This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[pushed] Don't suppress errors inserting/removing hardware breakpoints in shared libraries.


As explained in
https://sourceware.org/ml/gdb-patches/2008-08/msg00361.html, after a
shared library was unloaded, we can no longer insert or remove
breakpoints into/from its (no longer present) code segment.  That'll
fail with memory errors.  However, that concern does not apply to
hardware breakpoints.  By definition, hardware breakpoints are
implemented using a mechanism that is not dependent on being able to
modify the target's memory.  Usually, by setting up CPU debug
registers.  IOW, we should be able to set hw breakpoints in an
unmapped address.  We don't seem to have a test that exercises that,
so this patch adds one.

I noticed the error supression because of a related issue -- the
target_insert_hw_breakpoint/target_remove_hw_breakpoint interfaces
don't really distinguish "not supported" from "error" return, and so
remote.c returns -1 in both cases.  This results in hardware
breakpoints set in shared libraries silently ending up pending forever
even though the target doesn't actually support hw breakpoints.

 (gdb) set breakpoint always-inserted on
 (gdb) set remote Z-packet off
 (gdb) info breakpoints
 No breakpoints or watchpoints.
 (gdb) hbreak shrfunc
 Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
 (gdb) info break
 Num     Type           Disp Enb Address            What
 3       hw breakpoint  keep y   <PENDING>          shrfunc

After the patch we get the expected:

 (gdb) hbreak shrfunc
 Hardware assisted breakpoint 3 at 0x7ffff7dfb657: file ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c, line 21.
 Warning:
 Cannot insert hardware breakpoint 3.
 Could not insert hardware breakpoints:
 You may have requested too many hardware breakpoints/watchpoints.

 (gdb) info break
 Num     Type           Disp Enb Address            What
 3       hw breakpoint  keep y   0x00007ffff7dfb657 in shrfunc at ../../../src/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c:21

(HW breakpoints set in the main executable, when the target doesn't
support HW breakpoints always resulted in the latter output.)

We probably should improve the insert/remove interface to return a
different error code for unsupported.  But I chose to fix the error
supression first, as it's a deeper and wider issue.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2014-04-23  Pedro Alves  <palves@redhat.com>

	* breakpoint.c (insert_bp_location, remove_breakpoint_1): If
	the breakpoint is set in a shared library, only suppress
	errors for software breakpoints, not hardware breakpoints.

gdb/testsuite/
2014-04-23  Pedro Alves  <palves@redhat.com>

	* gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
	* gdb.base/hbreak-in-shr-unsupported.c: New file.
	* gdb.base/hbreak-in-shr-unsupported.exp: New file.
	* gdb.base/hbreak-unmapped.c: New file.
	* gdb.base/hbreak-unmapped.exp: New file.
	* gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
	* lib/gdb.exp (gdb_is_target_remote): ... here.
---
 gdb/ChangeLog                                      |   6 ++
 gdb/breakpoint.c                                   |  14 +--
 gdb/testsuite/ChangeLog                            |  10 ++
 .../gdb.base/hbreak-in-shr-unsupported-shr.c       |  22 ++++
 gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.c |  28 +++++
 .../gdb.base/hbreak-in-shr-unsupported.exp         | 120 +++++++++++++++++++++
 gdb/testsuite/gdb.base/hbreak-unmapped.c           |  22 ++++
 gdb/testsuite/gdb.base/hbreak-unmapped.exp         |  72 +++++++++++++
 gdb/testsuite/gdb.trace/qtro.exp                   |  16 ---
 gdb/testsuite/lib/gdb.exp                          |  19 ++++
 10 files changed, 307 insertions(+), 22 deletions(-)
 create mode 100644 gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c
 create mode 100644 gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.c
 create mode 100644 gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
 create mode 100644 gdb/testsuite/gdb.base/hbreak-unmapped.c
 create mode 100644 gdb/testsuite/gdb.base/hbreak-unmapped.exp

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 6de9f69..4066217 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2014-04-23  Pedro Alves  <palves@redhat.com>
+
+	* breakpoint.c (insert_bp_location, remove_breakpoint_1): If
+	the breakpoint is set in a shared library, only suppress
+	errors for software breakpoints, not hardware breakpoints.
+
 2014-04-22  Pedro Alves  <palves@redhat.com>
 
 	* infrun.c (schedlock_applies): New function, factored out from
diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index f777a4a..19a7376 100644
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -2642,12 +2642,12 @@ insert_bp_location (struct bp_location *bl,
 	     breakpoint in a shared library that has already been
 	     removed, but we have not yet processed the shlib unload
 	     event.  Unfortunately, some targets that implement
-	     breakpoint insertion themselves (necessary if this is a
-	     HW breakpoint, but SW breakpoints likewise) can't tell
-	     why the breakpoint insertion failed (e.g., the remote
-	     target doesn't define error codes), so we must treat
-	     generic errors as memory errors.  */
+	     breakpoint insertion themselves can't tell why the
+	     breakpoint insertion failed (e.g., the remote target
+	     doesn't define error codes), so we must treat generic
+	     errors as memory errors.  */
 	  if ((bp_err == GENERIC_ERROR || bp_err == MEMORY_ERROR)
+	      && bl->loc_type == bp_loc_software_breakpoint
 	      && solib_name_from_address (bl->pspace, bl->address))
 	    {
 	      /* See also: disable_breakpoints_in_shlibs.  */
@@ -3826,7 +3826,9 @@ remove_breakpoint_1 (struct bp_location *bl, insertion_state_t is)
       /* In some cases, we might not be able to remove a breakpoint
 	 in a shared library that has already been removed, but we
 	 have not yet processed the shlib unload event.  */
-      if (val && solib_name_from_address (bl->pspace, bl->address))
+      if (val
+	  && bl->loc_type == bp_loc_software_breakpoint
+	  && solib_name_from_address (bl->pspace, bl->address))
 	val = 0;
 
