This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH v3 01/15] Refactor 'tsave'
On 03/14/2013 03:26 AM, Tom Tromey wrote:
> I think this needs a NULL check.
> Otherwise I think on error this may crash.
Done.
>
> Ok with that fixed.
Thanks for the review. Patch below is what I committed.
--
Yao (éå)
gdb:
2013-03-14 Yao Qi <yao@codesourcery.com>
* tracepoint.c (trace_file_writer_xfree): New.
(struct tfile_writer_data): New.
(tfile_dtor, tfile_can_target_save, tfile_start): New.
(tfile_write_header, tfile_write_regblock_type): New.
(tfile_write_status, tfile_write_uploaded_tsv): New.
(tfile_write_uploaded_tp, tfile_write_definition_end): New.
(tfile_write_raw_data, (tfile_end): New.
(tfile_write_ops): New global variable.
(TRACE_WRITE_R_BLOCK): New macro.
(TRACE_WRITE_M_BLOCK_HEADER): New macro.
(TRACE_WRITE_M_BLOCK_MEMORY): New macro.
(TRACE_WRITE_V_BLOCK): New macro.
(trace_save): Add extra one parameter WRITER. Make it static.
Use WRITER to writer trace.
(tfile_trace_file_writer_new): New.
(trace_save_command): Caller update.
(trace_save_tfile): Write trace data in TFILE format.
* tracepoint.h (struct trace_frame_write_ops): New.
(struct trace_file_write_ops): New.
(struct trace_file_writer): New.
(trace_save): Remove its declaration.
(trace_save_tfile): Declare it.
* mi/mi-main.c (mi_cmd_trace_save): Call trace_save_tfile
instead of trace_save.
---
gdb/mi/mi-main.c | 2 +-
gdb/tracepoint.c | 640 +++++++++++++++++++++++++++++++++++++++++++-----------
gdb/tracepoint.h | 108 +++++++++-
3 files changed, 619 insertions(+), 131 deletions(-)
diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c
index 20777a3..085439b 100644
--- a/gdb/mi/mi-main.c
+++ b/gdb/mi/mi-main.c
@@ -2495,7 +2495,7 @@ mi_cmd_trace_save (char *command, char **argv, int argc)
filename = argv[0];
}
- trace_save (filename, target_saves);
+ trace_save_tfile (filename, target_saves);
}
void
diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c
index 4db93ca..2bfa500 100644
--- a/gdb/tracepoint.c
+++ b/gdb/tracepoint.c
@@ -2979,90 +2979,339 @@ encode_source_string (int tpnum, ULONGEST addr,
return -1;
}
-extern int trace_regblock_size;
+/* Free trace file writer. */
-/* Save tracepoint data to file named FILENAME. If TARGET_DOES_SAVE is
- non-zero, the save is performed on the target, otherwise GDB obtains all
- trace data and saves it locally. */
+static void
+trace_file_writer_xfree (void *arg)
+{
+ struct trace_file_writer *writer = arg;
-void
-trace_save (const char *filename, int target_does_save)
+ writer->ops->dtor (writer);
+ xfree (writer);
+}
+
+/* TFILE trace writer. */
+
+struct tfile_trace_file_writer
{
- struct cleanup *cleanup;
- char *pathname;
- struct trace_status *ts = current_trace_status ();
- int err, status;
+ struct trace_file_writer base;
+
+ /* File pointer to tfile trace file. */
FILE *fp;
- struct uploaded_tp *uploaded_tps = NULL, *utp;
- struct uploaded_tsv *uploaded_tsvs = NULL, *utsv;
- int a;
- char *act;
- LONGEST gotten = 0;
- ULONGEST offset = 0;
-#define MAX_TRACE_UPLOAD 2000
- gdb_byte buf[MAX_TRACE_UPLOAD];
- int written;
+ /* Path name of the tfile trace file. */
+ char *pathname;
+};
- /* If the target is to save the data to a file on its own, then just
- send the command and be done with it. */
- if (target_does_save)
- {
- err = target_save_trace_data (filename);
- if (err < 0)
- error (_("Target failed to save trace data to '%s'."),
- filename);
- return;
- }
+/* This is the implementation of trace_file_write_ops method
+ target_save. We just call the generic target
+ target_save_trace_data to do target-side saving. */
- /* Get the trace status first before opening the file, so if the
