This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [rfa] Followup for obsolete targets
- From: "Mark Kettenis" <mark dot kettenis at xs4all dot nl>
- To: gdb-patches at sourceware dot org, "Eli Zaretskii" <eliz at gnu dot org>, "Mark Kettenis" <kettenis at gnu dot org>
- Date: Fri, 30 Mar 2007 10:08:27 +0200 (CEST)
- Subject: Re: [rfa] Followup for obsolete targets
- References: <20070329203657.GC19477@caradoc.them.org>
> This patch removes some bits and pieces associated with the targets I
> just removed - support code and documentation. Is this OK?
>
> Eli, I think that some of the other sections on target-specific
> commands are for targets that were removed some time ago. Just
> for your information - I didn't double-check.
>
> This was a lot of work. I'm going to hold off on the other obsoleted
> files for the moment, but I'll definitely keep going eventually - I
> especially want to remove the obsolete symbol readers.
Looks fine to me.
> --
> Daniel Jacobowitz
> CodeSourcery
>
> 2007-03-29 Daniel Jacobowitz <dan@codesourcery.com>
>
> * Makefile.in (SFILES): Remove nlmread.c.
> (COMMON_OBS): Remove nlmread.o.
> (nlmread.o): Delete rule.
> * README: Delete reference to remote-st.c.
> * acinclude.m4 (CY_AC_TCL_LYNX_POSIX): Delete.
> * defs.h (enum gdb_osabi): Delete GDB_OSABI_NETWARE and
> GDB_OSABI_LYNXOS.
> * i386-tdep.c (i386_nw_init_abi, i386_nlm_osabi_sniffer): Delete.
> (_initialize_i386_tdep): Do not reference them.
> * nlmread.c: Delete file.
> * osabi.c (gdb_osabi_names): Remove NetWare and LynxOS.
> * target.c: Doc update.
> * thread.c: Delete commented include.
> * config/alpha/tm-alpha.h: Doc update.
>
> * gdb.texinfo (Startup): Delete references to some alternate
> names for .gdbinit.
> (Thread): Remove LynxOS reference.
> (Tandem ST2000): Delete target-specific documentation.
> * gdbint.texinfo (Symbol Handling): Remove mention of NLM.
> (Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
> and GDB_OSABI_LYNXOS.
>
> * config/netware.exp: Delete file.
>
> Index: Makefile.in
> ===================================================================
> RCS file: /cvs/src/src/gdb/Makefile.in,v
> retrieving revision 1.886
> diff -u -p -r1.886 Makefile.in
> --- Makefile.in 29 Mar 2007 19:58:27 -0000 1.886
> +++ Makefile.in 29 Mar 2007 20:25:54 -0000
> @@ -548,7 +548,6 @@ SFILES = ada-exp.y ada-lang.c ada-typepr
> m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
> macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
> mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
> - nlmread.c \
> objc-exp.y objc-lang.c \
> objfiles.c osabi.c observer.c \
> p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
> @@ -969,7 +968,7 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $
> complaints.o typeprint.o \
> ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
> ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
> - nlmread.o serial.o mdebugread.o top.o utils.o \
> + serial.o mdebugread.o top.o utils.o \
> ui-file.o \
> user-regs.o \
> frame.o frame-unwind.o doublest.o \
> @@ -2424,8 +2423,6 @@ ms1-tdep.o: ms1-tdep.c $(defs_h) $(frame
> $(gdb_assert_h)
> nbsd-nat.o: nbsd-nat.c $(defs_h) $(nbsd_nat_h)
> nbsd-tdep.o: nbsd-tdep.c $(defs_h) $(gdb_string_h) $(solib_svr4_h)
> -nlmread.o: nlmread.c $(defs_h) $(bfd_h) $(symtab_h) $(symfile_h) \
> - $(objfiles_h) $(buildsym_h) $(stabsread_h) $(block_h)
> nto-procfs.o: nto-procfs.c $(defs_h) $(gdb_dirent_h) $(exceptions_h) \
> $(gdb_string_h) $(gdbcore_h) $(inferior_h) $(target_h) $(objfiles_h) \
> $(gdbthread_h) $(nto_tdep_h) $(command_h) $(regcache_h) $(solib_h)
> Index: README
> ===================================================================