       if (val)
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 2f42ad1..5502a08 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,3 +1,13 @@
+2014-04-23  Pedro Alves  <palves@redhat.com>
+
+	* gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
+	* gdb.base/hbreak-in-shr-unsupported.c: New file.
+	* gdb.base/hbreak-in-shr-unsupported.exp: New file.
+	* gdb.base/hbreak-unmapped.c: New file.
+	* gdb.base/hbreak-unmapped.exp: New file.
+	* gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
+	* lib/gdb.exp (gdb_is_target_remote): ... here.
+
 2014-04-22  Pedro Alves  <palves@redhat.com>
 
 	* gdb.base/consecutive-step-over.c: New file.
diff --git a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c
new file mode 100644
index 0000000..c48260e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported-shr.c
@@ -0,0 +1,22 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2004-2014 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>. */
+
+int
+shrfunc (int x)
+{
+  return x * 10;
+}
diff --git a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.c b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.c
new file mode 100644
index 0000000..edf0687
--- /dev/null
+++ b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.c
@@ -0,0 +1,28 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2004-2014 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>. */
+
+extern int shrfunc (int x);
+
+int
+main (void)
+{
+  int y;
+
+  y = shrfunc (1);
+
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
new file mode 100644
index 0000000..8623d13
--- /dev/null
+++ b/gdb/testsuite/gdb.base/hbreak-in-shr-unsupported.exp
@@ -0,0 +1,120 @@
+# Copyright 2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+# Test that trying to inserting a hw breakpoint in a shared library
+# when the target doesn't support hw breakpoints doesn't silently
+# error out without informing the user.
+
+if {[skip_shlib_tests]} {
+    return -1
+}
+
+set main_src hbreak-in-shr-unsupported.c
+set lib_src hbreak-in-shr-unsupported-shr.c
+standard_testfile ${main_src} ${lib_src}
+set lib_basename hbreak-in-shr-unsupported-shr.so
+set lib_so [standard_output_file ${lib_basename}]
+
+set lib_opts "debug"
+set exec_opts [list debug shlib=${lib_so}]
+
+if [get_compiler_info] {
+    return -1
+}
+
+if { [gdb_compile_shlib ${srcdir}/${subdir}/${lib_src} ${lib_so} $lib_opts] != ""
+     || [gdb_compile ${srcdir}/${subdir}/${main_src} ${binfile} executable $exec_opts] != ""} {
+    untested "Could not compile ${subdir}/$lib_src or ${subdir}/$srcfile."
+    return -1
+}
+
+clean_restart $binfile
+gdb_load_shlibs $lib_so
+
+if ![runto_main] then {
+    fail "Can't run to main"
+    return -1
+}
+
+set is_target_remote [gdb_is_target_remote]
+
+# Get main breakpoint out of the way.
+delete_breakpoints
+
+# Easier to test if GDB inserts breakpoints immediately.
+gdb_test_no_output "set breakpoint always-inserted on"
+
+# Force-disable Z1 packets, in case the target actually supports
+# these.
+if {$is_target_remote} {
+    gdb_test_no_output "set remote Z-packet off"
+}
+
+# Probe for hw breakpoints support.  With Z packets disabled, this
+# should always fail with remote targets.  For other targets, with no
+# way to force-disable hw breakpoints support, best we can do is skip
+# the remainder of the test if hardware breakpoint insertion in a
+# function in the main executable succeeds.
+set cant_insert_hbreak 0
+set supports_hbreak 0
+set test "probe hbreak support"
+gdb_test_multiple "hbreak main" $test {
+    -re "No hardware breakpoint support in the target.*$gdb_prompt $" {
+	pass $test
+    }
+    -re "Hardware breakpoints used exceeds limit.*$gdb_prompt $" {
+	pass $test
+    }
+    -re "Cannot insert hardware breakpoint.*$gdb_prompt $" {
+	set cant_insert_hbreak 1
+	set supports_hbreak 1
+	pass $test
+    }
+    -re "Hardware assisted breakpoint.*at.* file .*$srcfile, line.*$gdb_prompt $" {
+	set supports_hbreak 1
+	if {$is_target_remote} {
+	    # Z-packets have been force-disabled, so this shouldn't
+	    # happen.
+	    fail $test
+	} else {
+	    pass $test
+	}
+    }
+}
+
+if {!$supports_hbreak} {
+    unsupported "no hbreak support"
+    return
+}
+
+if {!$cant_insert_hbreak} {
+    unsupported "can't disable hw breakpoint support"
+    return
+}
+