- target is losing, we can get out without touching files. */
- status = target_get_trace_status (ts);
+static int
+tfile_target_save (struct trace_file_writer *self,
+ const char *filename)
+{
+ int err = target_save_trace_data (filename);
+
+ return (err >= 0);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ dtor. */
+
+static void
+tfile_dtor (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ xfree (writer->pathname);
+
+ if (writer->fp != NULL)
+ fclose (writer->fp);
+}
- pathname = tilde_expand (filename);
- cleanup = make_cleanup (xfree, pathname);
+/* This is the implementation of trace_file_write_ops method
+ start. It creates the trace file FILENAME and registers some
+ cleanups. */
- fp = fopen (pathname, "wb");
- if (!fp)
+static void
+tfile_start (struct trace_file_writer *self, const char *filename)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ writer->pathname = tilde_expand (filename);
+ writer->fp = fopen (writer->pathname, "wb");
+ if (writer->fp == NULL)
error (_("Unable to open file '%s' for saving trace data (%s)"),
filename, safe_strerror (errno));
- make_cleanup_fclose (fp);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_header. Write the TFILE header. */
+
+static void
+tfile_write_header (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+ int written;
/* Write a file header, with a high-bit-set char to indicate a
binary file, plus a hint as what this file is, and a version
number in case of future needs. */
- written = fwrite ("\x7fTRACE0\n", 8, 1, fp);
+ written = fwrite ("\x7fTRACE0\n", 8, 1, writer->fp);
if (written < 1)
- perror_with_name (pathname);
+ perror_with_name (writer->pathname);
+}
- /* Write descriptive info. */
+/* This is the implementation of trace_file_write_ops method
+ write_regblock_type. Write the size of register block. */
- /* Write out the size of a register block. */
- fprintf (fp, "R %x\n", trace_regblock_size);
+static void
+tfile_write_regblock_type (struct trace_file_writer *self, int size)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
- /* Write out status of the tracing run (aka "tstatus" info). */
- fprintf (fp, "status %c;%s",
+ fprintf (writer->fp, "R %x\n", size);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_status. */
+
+static void
+tfile_write_status (struct trace_file_writer *self,
+ struct trace_status *ts)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ fprintf (writer->fp, "status %c;%s",
(ts->running ? '1' : '0'), stop_reason_names[ts->stop_reason]);
if (ts->stop_reason == tracepoint_error)
{
char *buf = (char *) alloca (strlen (ts->stop_desc) * 2 + 1);
bin2hex ((gdb_byte *) ts->stop_desc, buf, 0);
- fprintf (fp, ":%s", buf);
+ fprintf (writer->fp, ":%s", buf);
}
- fprintf (fp, ":%x", ts->stopping_tracepoint);
+ fprintf (writer->fp, ":%x", ts->stopping_tracepoint);
if (ts->traceframe_count >= 0)
- fprintf (fp, ";tframes:%x", ts->traceframe_count);
+ fprintf (writer->fp, ";tframes:%x", ts->traceframe_count);
if (ts->traceframes_created >= 0)
- fprintf (fp, ";tcreated:%x", ts->traceframes_created);
+ fprintf (writer->fp, ";tcreated:%x", ts->traceframes_created);
if (ts->buffer_free >= 0)
- fprintf (fp, ";tfree:%x", ts->buffer_free);
+ fprintf (writer->fp, ";tfree:%x", ts->buffer_free);
if (ts->buffer_size >= 0)
- fprintf (fp, ";tsize:%x", ts->buffer_size);
+ fprintf (writer->fp, ";tsize:%x", ts->buffer_size);
if (ts->disconnected_tracing)
- fprintf (fp, ";disconn:%x", ts->disconnected_tracing);
+ fprintf (writer->fp, ";disconn:%x", ts->disconnected_tracing);
if (ts->circular_buffer)
- fprintf (fp, ";circular:%x", ts->circular_buffer);
- fprintf (fp, "\n");
+ fprintf (writer->fp, ";circular:%x", ts->circular_buffer);