> RCS file: /cvs/src/src/gdb/README,v
> retrieving revision 1.38
> diff -u -p -r1.38 README
> --- README 21 Nov 2006 05:12:44 -0000 1.38
> +++ README 29 Mar 2007 20:25:55 -0000
> @@ -461,7 +461,6 @@ monitors and other hardware:
> remote-mips.c MIPS remote debugging protocol
> remote-sds.c PowerPC SDS monitor
> remote-sim.c Generalized simulator protocol
> - remote-st.c Tandem ST-2000 monitor
>
>
> Reporting Bugs in GDB
> Index: acinclude.m4
> ===================================================================
> RCS file: /cvs/src/src/gdb/acinclude.m4,v
> retrieving revision 1.16
> diff -u -p -r1.16 acinclude.m4
> --- acinclude.m4 8 Aug 2006 20:26:23 -0000 1.16
> +++ acinclude.m4 29 Mar 2007 20:25:55 -0000
> @@ -17,42 +17,6 @@ sinclude(../config/lib-ld.m4)
> sinclude(../config/lib-prefix.m4)
> sinclude(../config/lib-link.m4)
>
> -dnl CYGNUS LOCAL: This gets the right posix flag for gcc
> -AC_DEFUN([CY_AC_TCL_LYNX_POSIX],
> -[AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AC_PROG_CPP])
> -AC_MSG_CHECKING([if running LynxOS])
> -AC_CACHE_VAL(ac_cv_os_lynx,
> -[AC_EGREP_CPP(yes,
> -[/*
> - * The old Lynx "cc" only defines "Lynx", but the newer one uses
> "__Lynx__"
> - */
> -#if defined(__Lynx__) || defined(Lynx)
> -yes
> -#endif
> -], ac_cv_os_lynx=yes, ac_cv_os_lynx=no)])
> -#
> -if test "$ac_cv_os_lynx" = "yes" ; then
> - AC_MSG_RESULT(yes)
> - AC_DEFINE(LYNX)
> - AC_MSG_CHECKING([whether -mposix or -X is available])
> - AC_CACHE_VAL(ac_cv_c_posix_flag,
> - [AC_TRY_COMPILE(,[
> - /*
> - * This flag varies depending on how old the compiler is.
> - * -X is for the old "cc" and "gcc" (based on 1.42).
> - * -mposix is for the new gcc (at least 2.5.8).
> - */
> - #if defined(__GNUC__) && __GNUC__ >= 2
> - choke me
> - #endif
> - ], ac_cv_c_posix_flag=" -mposix", ac_cv_c_posix_flag=" -X")])
> - CC="$CC $ac_cv_c_posix_flag"
> - AC_MSG_RESULT($ac_cv_c_posix_flag)
> - else
> - AC_MSG_RESULT(no)
> -fi
> -])
> -
> #
> # Sometimes the native compiler is a bogus stub for gcc or /usr/ucb/cc.
> This
> # makes configure think it's cross compiling. If --target wasn't used,
> then
> Index: defs.h
> ===================================================================
> RCS file: /cvs/src/src/gdb/defs.h,v
> retrieving revision 1.203
> diff -u -p -r1.203 defs.h
> --- defs.h 29 Mar 2007 18:55:01 -0000 1.203
> +++ defs.h 29 Mar 2007 20:25:55 -0000
> @@ -979,9 +979,7 @@ enum gdb_osabi
> GDB_OSABI_OPENBSD_ELF,
> GDB_OSABI_WINCE,
> GDB_OSABI_GO32,
> - GDB_OSABI_NETWARE,
> GDB_OSABI_IRIX,
> - GDB_OSABI_LYNXOS,
> GDB_OSABI_INTERIX,
> GDB_OSABI_HPUX_ELF,
> GDB_OSABI_HPUX_SOM,
> Index: i386-tdep.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/i386-tdep.c,v
> retrieving revision 1.232
> diff -u -p -r1.232 i386-tdep.c
> --- i386-tdep.c 27 Feb 2007 20:17:19 -0000 1.232
> +++ i386-tdep.c 29 Mar 2007 20:25:55 -0000
> @@ -2195,16 +2195,6 @@ i386_go32_init_abi (struct gdbarch_info
>
> tdep->jb_pc_offset = 36;
> }
> -
> -/* NetWare. */
> -
> -static void
> -i386_nw_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
> -{
> - struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
> -
> - tdep->jb_pc_offset = 24;
> -}
>
>
> /* i386 register groups. In addition to the normal groups, add "mmx"
> @@ -2469,12 +2459,6 @@ i386_coff_osabi_sniffer (bfd *abfd)
>
> return GDB_OSABI_UNKNOWN;
> }
> -
> -static enum gdb_osabi
> -i386_nlm_osabi_sniffer (bfd *abfd)
> -{
> - return GDB_OSABI_NETWARE;
> -}
>
>
> /* Provide a prototype to silence -Wmissing-prototypes. */
> @@ -2509,15 +2493,11 @@ is \"default\"."),
>
> gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_coff_flavour,
> i386_coff_osabi_sniffer);
> - gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_nlm_flavour,
> - i386_nlm_osabi_sniffer);
>
> gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_SVR4,
> i386_svr4_init_abi);
> gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_GO32,
> i386_go32_init_abi);
> - gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_NETWARE,
> - i386_nw_init_abi);
>
> /* Initialize the i386-specific register groups & types. */
> i386_init_reggroups ();
> Index: nlmread.c
> ===================================================================
> RCS file: nlmread.c
> diff -N nlmread.c
> --- nlmread.c 9 Jan 2007 17:58:55 -0000 1.18
> +++ /dev/null 1 Jan 1970 00:00:00 -0000
> @@ -1,237 +0,0 @@
> -/* Read NLM (NetWare Loadable Module) format executable files for GDB.
> - Copyright (C) 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2007
> - Free Software Foundation, Inc.
> - Written by Fred Fish at Cygnus Support (fnf@cygnus.com).
> -
> - This file is part of GDB.
> -
> - This program is free software; you can redistribute it and/or modify
> - it under the terms of the GNU General Public License as published by
> - the Free Software Foundation; either version 2 of the License, or
> - (at your option) any later version.
> -
> - This program is distributed in the hope that it will be useful,
> - but WITHOUT ANY WARRANTY; without even the implied warranty of
> - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - GNU General Public License for more details.
> -
> - You should have received a copy of the GNU General Public License
> - along with this program; if not, write to the Free Software
> - Foundation, Inc., 51 Franklin Street, Fifth Floor,
> - Boston, MA 02110-1301, USA. */
> -
> -#include "defs.h"
> -#include "bfd.h"
> -#include "symtab.h"
> -#include "symfile.h"
> -#include "objfiles.h"
> -#include "buildsym.h"
> -#include "stabsread.h"
> -#include "block.h"
> -
> -extern void _initialize_nlmread (void);
> -
> -static void nlm_new_init (struct objfile *);
> -
> -static void nlm_symfile_init (struct objfile *);
> -
> -static void nlm_symfile_read (struct objfile *, int);
> -
> -static void nlm_symfile_finish (struct objfile *);
> -
> -static void nlm_symtab_read (bfd *, CORE_ADDR, struct objfile *);
> -
> -/* Initialize anything that needs initializing when a completely new
> symbol
> - file is specified (not just adding some symbols from another file,
> e.g. a
> - shared library).
> -
> - We reinitialize buildsym, since gdb will be able to read stabs from an
> NLM
> - file at some point in the near future. */
> -
> -static void
> -nlm_new_init (struct objfile *ignore)
> -{
> - stabsread_new_init ();
> - buildsym_new_init ();
> -}
> -
> -
> -/* NLM specific initialization routine for reading symbols.
> -
> - It is passed a pointer to a struct sym_fns which contains, among other
> - things, the BFD for the file whose symbols are being read, and a slot
> for
> - a pointer to "private data" which we can fill with goodies.
> -
> - For now at least, we have nothing in particular to do, so this
> function is
> - just a stub. */
> -
> -static void
> -nlm_symfile_init (struct objfile *ignore)
> -{
> -}
> -
> -/*
> -
> - LOCAL FUNCTION
> -
> - nlm_symtab_read -- read the symbol table of an NLM file
> -
> - SYNOPSIS
> -
> - void nlm_symtab_read (bfd *abfd, CORE_ADDR addr,
> - struct objfile *objfile)
> -
> - DESCRIPTION
> -
> - Given an open bfd, a base address to relocate symbols to, and a
> - flag that specifies whether or not this bfd is for an executable
> - or not (may be shared library for example), add all the global
> - function and data symbols to the minimal symbol table.
