This is the mail archive of the gdb-patches@sources.redhat.com mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [RFA/testsuite] Workaround timeout in default.exp


Darn.  This discussion sounded familiar; it turns out I had a patch
for this written back in 2002 that I guess I never submitted.  Here it
is, adapted for the current sources; default.exp runs on AIX with this
patch.

(Your solution seems simpler.)

Sun Feb  3 19:52:31 2002  Jim Blandy  <jimb@seadog.cygnus.com>

	* gdb.base/default.exp: Distinguish the GDB prompt as it appears
	in "info set" and "show" output from the true prompt.

Index: gdb/testsuite/gdb.base/default.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/default.exp,v
retrieving revision 1.17
diff -c -p -r1.17 default.exp
*** gdb/testsuite/gdb.base/default.exp	20 Mar 2003 14:45:50 -0000	1.17
--- gdb/testsuite/gdb.base/default.exp	21 May 2004 06:48:57 -0000
*************** gdb_test "info s" "No stack." "info stac
*** 335,343 ****
  gdb_test "info stack" "No stack." "info stack"
  #test info set
  # FIXME -- needs to match the entire output
! # FIXME -- on native solaris 2.8, this test fails due to this line:
! #  prompt:  Gdb's prompt is "(gdb) ".^M
! gdb_test "info set" "confirm:  Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename:  The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize:  Number of source lines gdb will list by default is 10.*" "info set"
  gdb_test "info symbol" "Argument required .address.."
  #test info source
  gdb_test  "info source" "No current source file..*" "info source"
--- 335,373 ----
  gdb_test "info stack" "No stack." "info stack"
  #test info set
  # FIXME -- needs to match the entire output
! send_gdb "info set\n"
! set seen_confirm 0
! set seen_history 0
! set seen_prompt 0
! set seen_listsize 0
! gdb_expect {
!     -re ".*confirm:  Whether to confirm potentially dangerous operations is" {
! 	set seen_confirm 1
! 	exp_continue
!     }
!     -re ".*history filename:  The filename in which to record the command history is" {
! 	set seen_history 1
! 	exp_continue
!     }
!     -re ".*listsize:  Number of source lines gdb will list by default is 10" {
! 	set seen_listsize 1
! 	exp_continue
!     }
!     -re ".*prompt:  Gdb's prompt is \"${gdb_prompt}" {
! 	set seen_prompt 1
! 	exp_continue
!     }
!     -re ".*\[\r\n\]+${gdb_prompt} $" {
!     }
!     timeout {
! 	fail "info set (timeout)"
!     }
! }
! if {$seen_confirm && $seen_history && $seen_prompt && $seen_listsize} {
!     pass "info set"
! } else {
!     fail "info set"
! }
  gdb_test "info symbol" "Argument required .address.."
  #test info source
  gdb_test  "info source" "No current source file..*" "info source"
*************** gdb_test "show width" "Number of charact
*** 674,680 ****
  # This is only supported on targets which use exec.o.
  gdb_test "show write" "Writing into executable and core files is o.*" "show write"
  #test show
! gdb_test "show" "confirm:  *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename:  *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save:  *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size:  *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize:  *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements:  *Limit on string chars or array elements to print is 200..*" "show"
  #test stepi "si" abbreviation
  gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
  #test stepi
--- 704,758 ----
  # This is only supported on targets which use exec.o.
  gdb_test "show write" "Writing into executable and core files is o.*" "show write"
  #test show
! send_gdb "show\n"
! set seen_confirm 0
! set seen_history_filename 0
! set seen_history_save 0
! set seen_history_size 0
! set seen_listsize 0
! set seen_print_elements 0
! set seen_prompt 0
! gdb_expect {
!     -re ".*confirm:  *Whether to confirm potentially dangerous operations is" {
! 	set seen_confirm 1
! 	exp_continue
!     }
!     -re ".*history filename:  *The filename in which to record the command" {
! 	set seen_history_filename 1
! 	exp_continue
!     }
!     -re ".*history save:  *Saving of the history record on exit is" {
! 	set seen_history_save 1
! 	exp_continue
!     }
!     -re ".*history size:  *The size of the command history is" {
! 	set seen_history_size 1
! 	exp_continue
!     }
!     -re ".*listsize:  *Number of source lines gdb will list by default is" {
! 	set seen_listsize 1
! 	exp_continue
!     }
!     -re ".*print elements:  *Limit on string chars or array elements to" {
! 	set seen_print_elements 1
! 	exp_continue
!     }
!     -re "prompt:  Gdb's prompt is \"${gdb_prompt}" {
! 	set seen_prompt 1
! 	exp_continue
!     }
!     -re ".*\[\r\n\]+${gdb_prompt} $" {
!     }
!     timeout {
! 	fail "show (timeout)"
!     }
! }
! if {$seen_confirm && $seen_history_filename && $seen_history_save && $seen_history_size && $seen_listsize && $seen_print_elements && $seen_prompt} {
!     pass "show"
! } else {
!     fail "show"
! }
! 
  #test stepi "si" abbreviation
  gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
  #test stepi



Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]