
Index: gdb.base/list.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/list.exp,v
retrieving revision 1.6
diff -u -r1.6 list.exp
--- gdb.base/list.exp	26 Mar 2002 14:54:27 -0000	1.6
+++ gdb.base/list.exp	4 May 2002 15:04:59 -0000
@@ -164,12 +164,10 @@
 proc test_list_include_file {} {
     global gdb_prompt
 
-    # OBSOLETE setup_xfail "a29k-*-udi"
     setup_xfail_format "DWARF 1"
     setup_xfail_format "COFF"
     gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file"
 
-    # OBSOLETE setup_xfail "a29k-*-udi"
     setup_xfail_format "DWARF 1"
     setup_xfail_format "COFF"
     gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF"
@@ -231,7 +229,6 @@
     # gcc appears to generate incorrect debugging information for code
     # in include files, which breaks this test.
     # SunPRO cc is the second case below, it's also correct.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1"
 
     # Ultrix gdb takes the second case below; it's also correct.
@@ -396,7 +393,6 @@
     # gcc appears to generate incorrect debugging information for code
     # in include files, which breaks this test.
     # SunPRO cc is the second case below, it's also correct.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     send_gdb "list list0.c:main\n"
     gdb_expect {
 	-re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" {
@@ -410,7 +406,6 @@
     }
 
     # The i960 is a second case
-    # OBSOLETE # The a29k-amd-udi is a second case
 
     # Not sure what the point of having this function be unused is.
     # AIX is legitimately removing it.
@@ -434,7 +429,6 @@
     # SunPRO cc is the third case.
     setup_xfail "rs6000-*-*" 1804
     setup_xfail "powerpc-*-*" 1804
-    # OBSOLETE setup_xfail "a29k-*-udi"
     setup_xfail_format "DWARF 1"
     setup_xfail_format "COFF"
     send_gdb "list list0.h:foo\n"
@@ -456,7 +450,6 @@
     }
 
     # Ultrix gdb is the second case.
-    # OBSOLETE # a29k-amd-udi is the third case.
     send_gdb "list list1.c:bar\n"
     gdb_expect {
 	-re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" {
@@ -473,7 +466,6 @@
     }
 
     # The i960 is a second case
-    # OBSOLETE # The a29k-amd-udi is a second case
 
     # Not sure what the point of having this function be unused is.
     # AIX is legitimately removing it.
Index: gdb.base/opaque.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/opaque.exp,v
retrieving revision 1.3
diff -u -r1.3 opaque.exp
--- gdb.base/opaque.exp	6 Jan 2002 14:42:39 -0000	1.3
+++ gdb.base/opaque.exp	4 May 2002 15:04:59 -0000
@@ -1,4 +1,5 @@
-# Copyright 1992, 1994, 1995, 1996, 1997, 1999 Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2002 Free Software
+# Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -85,7 +86,6 @@
 	global gcc_compiled
 
 	setup_xfail "vax-*-*" "i*86-sequent-bsd*"
-	# OBSOLETE setup_xfail "a29k-*-udi"
 	if {!$gcc_compiled} then {
 		setup_xfail "alpha-*-*" "mips-sgi-irix5*"
 	}
Index: gdb.base/printcmds.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/printcmds.exp,v
retrieving revision 1.6
diff -u -r1.6 printcmds.exp
--- gdb.base/printcmds.exp	6 Jan 2002 14:42:39 -0000	1.6
+++ gdb.base/printcmds.exp	4 May 2002 15:04:59 -0000
@@ -1,5 +1,5 @@
-# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2000, 2002 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -619,25 +619,16 @@
     # (Test may involve inferior malloc() calls).
     set timeout 60;
 
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p \"a string\""		" = \"a string\""
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p \"embedded \\000 null\"" " = \"embedded \\\\0 null\""
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p \"abcd\"\[2\]"	" = 99 'c'"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p sizeof (\"abcdef\")"	" = 7"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "ptype \"foo\""		" = char \\\[4\\\]"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p *\"foo\""		" = 102 'f'"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "ptype *\"foo\""		" = char"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p &*\"foo\""		" = \"foo\""
     setup_xfail "*-*-*"
     gdb_test "ptype &*\"foo\""	"type = char \\*"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "p (char *)\"foo\""	" = \"foo\""
 }
 
@@ -653,17 +644,11 @@
     # (Test may involve inferior malloc() calls).
     set timeout 60;
 
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "print {'a','b','c'}"	" = \"abc\""
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test_escape_braces "print {0,1,2}"    " = {0, 1, 2}"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test_escape_braces "print {(long)0,(long)1,(long)2}"  " = {0, 1, 2}"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test_escape_braces "print {{0,1,2},{3,4,5}}"  " = {{0, 1, 2}, {3, 4, 5}}"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "print {4,5,6}\[2\]"	" = 6"
-    # OBSOLETE setup_xfail "a29k-*-udi" 2416
     gdb_test "print *&{4,5,6}\[1\]"	" = 5"
 }
 
