This is the mail archive of the
gdb-patches@sources.redhat.com
mailing list for the GDB project.
[rfa:doco] Leave TeX tmp files around
- From: Andrew Cagney <ac131313 at ges dot redhat dot com>
- To: gdb-patches at sources dot redhat dot com
- Date: Sat, 24 Aug 2002 22:01:29 -0400
- Subject: [rfa:doco] Leave TeX tmp files around
Hello,
Eli suggested leaving around the TeX work files. The attached does it
but also explains why the are removed before a new TeX run.
ok?
Andrew
2002-08-24 Andrew Cagney <ac131313@redhat.com>
* Makefile.in (clean): Move to end of file.
(distclean, maintainer-clean, realclean): Ditto.
(mostlyclean): Move rule to end of file. Use GDB_TEX_TMPS,
GDBINT_TEX_TMPS, STABS_TEX_TMPS.
(gdb.dvi, gdb.pdf): Do not cleanup TeX temp files after texi2dvi.
(gdbint.dvi, gdbint.pdf, stabs.dvi, stabs.pdf): Ditto.
Index: Makefile.in
===================================================================
RCS file: /cvs/src/src/gdb/doc/Makefile.in,v
retrieving revision 1.21
diff -u -r1.21 Makefile.in
--- Makefile.in 25 Aug 2002 00:12:33 -0000 1.21
+++ Makefile.in 25 Aug 2002 01:56:22 -0000
@@ -201,27 +201,6 @@
-(cd stage3 ; mv -f * ..)
-rmdir stage3
-# The "least clean" level of cleaning. Get rid of files which are
-# automatically generated files that are just intermediate files,
-#
-mostlyclean:
- rm -f gdb.mm gdb.ms gdb.me links2roff
- rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
- rm -f sedref.dvi sedref.tex tmp.sed
-
-clean: mostlyclean
- rm -f gdb-cfg.texi
-
-distclean: clean
- rm -f Makefile config.status
-
-# GDBvn.texi, the dvi files, the info files, and the postscript files,
-# are all part of the distribution, so it should not be removed by
-# "clean" or "distclean". Use maintainer-clean to remove them.
-
-maintainer-clean realclean: distclean
- rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
-
# GDB QUICK REFERENCE (dvi output)
refcard.dvi : refcard.tex $(REFEDITS)
echo > tmp.sed
@@ -264,6 +243,9 @@
# VPATH will often tell make not to bother building it, because the one
# in the srcdir is up to date. (if not, then make should build one here).
+# Clean these up before each run. Avoids a catch 22 with not being
+# able to re-generate these files (to fix a corruption) because these
+# files contain a corruption.
GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
gdb.tp* gdb.vr*
@@ -275,7 +257,6 @@
cp $(srcdir)/GDBvn.texi . ; else true; fi
rm -f $(GDB_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
- rm -f $(GDB_TEX_TMPS)
gdb.ps: gdb.dvi
$(DVIPS) -o $@ $?
@@ -287,7 +268,6 @@
cp $(srcdir)/GDBvn.texi . ; else true; fi
rm -f $(GDB_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
- rm -f $(GDB_TEX_TMPS)
# GDB MANUAL: info file
gdb.info: ${GDB_DOC_FILES}
@@ -369,6 +349,9 @@
gdb_toc.html: ${GDB_DOC_FILES}
$(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
+# Clean these up before each run. Avoids a catch 22 with not being
+# able to re-generate these files (to fix a corruption) because these
+# files contain a corruption.
GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
@@ -376,7 +359,6 @@
gdbint.dvi: $(GDBINT_DOC_FILES)
rm -f $(GDBINT_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
- rm -f $(GDBINT_TEX_TMPS)
gdbint.ps : gdbint.dvi
$(DVIPS) -o $@ $?
@@ -384,7 +366,6 @@
gdbint.pdf: $(GDBINT_DOC_FILES)
rm -f $(GDBINT_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
- rm -f $(GDBINT_TEX_TMPS)
# GDB INTERNALS MANUAL: info file
@@ -404,6 +385,9 @@
stabs_toc.html: $(STABS_DOC_FILES)
$(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
+# Clean these up before each run. Avoids a catch 22 with not being
+# able to re-generate these files (to fix a corruption) because these
+# files contain a corruption.
STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
@@ -411,7 +395,6 @@
stabs.dvi : $(STABS_DOC_FILES)
rm -f $(STABS_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
- rm -f $(STABS_TEX_TMPS)
stabs.ps: stabs.dvi
$(DVIPS) -o $@ $?
@@ -419,9 +402,33 @@
stabs.pdf: $(STABS_DOC_FILES)
rm -f $(STABS_TEX_TMPS)
$(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
- rm -f $(STABS_TEX_TMPS)
force:
Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
$(SHELL) ./config.status
+
+
+# The "least clean" level of cleaning. Get rid of files which are
+# automatically generated files that are just intermediate files,
+
+mostlyclean:
+ rm -f gdb.mm gdb.ms gdb.me links2roff
+ rm -f $(GDB_TEX_TMPS)
+ rm -f $(GDBINT_TEX_TMPS)
+ rm -f $(STABS_TEX_TMPS)
+ rm -f sedref.dvi sedref.tex tmp.sed
+
+clean: mostlyclean
+ rm -f gdb-cfg.texi
+
+distclean: clean
+ rm -f Makefile config.status
+
+# GDBvn.texi, the dvi files, the info files, and the postscript files,
+# are all part of the distribution, so it should not be removed by
+# "clean" or "distclean". Use maintainer-clean to remove them.
+
+maintainer-clean realclean: distclean
+ rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
+