This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH] Fix "attach" command vs user input race [Re: Regression for attach from stdin [Re: [pushed] Re: [PATCH v6 0/2] enable target-async by default]]


On 07/03/2014 04:38 PM, Pedro Alves wrote:
> On 07/02/2014 10:15 AM, Pedro Alves wrote:
>> On 07/02/2014 09:59 AM, Mark Wielaard wrote:
>>> Thanks for tracking this down Jan. Should this patch be reverted 
>>
>> Unless it turns into a deep rat hole, I'd like to fix the issue
>> instead.  I haven't investigated this particular issue yet, but I've
>> been busy fixing PR17072, and I ended up fixing several issues
>> related to execution commands entered directly in the command line,
>> before GDB's main event loop starts.  This one sounds related.
> 
> Looking at this now.  The other series unfortunately doesn't fix this.
> 

Here's a fix.  Let me know whether it fixes guality testing.

You can also find it at:

 git@github.com:palves/gdb.git palves/attach_from_stdin

I've also pushed it on top of the palves/pr17072_pagination_async
branch, in case the other fixes on that branch (posted yesterday)
are necessary.

Thanks,
Pedro Alves

8<----------

>From f93645049c02459bedada7b61fea633f59a47817 Mon Sep 17 00:00:00 2001
From: Pedro Alves <palves@redhat.com>
Date: Fri, 4 Jul 2014 13:47:53 +0100
Subject: [PATCH] