This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[rfc target-side break conditions 1/5 v2] Documentation bits


This is the second iteration of the documentation bits.

I've switched to using explicit markers for the breakpoint parameters in the Z packet. Conditions will be passed via the "conditions" marker, like the following:

Z0,addr,kind,length,conditions=<cond1>;<cond2>;...;<condn>

The documentation was updated to reflect that.

Luis




2012-01-26  Luis Machado  <lgustavo@codesourcery.com>

	* NEWS: Mention target-side conditional breakpoint support,
	new condition-evaluation breakpoint subcommand and remote
	packet extensions.

	* doc/gdb.texinfo (Setting Breakpoints): Mention and explain the
	condition-evaluation breakpoint parameter.
	Mention condition-evaluation mode being shown in "info break".
	(Break Conditions): Add description for target-side
	conditional breakpoints.
	(Remote Configuration): Mention conditional-breakpoints-packet. 
	(Packets): Add cond-expr parameter to Z0/Z1 packets and explain
	cond-expr.
	(General Query Packets): Mention new ConditionalBreakpoint feature.
	
Index: gdb/gdb/NEWS
===================================================================
--- gdb.orig/gdb/NEWS	2012-01-26 07:14:31.761821938 -0200
+++ gdb/gdb/NEWS	2012-01-26 07:14:38.113821938 -0200
@@ -34,6 +34,28 @@
 * The command "info catch" has been removed.  It has been disabled
   since December 2007.
 
+* GDBServer supports evaluation of breakpoint conditions.  When
+  support is advertised by GDBServer, GDB may be told to send the
+  breakpoint conditions in bytecode form to GDBServer.  GDBServer
+  will only report the breakpoint trigger to GDB when its condition
+  evaluates to true.
+
+* New options
+
+set breakpoint condition-evaluation
+show breakpoint condition-evaluation
+  Controls whether breakpoint conditions are evaluated by GDB ("gdb") or by
+  GDBServer ("target").
+  This option can improve debugger efficiency depending on the speed of the
+  target.
+
+* New remote packets
+
+  The z0/z1 breakpoint insertion packets have been extended to carry
+  a list of conditional expressions over to GDBServer depending on the
+  condition evaluation mode.  The use of this extension can be controlled
+  via the "set remote conditional-breakpoints-packet" command.
+
 *** Changes in GDB 7.4
 
 * GDB now handles ambiguous linespecs more consistently; the existing
Index: gdb/gdb/doc/gdb.texinfo
===================================================================
--- gdb.orig/gdb/doc/gdb.texinfo	2012-01-26 07:14:31.745821938 -0200
+++ gdb/gdb/doc/gdb.texinfo	2012-01-26 07:15:36.305821938 -0200
@@ -3484,12 +3484,17 @@ the appropriate shared library is loaded
 @end table
 
 @noindent
-If a breakpoint is conditional, @code{info break} shows the condition on
-the line following the affected breakpoint; breakpoint commands, if any,
-are listed after that.  A pending breakpoint is allowed to have a condition
-specified for it.  The condition is not parsed for validity until a shared
-library is loaded that allows the pending breakpoint to resolve to a
-valid location.
+If a breakpoint is conditional, there are two evaluation modes: ``gdb'' and
+``target''.  If mode is ``gdb'', breakpoint condition evaluation is done by
+@value{GDBN} on the host's side.  If it is ``target'', then the condition
+is evaluated by the target.  The @code{info break} command shows
+the condition on the line following the affected breakpoint, together with
+its condition evaluation mode in between parentheses.
+
+Breakpoint commands, if any, are listed after that.  A pending breakpoint is
+allowed to have a condition specified for it.  The condition is not parsed for
+validity until a shared library is loaded that allows the pending
+breakpoint to resolve to a valid location.
 
 @noindent
 @code{info break} with a breakpoint
@@ -3681,6 +3686,48 @@ controlling the inferior in all-stop mod
 @code{breakpoint always-inserted} mode is off.
 @end table
 
+@value{GDBN} handles conditional breakpoints by evaluating these conditions
+when a breakpoint breaks.  If the condition is true, then the process being
+debugged stops, otherwise the process is resumed.
+
+If the target supports evaluating conditions on its end, @value{GDBN} may
+download the breakpoint, together with its conditions, to it.
+
+This feature can be controlled via the following commands:
+
+@kindex set breakpoint condition-evaluation
+@kindex show breakpoint condition-evaluation
+@table @code
+@item set breakpoint condition-evaluation gdb
+This option commands @value{GDBN} to evaluate the breakpoint
+conditions on its own, that is, on the host's side.  Unconditional
+breakpoints are sent to the target which in turn receives the
+triggers and reports them back to GDB for condition evaluation.  This
+is the standard evaluation mode.
+
+@item set breakpoint condition-evaluation target
+This option commands @value{GDBN} to download breakpoint conditions
+to the target at the moment of their insertion.  The target
+is responsible for evaluating the conditional expression and reporting
+breakpoint stop events back to @value{GDBN} whenever the condition
+is true.  Due to limitations of target-side evaluation, some conditions
+cannot be evaluated there, e.g., conditions that depend on local data
+that is only known to the host.  Examples include
+conditional expressions involving convenience variables, complex types
+that cannot be handled by the agent expression parser and expressions
+that are too long to be sent over to the target, specially when the
+target is a remote system.  In these cases, the conditions will be
+evaluated by @value{GDBN}.
+
+@item set breakpoint condition-evaluation auto
+This is the default mode.  If the target supports evaluating breakpoint
+conditions on its end, @value{GDBN} will download breakpoint conditions to
+the target (limitations mentioned previously apply).  If the target does
+not support breakpoint condition evaluation, then @value{GDBN} will fallback
+to evaluating all these conditions by itself, on the host's side.
+@end table
+
+
 @cindex negative breakpoint numbers
 @cindex internal @value{GDBN} breakpoints
 @value{GDBN} itself sometimes sets breakpoints in your program for
@@ -4340,6 +4387,19 @@ conditions for the
 purpose of performing side effects when a breakpoint is reached
 (@pxref{Break Commands, ,Breakpoint Command Lists}).
 
+Breakpoint conditions can also be evaluated on the target's side if
+the target supports it.  Instead of evaluating the conditions locally,
+@value{GDBN} encodes the expression into an agent expression
+(@pxref{Agent Expressions}) suitable for execution on the target,
+independently of @value{GDBN}.  Global variables become raw memory
+locations, locals become stack accesses, and so forth.
+
+In this case, @value{GDBN} will only be notified of a breakpoint trigger
+when its condition evaluates to true.  This mechanism may provide faster
+response times depending on the performance characteristics of the target
+since it does not need to keep @value{GDBN} informed about
+every breakpoint trigger, even those with false conditions.
+
 Break conditions can be specified when a breakpoint is set, by using
 @samp{if} in the arguments to the @code{break} command.  @xref{Set
 Breaks, ,Setting Breakpoints}.  They can also be changed at any time
@@ -17472,6 +17532,10 @@ are:
 @item @code{disable-randomization}
 @tab @code{QDisableRandomization}
 @tab @code{set disable-randomization}
+
+@item @code{conditional-breakpoints-packet}
+@tab @code{Z0 and Z1}
+@tab @code{Support for target-side breakpoint condition evaluation}
 @end multitable
 
 @node Remote Stub
@@ -34196,7 +34260,7 @@ avoid potential problems with duplicate
 be implemented in an idempotent way.}
 
 @item z0,@var{addr},@var{kind}
-@itemx Z0,@var{addr},@var{kind}
+@itemx Z0,@var{addr},@var{kind},@r{[}conditions=@var{cond-expr0};@var{cond-expr1};@dots{};@var{cond-exprn}@r{]}
 @cindex @samp{z0} packet
 @cindex @samp{Z0} packet
 Insert (@samp{Z0}) or remove (@samp{z0}) a memory breakpoint at address
@@ -34208,6 +34272,11 @@ A memory breakpoint is implemented by re
 the breakpoint in bytes that should be inserted.  E.g., the @sc{arm}
 and @sc{mips} can insert either a 2 or 4 byte breakpoint.  Some
 architectures have additional meanings for @var{kind};
+@var{cond-exprn} is an optional list of conditional expressions in bytecode
+form that should be evaluated on the target's side.  These are the
+conditions that should be taken into consideration when deciding if
+the breakpoint trigger should be reported back to @var{GDBN}.
+
 see @ref{Architecture-Specific Protocol Details}.
 
 @emph{Implementation note: It is possible for a target to copy or move
@@ -34226,7 +34295,8 @@ for an error
 @end table
 
 @item z1,@var{addr},@var{kind}
-@itemx Z1,@var{addr},@var{kind}
+@itemx Z1,@var{addr},@var{kind},@r{[}conditions=@var{cond-expr0};@var{cond-expr1};@dots{};@var{cond-exprn}@r{]}
+
 @cindex @samp{z1} packet
 @cindex @samp{Z1} packet
 Insert (@samp{Z1}) or remove (@samp{z1}) a hardware breakpoint at
@@ -34234,7 +34304,8 @@ address @var{addr}.
 
 A hardware breakpoint is implemented using a mechanism that is not
 dependant on being able to modify the target's memory.  @var{kind}
-has the same meaning as in @samp{Z0} packets.
+and @var{cond-exprn} have the same meaning as in @samp{Z0} packets.
+
 
 @emph{Implementation note: A hardware breakpoint is not affected by code
 movement.}
@@ -35039,6 +35110,11 @@ These are the currently defined stub fea
 @tab @samp{-}
 @tab No
 
+@item @samp{ConditionalBreakpoints}
+@tab No
+@tab @samp{-}
+@tab No
+
 @item @samp{ConditionalTracepoints}
 @tab No
 @tab @samp{-}
@@ -35176,6 +35252,11 @@ indicated it supports them in its @samp{
 The remote stub understands the @samp{qXfer:osdata:read} packet
 ((@pxref{qXfer osdata read}).
 
+@item ConditionalBreakpoints
+The target accepts and implements evaluation of conditional expressions
+defined for breakpoints.  The target will only report breakpoint triggers
+when such conditions are true (@pxref{Conditions, ,Break Conditions}).
+
 @item ConditionalTracepoints
 The remote stub accepts and implements conditional expressions defined
 for tracepoints (@pxref{Tracepoint Conditions}).

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]