+ fprintf (writer->fp, "\n");
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_uploaded_tsv. */
+
+static void
+tfile_write_uploaded_tsv (struct trace_file_writer *self,
+ struct uploaded_tsv *utsv)
+{
+ char *buf = "";
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ if (utsv->name)
+ {
+ buf = (char *) xmalloc (strlen (utsv->name) * 2 + 1);
+ bin2hex ((gdb_byte *) (utsv->name), buf, 0);
+ }
+
+ fprintf (writer->fp, "tsv %x:%s:%x:%s\n",
+ utsv->number, phex_nz (utsv->initial_value, 8),
+ utsv->builtin, buf);
+
+ if (utsv->name)
+ xfree (buf);
+}
+
+#define MAX_TRACE_UPLOAD 2000
+
+/* This is the implementation of trace_file_write_ops method
+ write_uploaded_tp. */
+
+static void
+tfile_write_uploaded_tp (struct trace_file_writer *self,
+ struct uploaded_tp *utp)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+ int a;
+ char *act;
+ gdb_byte buf[MAX_TRACE_UPLOAD];
+
+ fprintf (writer->fp, "tp T%x:%s:%c:%x:%x",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ (utp->enabled ? 'E' : 'D'), utp->step, utp->pass);
+ if (utp->type == bp_fast_tracepoint)
+ fprintf (writer->fp, ":F%x", utp->orig_size);
+ if (utp->cond)
+ fprintf (writer->fp,
+ ":X%x,%s", (unsigned int) strlen (utp->cond) / 2,
+ utp->cond);
+ fprintf (writer->fp, "\n");
+ for (a = 0; VEC_iterate (char_ptr, utp->actions, a, act); ++a)
+ fprintf (writer->fp, "tp A%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
+ for (a = 0; VEC_iterate (char_ptr, utp->step_actions, a, act); ++a)
+ fprintf (writer->fp, "tp S%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
+ if (utp->at_string)
+ {
+ encode_source_string (utp->number, utp->addr,
+ "at", utp->at_string, buf, MAX_TRACE_UPLOAD);
+ fprintf (writer->fp, "tp Z%s\n", buf);
+ }
+ if (utp->cond_string)
+ {
+ encode_source_string (utp->number, utp->addr,
+ "cond", utp->cond_string,
+ buf, MAX_TRACE_UPLOAD);
+ fprintf (writer->fp, "tp Z%s\n", buf);
+ }
+ for (a = 0; VEC_iterate (char_ptr, utp->cmd_strings, a, act); ++a)
+ {
+ encode_source_string (utp->number, utp->addr, "cmd", act,
+ buf, MAX_TRACE_UPLOAD);
+ fprintf (writer->fp, "tp Z%s\n", buf);
+ }
+ fprintf (writer->fp, "tp V%x:%s:%x:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ utp->hit_count,
+ phex_nz (utp->traceframe_usage,
+ sizeof (utp->traceframe_usage)));
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_definition_end. */
+
+static void
+tfile_write_definition_end (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ fprintf (writer->fp, "\n");
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_raw_data. */
+
+static void
+tfile_write_raw_data (struct trace_file_writer *self, gdb_byte *buf,
+ LONGEST len)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ if (fwrite (buf, len, 1, writer->fp) < 1)
+ perror_with_name (writer->pathname);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ end. */
+
+static void
+tfile_end (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+ uint32_t gotten = 0;
+
+ /* Mark the end of trace data. */
+ if (fwrite (&gotten, 4, 1, writer->fp) < 1)
+ perror_with_name (writer->pathname);
+}
+
+/* Operations to write trace buffers into TFILE format. */
+
+static const struct trace_file_write_ops tfile_write_ops =
+{
+ tfile_dtor,
+ tfile_target_save,
+ tfile_start,
+ tfile_write_header,
+ tfile_write_regblock_type,
+ tfile_write_status,
+ tfile_write_uploaded_tsv,
+ tfile_write_uploaded_tp,
+ tfile_write_definition_end,
+ tfile_write_raw_data,
+ NULL,
+ tfile_end,
+};
+
+/* Helper macros. */
+
+#define TRACE_WRITE_R_BLOCK(writer, buf, size) \
+ writer->ops->frame_ops->write_r_block ((writer), (buf), (size))
+#define TRACE_WRITE_M_BLOCK_HEADER(writer, addr, size) \