> - */
> -
> -static void
> -nlm_symtab_read (bfd *abfd, CORE_ADDR addr, struct objfile *objfile)
> -{
> - long storage_needed;
> - asymbol *sym;
> - asymbol **symbol_table;
> - long number_of_symbols;
> - long i;
> - struct cleanup *back_to;
> - CORE_ADDR symaddr;
> - enum minimal_symbol_type ms_type;
> -
> - storage_needed = bfd_get_symtab_upper_bound (abfd);
> - if (storage_needed < 0)
> - error (_("Can't read symbols from %s: %s"), bfd_get_filename (abfd),
> - bfd_errmsg (bfd_get_error ()));
> - if (storage_needed > 0)
> - {
> - symbol_table = (asymbol **) xmalloc (storage_needed);
> - back_to = make_cleanup (xfree, symbol_table);
> - number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
> - if (number_of_symbols < 0)
> - error (_("Can't read symbols from %s: %s"), bfd_get_filename (abfd),
> - bfd_errmsg (bfd_get_error ()));
> -
> - for (i = 0; i < number_of_symbols; i++)
> - {
> - sym = symbol_table[i];
> - if ( /*sym -> flags & BSF_GLOBAL */ 1)
> - {
> - /* Bfd symbols are section relative. */
> - symaddr = sym->value + sym->section->vma;
> - /* Relocate all non-absolute symbols by base address. */
> - if (sym->section != &bfd_abs_section)
> - symaddr += addr;
> -
> - /* For non-absolute symbols, use the type of the section
> - they are relative to, to intuit text/data. BFD provides
> - no way of figuring this out for absolute symbols. */
> - if (sym->section->flags & SEC_CODE)
> - ms_type = mst_text;
> - else if (sym->section->flags & SEC_DATA)
> - ms_type = mst_data;
> - else
> - ms_type = mst_unknown;
> -
> - prim_record_minimal_symbol (sym->name, symaddr, ms_type,
> - objfile);
> - }
> - }
> - do_cleanups (back_to);
> - }
> -}
> -
> -
> -/* Scan and build partial symbols for a symbol file.
> - We have been initialized by a call to nlm_symfile_init, which
> - currently does nothing.
> -
> - SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
> - in each section. We simplify it down to a single offset for all
> - symbols. FIXME.
> -
> - MAINLINE is true if we are reading the main symbol
> - table (as opposed to a shared lib or dynamically loaded file).
> -
> - This function only does the minimum work necessary for letting the
> - user "name" things symbolically; it does not read the entire symtab.
> - Instead, it reads the external and static symbols and puts them in
> partial
> - symbol tables. When more extensive information is requested of a
> - file, the corresponding partial symbol table is mutated into a full
> - fledged symbol table by going back and reading the symbols
> - for real.
> -
> - Note that NLM files have two sets of information that is potentially
> - useful for building gdb's minimal symbol table. The first is a list
> - of the publically exported symbols, and is currently used to build
> - bfd's canonical symbol table. The second is an optional native
> debugging
> - format which contains additional symbols (and possibly duplicates of
> - the publically exported symbols). The optional native debugging
> format
> - is not currently used. */
> -
> -static void
> -nlm_symfile_read (struct objfile *objfile, int mainline)
> -{
> - bfd *abfd = objfile->obfd;
> - struct cleanup *back_to;
> - CORE_ADDR offset;
> -
> - init_minimal_symbol_collection ();
> - back_to = make_cleanup_discard_minimal_symbols ();
> -
> - /* FIXME, should take a section_offsets param, not just an offset. */
> -
> - offset = ANOFFSET (objfile->section_offsets, 0);
> -
> - /* Process the NLM export records, which become the bfd's canonical
> symbol
> - table. */
> -
> - nlm_symtab_read (abfd, offset, objfile);
> -
> - /* Install any minimal symbols that have been collected as the current
> - minimal symbols for this objfile. */
> -
> - install_minimal_symbols (objfile);
> - do_cleanups (back_to);
> -
> - stabsect_build_psymtabs (objfile, mainline, ".stab",
> - ".stabstr", ".text");
> - /* FIXME: We could locate and read the optional native debugging
> format
> - here and add the symbols to the minimal symbol table. */
> -}
> -
> -
> -/* Perform any local cleanups required when we are done with a particular
> - objfile. I.E, we are in the process of discarding all symbol
> information
> - for an objfile, freeing up all memory held for it, and unlinking the
> - objfile struct from the global list of known objfiles. */
> -
> -static void
> -nlm_symfile_finish (struct objfile *objfile)
> -{
> - if (objfile->deprecated_sym_private != NULL)
> - {
> - xfree (objfile->deprecated_sym_private);
> - }
> -}
> -
> -/* Register that we are able to handle NLM file format. */
> -
> -static struct sym_fns nlm_sym_fns =
> -{
> - bfd_target_nlm_flavour,
> - nlm_new_init, /* sym_new_init: init anything gbl to entire symtab */
> - nlm_symfile_init, /* sym_init: read initial info, setup for sym_read()
> */
> - nlm_symfile_read, /* sym_read: read a symbol file into symtab */
> - nlm_symfile_finish, /* sym_finish: finished with file, cleanup */
> - default_symfile_offsets, /* sym_offsets: Translate ext. to int.
> relocation */
> - NULL /* next: pointer to next struct sym_fns */
> -};
> -
> -void
> -_initialize_nlmread (void)
> -{
> - add_symtab_fns (&nlm_sym_fns);
> -}
> Index: osabi.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/osabi.c,v
> retrieving revision 1.39
> diff -u -p -r1.39 osabi.c
> --- osabi.c 9 Jan 2007 17:58:55 -0000 1.39
> +++ osabi.c 29 Mar 2007 20:25:56 -0000
> @@ -64,9 +64,7 @@ static const char * const gdb_osabi_name
> "OpenBSD ELF",
> "Windows CE",
> "DJGPP",
> - "NetWare",
> "Irix",
> - "LynxOS",
> "Interix",
> "HP/UX ELF",
> "HP/UX SOM",
> Index: target.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/target.c,v
> retrieving revision 1.136
> diff -u -p -r1.136 target.c
> --- target.c 28 Mar 2007 18:56:07 -0000 1.136
> +++ target.c 29 Mar 2007 20:25:56 -0000
> @@ -1970,7 +1970,7 @@ generic_mourn_inferior (void)
> deprecated_detach_hook ();
> }
>
> -/* Helper function for child_wait and the Lynx derivatives of child_wait.
> +/* Helper function for child_wait and the derivatives of child_wait.
> HOSTSTATUS is the waitstatus from wait() or the equivalent; store our
> translation of that in OURSTATUS. */
> void
> Index: thread.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/thread.c,v
> retrieving revision 1.51
> diff -u -p -r1.51 thread.c
> --- thread.c 28 Feb 2007 17:35:01 -0000 1.51
> +++ thread.c 29 Mar 2007 20:25:56 -0000
> @@ -42,8 +42,6 @@
> #include <signal.h>
> #include "ui-out.h"
>
> -/*#include "lynxos-core.h" */
> -
> /* Definition of struct thread_info exported to gdbthread.h */
>
> /* Prototypes for exported functions. */
> Index: config/alpha/tm-alpha.h
> ===================================================================
> RCS file: /cvs/src/src/gdb/config/alpha/tm-alpha.h,v
> retrieving revision 1.35
> diff -u -p -r1.35 tm-alpha.h
> --- config/alpha/tm-alpha.h 9 Jan 2007 17:59:03 -0000 1.35
> +++ config/alpha/tm-alpha.h 29 Mar 2007 20:25:56 -0000
> @@ -1,5 +1,5 @@
> /* Definitions to make GDB run on an Alpha box under OSF1. This is
> - also used by the Alpha/Netware and Alpha GNU/Linux targets.
> + also used by the Alpha GNU/Linux target.
>
> Copyright 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2002, 2004, 2007
> Free Software Foundation, Inc.