+# Get previous hw breakpoint out of the way.
+delete_breakpoints
+
+# Without target support, this should always complain.  GDB used to
+# suppress the error if the breakpoint was set in a shared library.
+# While that makes sense for software breakpoints (the memory might be
+# unmapped), it doesn't for hardware breakpoints, as those by
+# definition are implemented using a mechanism that is not dependent
+# on being able to modify the target's memory.
+gdb_test "hbreak shrfunc" "Cannot insert hardware breakpoint.*" \
+    "hbreak shrfunc complains"
+
+gdb_test "info break" "hw breakpoint.*y.*$hex.*in shrfunc at.*" \
+    "breakpoint not pending"
diff --git a/gdb/testsuite/gdb.base/hbreak-unmapped.c b/gdb/testsuite/gdb.base/hbreak-unmapped.c
new file mode 100644
index 0000000..4b94803
--- /dev/null
+++ b/gdb/testsuite/gdb.base/hbreak-unmapped.c
@@ -0,0 +1,22 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2014 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+int
+main (void)
+{
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/hbreak-unmapped.exp b/gdb/testsuite/gdb.base/hbreak-unmapped.exp
new file mode 100644
index 0000000..5cb655c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/hbreak-unmapped.exp
@@ -0,0 +1,72 @@
+# Copyright 2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+if {[skip_hw_breakpoint_tests]} {
+    return 0
+}
+
+standard_testfile
+
+if {[prepare_for_testing "failed to prepare" ${testfile} ${srcfile}]} {
+    return -1
+}
+
+if ![runto_main] {
+    fail "Can't run to main"
+    return -1
+}
+
+delete_breakpoints
+
+# Test whether the target supports hardware breakpoints at all.
+
+set supports_hbreak 0
+set test "probe hardware breakpoint support"
+gdb_test_multiple "hbreak main" $test {
+    -re "No hardware breakpoint support in the target.*$gdb_prompt $" {
+	pass $test
+    }
+    -re "Hardware breakpoints used exceeds limit.*$gdb_prompt $" {
+	pass $test
+    }
+    -re "Hardware assisted breakpoint.*at.* file .*$srcfile, line.*$gdb_prompt $" {
+	set supports_hbreak 1
+	pass $test
+    }
+}
+
+if {!$supports_hbreak} {
+    unsupported "hardware breakpoints"
+    return
+}
+
+delete_breakpoints
+
+# Force immediate breakpoint insertion.
+gdb_test_no_output "set breakpoint always-inserted on"
+
+# Hardware breakpoints are implemented using a mechanism that is not
+# dependent on being able to modify the target's memory, we should be
+# able to set them even in unmapped memory areas.
+gdb_test "hbreak *0" "Hardware assisted breakpoint \[0-9\]+ at 0x0"
+
+gdb_test "info break" "hw breakpoint.*y.*0x0\+\[ \t\]\+" \
+    "info break shows hw breakpoint"
+
+gdb_test_no_output "delete \$bpnum" "" "delete" \
+    "delete hw breakpoint"
+
+gdb_test "info break" "No breakpoints or watchpoints\." \
+    "info break shows no breakpoints"
diff --git a/gdb/testsuite/gdb.trace/qtro.exp b/gdb/testsuite/gdb.trace/qtro.exp
index 8470a0f..22b5051 100644
--- a/gdb/testsuite/gdb.trace/qtro.exp
+++ b/gdb/testsuite/gdb.trace/qtro.exp
@@ -35,22 +35,6 @@ if ![runto_main] {
 # Check whether we're testing with the remote or extended-remote
 # targets, and whether the target supports tracepoints.
 
-proc gdb_is_target_remote { } {
-    global gdb_prompt
-
-    set test "probe for target remote"
-    gdb_test_multiple "maint print target-stack" $test {
-	-re ".*emote serial target in gdb-specific protocol.*$gdb_prompt $" {
-	    pass $test
-	    return 1
-	}
-	-re "$gdb_prompt $" {
-	    pass $test
-	}
-    }
-    return 0
-}
-
 if ![gdb_is_target_remote] {
     return -1
 }
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index d904b81..a9fdc99 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -2454,6 +2454,25 @@ proc skip_libstdcxx_probe_tests {} {
     return $ok
 }
 
+# Check whether we're testing with the remote or extended-remote
+# targets.
+
+proc gdb_is_target_remote {} {
+    global gdb_prompt
+
+    set test "probe for target remote"
+    gdb_test_multiple "maint print target-stack" $test {
+	-re ".*emote serial target in gdb-specific protocol.*$gdb_prompt $" {
+	    pass $test
+	    return 1
+	}
+	-re "$gdb_prompt $" {
+	    pass $test
+	}
+    }
+    return 0
+}
+
 set compiler_info		"unknown"
 set gcc_compiled		0
 set hp_cc_compiler		0
-- 
1.7.11.7


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]