+ writer->ops->frame_ops->write_m_block_header ((writer), (addr), \
+ (size))
+#define TRACE_WRITE_M_BLOCK_MEMORY(writer, buf, size) \
+ writer->ops->frame_ops->write_m_block_memory ((writer), (buf), \
+ (size))
+#define TRACE_WRITE_V_BLOCK(writer, num, val) \
+ writer->ops->frame_ops->write_v_block ((writer), (num), (val))
+
+extern int trace_regblock_size;
+
+/* Save tracepoint data to file named FILENAME through WRITER. WRITER
+ determines the trace file format. If TARGET_DOES_SAVE is non-zero,
+ the save is performed on the target, otherwise GDB obtains all trace
+ data and saves it locally. */
+
+static void
+trace_save (const char *filename, struct trace_file_writer *writer,
+ int target_does_save)
+{
+ struct trace_status *ts = current_trace_status ();
+ int status;
+ struct uploaded_tp *uploaded_tps = NULL, *utp;
+ struct uploaded_tsv *uploaded_tsvs = NULL, *utsv;
+
+ ULONGEST offset = 0;
+ gdb_byte buf[MAX_TRACE_UPLOAD];
+ int written;
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
+
+ /* If the target is to save the data to a file on its own, then just
+ send the command and be done with it. */
+ if (target_does_save)
+ {
+ if (!writer->ops->target_save (writer, filename))
+ error (_("Target failed to save trace data to '%s'."),
+ filename);
+ return;
+ }
+
+ /* Get the trace status first before opening the file, so if the
+ target is losing, we can get out without touching files. */
+ status = target_get_trace_status (ts);
+
+ writer->ops->start (writer, filename);
+
+ writer->ops->write_header (writer);
+
+ /* Write descriptive info. */
+
+ /* Write out the size of a register block. */
+ writer->ops->write_regblock_type (writer, trace_regblock_size);
+
+ /* Write out status of the tracing run (aka "tstatus" info). */
+ writer->ops->write_status (writer, ts);
/* Note that we want to upload tracepoints and save those, rather
than simply writing out the local ones, because the user may have
@@ -3077,22 +3326,7 @@ trace_save (const char *filename, int target_does_save)
target_upload_trace_state_variables (&uploaded_tsvs);
for (utsv = uploaded_tsvs; utsv; utsv = utsv->next)
- {
- char *buf = "";
-
- if (utsv->name)
- {
- buf = (char *) xmalloc (strlen (utsv->name) * 2 + 1);
- bin2hex ((gdb_byte *) (utsv->name), buf, 0);
- }
-
- fprintf (fp, "tsv %x:%s:%x:%s\n",
- utsv->number, phex_nz (utsv->initial_value, 8),
- utsv->builtin, buf);
-
- if (utsv->name)
- xfree (buf);
- }
+ writer->ops->write_uploaded_tsv (writer, utsv);
free_uploaded_tsvs (&uploaded_tsvs);
@@ -3102,76 +3336,205 @@ trace_save (const char *filename, int target_does_save)
target_get_tracepoint_status (NULL, utp);
for (utp = uploaded_tps; utp; utp = utp->next)
+ writer->ops->write_uploaded_tp (writer, utp);
+
+ free_uploaded_tps (&uploaded_tps);
+
+ /* Mark the end of the definition section. */
+ writer->ops->write_definition_end (writer);
+
+ /* Get and write the trace data proper. */
+ while (1)
{
- fprintf (fp, "tp T%x:%s:%c:%x:%x",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
- (utp->enabled ? 'E' : 'D'), utp->step, utp->pass);
- if (utp->type == bp_fast_tracepoint)
- fprintf (fp, ":F%x", utp->orig_size);
- if (utp->cond)
- fprintf (fp, ":X%x,%s", (unsigned int) strlen (utp->cond) / 2,
- utp->cond);
- fprintf (fp, "\n");
- for (a = 0; VEC_iterate (char_ptr, utp->actions, a, act); ++a)
- fprintf (fp, "tp A%x:%s:%s\n",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
- for (a = 0; VEC_iterate (char_ptr, utp->step_actions, a, act); ++a)
- fprintf (fp, "tp S%x:%s:%s\n",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
- if (utp->at_string)
- {
- encode_source_string (utp->number, utp->addr,
- "at", utp->at_string, buf, MAX_TRACE_UPLOAD);