Index: gdb.base/ptype.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/ptype.exp,v
retrieving revision 1.4
diff -u -r1.4 ptype.exp
--- gdb.base/ptype.exp	21 Feb 2002 20:34:16 -0000	1.4
+++ gdb.base/ptype.exp	4 May 2002 15:05:00 -0000
@@ -1,5 +1,5 @@
-#   Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999, 2000
-#   Free Software Foundation, Inc.
+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999,
+# 2000, 2002 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -174,7 +174,6 @@
 # merged into whatis.exp, or else maintenance will be a royal pain -kingdon
 #setup_xfail "i960-*-*" 1821
 #setup_xfail "mips-idt-*" "mips-sgi-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
 #send "ptype v_char\n"
 #gdb_expect {
 #    -re "type = char.*$gdb_prompt $"	{ pass "ptype char" }
@@ -184,7 +183,6 @@
 #
 #
 #setup_xfail "mips-*-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
 #send "ptype v_signed_char\n"
 #gdb_expect {
 #    -re "type = signed char.*$gdb_prompt $"	{ pass "ptype signed char" }
@@ -281,7 +279,6 @@
 #
 #setup_xfail "i960-*-*" 1821
 #setup_xfail "mips-idt-*" "mips-sgi-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
 #send "ptype v_char_array\n"
 #gdb_expect {
 #    -re "type = char .2..*$gdb_prompt $"	{ pass "ptype char array" }
@@ -291,7 +288,6 @@
 #
 #
 #setup_xfail "mips-*-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
 #send "ptype v_signed_char_array\n"
 #gdb_expect {
 #    -re "type = (|signed )char .2..*$gdb_prompt $"	{ pass "ptype signed char array" }
@@ -386,7 +382,6 @@
 ##
 #setup_xfail "i960-*-*" 1821
 #setup_xfail "mips-idt-*" "mips-sgi-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
 #send "ptype v_char_pointer\n"
 #gdb_expect {
 #    -re "type = char \*.*$gdb_prompt $"	{ pass "ptype char pointer" }
@@ -396,7 +391,6 @@
 #
 #
 #setup_xfail "mips-*-*"
-# OBSOLETE #setup_xfail "a29k-*-*"
 #send "ptype v_signed_char_pointer\n"
 #gdb_expect {
 #    -re "type = (|signed )char \*.*$gdb_prompt $"
Index: gdb.base/scope.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/scope.exp,v
retrieving revision 1.5
diff -u -r1.5 scope.exp
--- gdb.base/scope.exp	14 Feb 2002 06:25:18 -0000	1.5
+++ gdb.base/scope.exp	4 May 2002 15:05:00 -0000
@@ -1,5 +1,5 @@
-# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
-# Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2002 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -515,7 +515,6 @@
 
     # This test will only fail if the file was compiled by gcc, but
     # there's no way to check that.
-    # OBSOLETE setup_xfail "a29k-*-udi" 2423
     if [gdb_test "cont" "Break.* marker4.*at .*:$decimal.*" \
 	"continue to marker4 in scope.exp"] then { gdb_suppress_tests }
     if [gdb_test "up" ".*localscopes.*" "up from marker4 in scope.exp"] {
Index: gdb.base/whatis.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/whatis.exp,v
retrieving revision 1.3
diff -u -r1.3 whatis.exp
--- gdb.base/whatis.exp	6 Jan 2002 14:42:39 -0000	1.3
+++ gdb.base/whatis.exp	4 May 2002 15:05:01 -0000
@@ -1,5 +1,5 @@
-#   Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999
-#   Free Software Foundation, Inc.
+# Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1999, 2002
+# Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -85,7 +85,6 @@
 } else {
     set signed_char "signed char"
 }
-# OBSOLETE setup_xfail "a29k-*-*"
 if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix*" }
 gdb_test "whatis v_signed_char" \
     "type = $signed_char" \
Index: gdb.c++/cplusfuncs.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.c++/cplusfuncs.exp,v
retrieving revision 1.4
diff -u -r1.4 cplusfuncs.exp
--- gdb.c++/cplusfuncs.exp	6 Jan 2002 14:42:39 -0000	1.4
+++ gdb.c++/cplusfuncs.exp	4 May 2002 15:05:02 -0000
@@ -1,4 +1,4 @@
-# Copyright (C) 1992, 1997, 1999, 2001 Free Software Foundation, Inc.
+# Copyright 1992, 1997, 1999, 2001, 2002 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -319,13 +319,6 @@
     global dm_type_foo_ref
     global dm_type_void
     global dm_type_void_star
-
-    # OBSOLETE # # These tests don't work for COFF targets; don't even try them
-    # OBSOLETE # if [istarget "a29k-*-udi"] then {
-    # OBSOLETE #     setup_xfail "a29k-*-udi"
-    # OBSOLETE #     fail "skipping operator tests"
-    # OBSOLETE #     return
-    # OBSOLETE #  }
 
     # operator* requires quoting so that GDB does not treat it as a regexp.
     info_func "operator\\*("	"void foo::operator*($dm_type_foo_ref);"
Index: gdb.c++/misc.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.c++/misc.exp,v
retrieving revision 1.3
diff -u -r1.3 misc.exp
--- gdb.c++/misc.exp	6 Jan 2002 14:42:39 -0000	1.3
+++ gdb.c++/misc.exp	4 May 2002 15:05:02 -0000
@@ -1,4 +1,5 @@
-# Copyright 1992, 1994, 1995, 1996, 1997, 1999 Free Software Foundation, Inc.
+# Copyright 1992, 1994, 1995, 1996, 1997, 1999, 2002 Free Software
+# Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -41,7 +42,6 @@
 
     # See what language gdb thinks main() is, prior to reading full symbols.
     # I think this fails for COFF targets.
-    # OBSOLETE setup_xfail "a29k-*-udi"
     send_gdb "show language\n"
     gdb_expect {
 	-re ".* source language is \"auto; currently c\[+\]+\".*$gdb_prompt $" {

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]