> Index: doc/gdb.texinfo
> ===================================================================
> RCS file: /cvs/src/src/gdb/doc/gdb.texinfo,v
> retrieving revision 1.395
> diff -u -p -r1.395 gdb.texinfo
> --- doc/gdb.texinfo 26 Mar 2007 21:28:20 -0000 1.395
> +++ doc/gdb.texinfo 29 Mar 2007 20:26:00 -0000
> @@ -1241,37 +1241,12 @@ option (@pxref{Mode Options, ,Choosing m
> @cindex init file name
> @cindex @file{.gdbinit}
> The @value{GDBN} init files are normally called @file{.gdbinit}.
> -On some configurations of @value{GDBN}, the init file is known by a
> -different name (these are typically environments where a specialized
> -form of @value{GDBN} may need to coexist with other forms, hence a
> -different name for the specialized version's init file). These are the
> -environments with special init file names:
> -
> -@itemize @bullet
> -@cindex @file{gdb.ini}
> -@item
> The DJGPP port of @value{GDBN} uses the name @file{gdb.ini}, due to
> the limitations of file names imposed by DOS filesystems. The Windows
> ports of @value{GDBN} use the standard name, but if they find a
> @file{gdb.ini} file, they warn you about that and suggest to rename
> the file to the standard name.
>
> -@cindex @file{.vxgdbinit}
> -@item
> -VxWorks (Wind River Systems real-time OS): @file{.vxgdbinit}
> -
> -@cindex @file{.os68gdbinit}
> -@item
> -OS68K (Enea Data Systems real-time OS): @file{.os68gdbinit}
> -
> -@cindex @file{.esgdbinit}
> -@item
> -ES-1800 (Ericsson Telecom AB M68000 emulator): @file{.esgdbinit}
> -
> -@item
> -CISCO 68k: @file{.cisco-gdbinit}
> -@end itemize
> -
>
> @node Quitting GDB
> @section Quitting @value{GDBN}
> @@ -2296,10 +2271,10 @@ Whenever @value{GDBN} detects a new thre
> the target system's identification for the thread with a message in the
> form @samp{[New @var{systag}]}. @var{systag} is a thread identifier
> whose form varies depending on the particular system. For example, on
> -LynxOS, you might see
> +@sc{gnu}/Linux, you might see
>
> @smallexample
> -[New process 35 thread 27]
> +[New Thread 46912507313328 (LWP 25582)]
> @end smallexample
>
> @noindent
> @@ -14294,7 +14269,6 @@ acceptable commands.
> * SH:: Renesas SH
> * Sparclet:: Tsqware Sparclet
> * Sparclite:: Fujitsu Sparclite
> -* ST2000:: Tandem ST2000
> * Z8000:: Zilog Z8000
> * AVR:: Atmel AVR
> * CRIS:: CRIS
> @@ -15324,55 +15298,6 @@ remote protocol.
>
> @end table
>
> -@node ST2000
> -@subsection Tandem ST2000
> -
> -@value{GDBN} may be used with a Tandem ST2000 phone switch, running
> Tandem's
> -STDBUG protocol.
> -
> -To connect your ST2000 to the host system, see the manufacturer's
> -manual. Once the ST2000 is physically attached, you can run:
> -
> -@smallexample
> -target st2000 @var{dev} @var{speed}
> -@end smallexample
> -
> -@noindent
> -to establish it as your debugging environment. @var{dev} is normally
> -the name of a serial device, such as @file{/dev/ttya}, connected to the
> -ST2000 via a serial line. You can instead specify @var{dev} as a TCP
> -connection (for example, to a serial line attached via a terminal
> -concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}.
> -
> -The @code{load} and @code{attach} commands are @emph{not} defined for
> -this target; you must load your program into the ST2000 as you normally
> -would for standalone operation. @value{GDBN} reads debugging information
> -(such as symbols) from a separate, debugging version of the program
> -available on your host computer.
> -@c FIXME!! This is terribly vague; what little content is here is
> -@c basically hearsay.
> -
> -@cindex ST2000 auxiliary commands
> -These auxiliary @value{GDBN} commands are available to help you with the
> ST2000
> -environment:
> -
> -@table @code
> -@item st2000 @var{command}
> -@kindex st2000 @var{cmd}
> -@cindex STDBUG commands (ST2000)
> -@cindex commands to STDBUG (ST2000)
> -Send a @var{command} to the STDBUG monitor. See the manufacturer's
> -manual for available commands.