- fprintf (fp, "tp Z%s\n", buf);
- }
- if (utp->cond_string)
+ LONGEST gotten = 0;
+
+ /* The writer supports writing the contents of trace buffer
+ directly to trace file. Don't parse the contents of trace
+ buffer. */
+ if (writer->ops->write_trace_buffer != NULL)
{
- encode_source_string (utp->number, utp->addr,
- "cond", utp->cond_string,
- buf, MAX_TRACE_UPLOAD);
- fprintf (fp, "tp Z%s\n", buf);
+ /* We ask for big blocks, in the hopes of efficiency, but
+ will take less if the target has packet size limitations
+ or some such. */
+ gotten = target_get_raw_trace_data (buf, offset,
+ MAX_TRACE_UPLOAD);
+ if (gotten < 0)
+ error (_("Failure to get requested trace buffer data"));
+ /* No more data is forthcoming, we're done. */
+ if (gotten == 0)
+ break;
+
+ writer->ops->write_trace_buffer (writer, buf, gotten);
+
+ offset += gotten;
}
- for (a = 0; VEC_iterate (char_ptr, utp->cmd_strings, a, act); ++a)
+ else
{
- encode_source_string (utp->number, utp->addr, "cmd", act,
- buf, MAX_TRACE_UPLOAD);
- fprintf (fp, "tp Z%s\n", buf);
+ uint16_t tp_num;
+ uint32_t tf_size;
+ /* Parse the trace buffers according to how data are stored
+ in trace buffer in GDBserver. */
+
+ gotten = target_get_raw_trace_data (buf, offset, 6);
+
+ if (gotten == 0)
+ break;
+
+ /* Read the first six bytes in, which is the tracepoint
+ number and trace frame size. */
+ tp_num = (uint16_t)
+ extract_unsigned_integer (&buf[0], 2, byte_order);
+
+ tf_size = (uint32_t)
+ extract_unsigned_integer (&buf[2], 4, byte_order);
+
+ writer->ops->frame_ops->start (writer, tp_num);
+ gotten = 6;
+
+ if (tf_size > 0)
+ {
+ unsigned int block;
+
+ offset += 6;
+
+ for (block = 0; block < tf_size; )
+ {
+ gdb_byte block_type;
+
+ /* We'll fetch one block each time, in order to
+ handle the extremely large 'M' block. We first
+ fetch one byte to get the type of the block. */
+ gotten = target_get_raw_trace_data (buf, offset, 1);
+ if (gotten < 1)
+ error (_("Failure to get requested trace buffer data"));
+
+ gotten = 1;
+ block += 1;
+ offset += 1;
+
+ block_type = buf[0];
+ switch (block_type)
+ {
+ case 'R':
+ gotten
+ = target_get_raw_trace_data (buf, offset,
+ trace_regblock_size);
+ if (gotten < trace_regblock_size)
+ error (_("Failure to get requested trace"
+ " buffer data"));
+
+ TRACE_WRITE_R_BLOCK (writer, buf,
+ trace_regblock_size);
+ break;
+ case 'M':
+ {
+ unsigned short mlen;
+ ULONGEST addr;
+ LONGEST t;
+ int j;
+
+ t = target_get_raw_trace_data (buf,offset, 10);
+ if (t < 10)
+ error (_("Failure to get requested trace"
+ " buffer data"));
+
+ offset += 10;
+ block += 10;
+
+ gotten = 0;
+ addr = (ULONGEST)
+ extract_unsigned_integer (buf, 8,
+ byte_order);
+ mlen = (unsigned short)
+ extract_unsigned_integer (&buf[8], 2,
+ byte_order);
+
+ TRACE_WRITE_M_BLOCK_HEADER (writer, addr,
+ mlen);
+
+ /* The memory contents in 'M' block may be
+ very large. Fetch the data from the target
+ and write them into file one by one. */
+ for (j = 0; j < mlen; )
+ {
+ unsigned int read_length;
+
+ if (mlen - j > MAX_TRACE_UPLOAD)
+ read_length = MAX_TRACE_UPLOAD;
+ else
+ read_length = mlen - j;
+
+ t = target_get_raw_trace_data (buf,
+ offset + j,
+ read_length);
+ if (t < read_length)
+ error (_("Failure to get requested"
+ " trace buffer data"));
+
+ TRACE_WRITE_M_BLOCK_MEMORY (writer, buf,
+ read_length);
+
+ j += read_length;
+ gotten += read_length;
+ }
+
+ break;
+ }
+ case 'V':
+ {
+ int vnum;
+ LONGEST val;
+
+ gotten
+ = target_get_raw_trace_data (buf, offset,
+ 12);
+ if (gotten < 12)
+ error (_("Failure to get requested"
+ " trace buffer data"));
+
+ vnum = (int) extract_signed_integer (buf,
+ 4,
+ byte_order);
+ val
+ = extract_signed_integer (&buf[4], 8,
+ byte_order);
+
+ TRACE_WRITE_V_BLOCK (writer, vnum, val);
+ }
+ break;
+ default:
+ error (_("Unknown block type '%c' (0x%x) in"
+ " trace frame"),
+ block_type, block_type);
+ }
+
+ block += gotten;
+ offset += gotten;
+ }
+ }
+ else
+ offset += gotten;
+
+ writer->ops->frame_ops->end (writer);
}
- fprintf (fp, "tp V%x:%s:%x:%s\n",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
- utp->hit_count,
- phex_nz (utp->traceframe_usage,
- sizeof (utp->traceframe_usage)));
}
- free_uploaded_tps (&uploaded_tps);
+ writer->ops->end (writer);
+}
- /* Mark the end of the definition section. */
- fprintf (fp, "\n");
+/* Return a trace writer for TFILE format. */
- /* Get and write the trace data proper. We ask for big blocks, in
- the hopes of efficiency, but will take less if the target has
- packet size limitations or some such. */
- while (1)
- {
- gotten = target_get_raw_trace_data (buf, offset, MAX_TRACE_UPLOAD);
- if (gotten < 0)
- error (_("Failure to get requested trace buffer data"));
- /* No more data is forthcoming, we're done. */
- if (gotten == 0)
- break;
- written = fwrite (buf, gotten, 1, fp);
- if (written < 1)
- perror_with_name (pathname);
- offset += gotten;
- }
+static struct trace_file_writer *
+tfile_trace_file_writer_new (void)
+{
+ struct tfile_trace_file_writer *writer
+ = xmalloc (sizeof (struct tfile_trace_file_writer));
- /* Mark the end of trace data. (We know that gotten is 0 at this point.) */
- written = fwrite (&gotten, 4, 1, fp);
- if (written < 1)
- perror_with_name (pathname);
+ writer->base.ops = &tfile_write_ops;
+ writer->fp = NULL;
+ writer->pathname = NULL;
- do_cleanups (cleanup);
+ return (struct trace_file_writer *) writer;
}
static void
@@ -3181,6 +3544,7 @@ trace_save_command (char *args, int from_tty)
char **argv;
char *filename = NULL;
struct cleanup *back_to;
+ struct trace_file_writer *writer = NULL;
if (args == NULL)
error_no_arg (_("file in which to save trace data"));
@@ -3201,7 +3565,11 @@ trace_save_command (char *args, int from_tty)
if (!filename)
error_no_arg (_("file in which to save trace data"));
- trace_save (filename, target_does_save);
+ writer = tfile_trace_file_writer_new ();
+
+ make_cleanup (trace_file_writer_xfree, writer);
+
+ trace_save (filename, writer, target_does_save);
if (from_tty)
printf_filtered (_("Trace data saved to file '%s'.\n"), filename);
@@ -3209,6 +3577,20 @@ trace_save_command (char *args, int from_tty)
do_cleanups (back_to);
}
+/* Save the trace data to file FILENAME of tfile format. */
+
+void
+trace_save_tfile (const char *filename, int target_does_save)
+{
+ struct trace_file_writer *writer;
+ struct cleanup *back_to;
+
+ writer = tfile_trace_file_writer_new ();
+ back_to = make_cleanup (trace_file_writer_xfree, writer);
+ trace_save (filename, writer, target_does_save);
+ do_cleanups (back_to);
+}
+
/* Tell the target what to do with an ongoing tracing run if GDB
disconnects for some reason. */
diff --git a/gdb/tracepoint.h b/gdb/tracepoint.h
index b03c95b..a5d3d42 100644
--- a/gdb/tracepoint.h
+++ b/gdb/tracepoint.h
@@ -205,6 +205,111 @@ struct static_tracepoint_marker
char *extra;
};
+struct trace_file_writer;
+
+/* Operations to write trace frames to a specific trace format. */
+
+struct trace_frame_write_ops
+{
+ /* Write a new trace frame. The tracepoint number of this trace
+ frame is TPNUM. */
+ void (*start) (struct trace_file_writer *self, uint16_t tpnum);
+
+ /* Write an 'R' block. Buffer BUF contains its contents and SIZE is
+ its size. */
+ void (*write_r_block) (struct trace_file_writer *self,
+ gdb_byte *buf, int32_t size);
+
+ /* Write an 'M' block, the header and memory contents respectively.