> -
> -@item connect
> -@cindex connect (to STDBUG)
> -Connect the controlling terminal to the STDBUG command monitor. When
> -you are done interacting with STDBUG, typing either of two character
> -sequences gets you back to the @value{GDBN} command prompt:
> -@kbd{@key{RET} ~ .} (Return, followed by tilde and period) or
> -@kbd{@key{RET} ~ Ctrl-d} (Return, followed by tilde and control-D).
> -@end table
> -
> @node Z8000
> @subsection Zilog Z8000
>
> Index: doc/gdbint.texinfo
> ===================================================================
> RCS file: /cvs/src/src/gdb/doc/gdbint.texinfo,v
> retrieving revision 1.254
> diff -u -p -r1.254 gdbint.texinfo
> --- doc/gdbint.texinfo 27 Mar 2007 19:11:11 -0000 1.254
> +++ doc/gdbint.texinfo 29 Mar 2007 20:26:01 -0000
> @@ -2114,12 +2114,6 @@ SOM, which is a cross-language ABI).
>
> The SOM reader is in @file{hpread.c}.
>
> -@subsection Other File Formats
> -
> -@cindex Netware Loadable Module format
> -Other file formats that have been supported by @value{GDBN} include
> Netware
> -Loadable Modules (@file{nlmread.c}).
> -
> @section Debugging File Formats
>
> This section describes characteristics of debugging information that
> @@ -2677,18 +2671,10 @@ Windows CE.
> @item GDB_OSABI_GO32
> DJGPP.
>
> -@findex GDB_OSABI_NETWARE
> -@item GDB_OSABI_NETWARE
> -Novell NetWare.
> -
> @findex GDB_OSABI_IRIX
> @item GDB_OSABI_IRIX
> Irix.
>
> -@findex GDB_OSABI_LYNXOS
> -@item GDB_OSABI_LYNXOS
> -LynxOS.
> -
> @findex GDB_OSABI_INTERIX
> @item GDB_OSABI_INTERIX
> Interix (Posix layer for MS-Windows systems).
> Index: testsuite/config/netware.exp
> ===================================================================
> RCS file: testsuite/config/netware.exp
> diff -N testsuite/config/netware.exp
> --- testsuite/config/netware.exp 9 Jan 2007 17:59:08 -0000 1.2
> +++ /dev/null 1 Jan 1970 00:00:00 -0000
> @@ -1,219 +0,0 @@
> -# Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 2007
> -# Free Software Foundation, Inc.
> -
> -# This program is free software; you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 2 of the License, or
> -# (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
> USA.
> -
> -# Please email any bugs, comments, and/or additions to this file to:
> -# bug-gdb@prep.ai.mit.edu
> -
> -# This file was written by J.T. Conklin. (jtc@cygnus.com)
> -
> -load_lib gdb.exp
> -load_lib remote.exp
> -
> -global shell_id
> -
> -global LD
> -if ![info exists LD] then {
> - set LD [findfile "$base_dir/../../ld/ld.new"]
> -}
> -
> -global NLMCONV
> -if ![info exists NLMCONV] then {
> - set NLMCONV [findfile "$base_dir/../../binutils/nlmconv"]
> -}
> -
> -#
> -# gdb_version -- extract and print the version number of gcc
> -#
> -proc gdb_version {} {
> - default_gdb_version
> -}
> -
> -#
> -# gdb_unload -- unload a file if one is loaded
> -#
> -
> -#
> -# gdb_load -- load a file into the debugger.
> -# return a -1 if anything goes wrong.
> -#
> -proc gdb_load { arg } {
> - global gdb_prompt
> - global LD
> - global NLMCONV
> - global errorCode
> - global shell_id
> -
> - # FIXME: this is wrong.