+ The header of 'M' block is composed of the start address and the
+ length of memory collection, and the memory contents contain
+ the collected memory contents in tracing.
+ For extremely large M block, GDB is unable to get its contents
+ and write them into trace file in one go, due to the limitation
+ of the remote target or the size of internal buffer, we split
+ the operation to 'M' block to two operations. */
+ /* Write the head of 'M' block. ADDR is the start address of
+ collected memory and LENGTH is the length of memory contents. */
+ void (*write_m_block_header) (struct trace_file_writer *self,
+ uint64_t addr, uint16_t length);
+ /* Write the memory contents of 'M' block. Buffer BUF contains
+ its contents and LENGTH is its length. This method can be called
+ multiple times to write large memory contents of a single 'M'
+ block. */
+ void (*write_m_block_memory) (struct trace_file_writer *self,
+ gdb_byte *buf, uint16_t length);
+
+ /* Write a 'V' block. NUM is the trace variable number and VAL is
+ the value of the trace variable. */
+ void (*write_v_block) (struct trace_file_writer *self, int32_t num,
+ uint64_t val);
+
+ /* The end of the trace frame. */
+ void (*end) (struct trace_file_writer *self);
+};
+
+/* Operations to write trace buffers to a specific trace format. */
+
+struct trace_file_write_ops
+{
+ /* Destructor. Releases everything from SELF (but not SELF
+ itself). */
+ void (*dtor) (struct trace_file_writer *self);
+
+ /* Save the data to file or directory NAME of desired format in
+ target side. Return true for success, otherwise return
+ false. */
+ int (*target_save) (struct trace_file_writer *self,
+ const char *name);
+
+ /* Write the trace buffers to file or directory NAME. */
+ void (*start) (struct trace_file_writer *self,
+ const char *name);
+
+ /* Write the trace header. */
+ void (*write_header) (struct trace_file_writer *self);
+
+ /* Write the type of block about registers. SIZE is the size of
+ all registers on the target. */
+ void (*write_regblock_type) (struct trace_file_writer *self,
+ int size);
+
+ /* Write trace status TS. */
+ void (*write_status) (struct trace_file_writer *self,
+ struct trace_status *ts);
+
+ /* Write the uploaded TSV. */
+ void (*write_uploaded_tsv) (struct trace_file_writer *self,
+ struct uploaded_tsv *tsv);
+
+ /* Write the uploaded tracepoint TP. */
+ void (*write_uploaded_tp) (struct trace_file_writer *self,
+ struct uploaded_tp *tp);
+
+ /* Write to mark the end of the definition part. */
+ void (*write_definition_end) (struct trace_file_writer *self);
+
+ /* Write the data of trace buffer without parsing. The content is
+ in BUF and length is LEN. */
+ void (*write_trace_buffer) (struct trace_file_writer *self,
+ gdb_byte *buf, LONGEST len);
+
+ /* Operations to write trace frames. The user of this field is
+ responsible to parse the data of trace buffer. Either field
+ 'write_trace_buffer' or field ' frame_ops' is NULL. */
+ const struct trace_frame_write_ops *frame_ops;
+
+ /* The end of writing trace buffers. */
+ void (*end) (struct trace_file_writer *self);
+};
+
+/* Trace file writer for a given format. */
+
+struct trace_file_writer
+{
+ const struct trace_file_write_ops *ops;
+};
+
extern void parse_static_tracepoint_marker_definition
(char *line, char **pp,
struct static_tracepoint_marker *marker);
@@ -281,7 +386,8 @@ extern void tfind_1 (enum trace_find_type type, int num,
ULONGEST addr1, ULONGEST addr2,
int from_tty);
-extern void trace_save (const char *filename, int target_does_save);
+extern void trace_save_tfile (const char *filename,
+ int target_does_save);
extern struct traceframe_info *parse_traceframe_info (const char *tframe_info);
--
1.7.7.6