> - set targetname [target_info name];
> -
> - set obj [file tail $arg]
> - set nlm "$obj.nlm"
> - set lnk "$obj.lnk"
> -
> - # build *.lnk file
> - set fd [open $lnk w]
> - puts $fd "description \"[file tail $nlm]\""
> - puts $fd "screenname \"System Console\""
> - puts $fd "module clib.nlm"
> - puts $fd "module mathlib.nlm"
> - puts $fd "stack 32768"
> -# puts $fd "stack 64512"
> - puts $fd "debug"
> - # FIXME: don't hardcode location of prelude.o
> - puts $fd "input /s1/cygnus/dejagnu/i386-netware/lib/prelude.o"
> - puts $fd "input $arg"
> - puts $fd "output $nlm"
> - close $fd
> -
> - # run nlmconv
> - verbose "Executing: $NLMCONV -l$LD -T$lnk" 1
> - catch "exec $NLMCONV -l$LD -T$lnk" output
> - if ![string match "" $output] then {
> - verbose $output 1
> - }
> - if ![string match "NONE" $errorCode] {
> - warning "Can't link $arg"
> -
> - return -1
> - }
> - catch "exec rm -f $lnk"
> -
> - # download
> - verbose "Downloading $nlm" 1
> - catch "exec cp $nlm /.NetWare/$targetname.nws/sys.nwv/tmp/x.nlm"
> output
> - if ![string match "" $output] then {
> - verbose $output 1
> - return -1
> - }
> -
> - gdb_file_cmd $nlm
> -}
> -
> -proc gdb_run_cmd { } {
> - global shell_id
> - global gdb_prompt
> - global timeout
> -
> - set connhost [target_info name];
> - if [board_info $connhost exists serial] {
> - set serialport [board_info $connhost serial];
> - } else {
> - set serialport [board_info $connhost netport];
> - }
> -
> - if [board_info $connhost exists baud] {
> - set baud [board_info $connhost baud];
> - } else {
> - set baud 9600;
> - }
> - # FIXME: This is wrong.
> - send "kill\n"
> - gdb_expect {
> - -re ".*Kill the program being debugged.*y or n. $" {
> - send "y\n"
> - exp_continue
> - }
> - -re ".*$gdb_prompt $" {}
> - }
> -
> - verbose "Starting GDB stub on [target_info name]" 1
> - send -i $shell_id "load nlmstub BAUD=$baud x.nlm\r\n"
> -
> - send "set remotebaud $baud\n"
> - gdb_expect {
> - -re "$gdb_prompt" {}
> - timeout {
> - perror "Couldn't set remote baud rate"
> - return
> - }
> - }
> -
> - set otimeout $timeout
> - set timeout 60
> - verbose "Timeout is now $timeout seconds" 2
> - send "target remote $serialport\n"
> - gdb_expect {
> - -re "Couldn't establish connection to remote target" {
> - send "target remote $serialport\n"
> - exp_continue
> - }
> - -re "$gdb_prompt" {}
> - timeout {
> - set timeout $otimeout
> - verbose "Timeout restored to $timeout seconds" 2
> - perror "Couldn't set remote target"
> - return
> - }
> - }
> - set timeout $otimeout
> - verbose "Timeout restored to $timeout seconds" 2
> -
> - send "continue\n"
> - gdb_expect {
> - "Continuing.$" {}
> - }
> -
> - return
> -}
> -
> -
> -
> -#
> -# start the remote shell
> -#
> -
> -set shell_prompt "Password:"
> -set shell_id [remote_open target]
> -
> -if $shell_id<0 then {
> - warning "Couldn't connect to target"
> - return -1
> -}
> -
> -if [string match "" $passwd] then {
> - stty -echo
> - send_user "Password: "
> - expect_user -re "(.*)\n"
> - send_user "\n"
> - set passwd "$expect_out(1,string)"
> - stty echo
> -}
> -
> -send -i $shell_id "$passwd\n"
> -gdb_expect {
> - -i $shell_id ":" {
> - verbose "Got termtype prompt" 0
> - }
> -
> - -i $shell_id timeout {
> - warning "Connection timed out"
> - return -1
> - }
> -}
> -
> -
> -# FIXME: this is wrong.
> -set shell_prompt "[string toupper [target_info name]]:"
> -send -i $shell_id "1\n"
> -
> -gdb_expect {
> - -i $shell_id -re "$shell_prompt" {}
> - -i $shell_id timeout {
> - warning "Connection timed out"
> - return -1
> - }
> -}
>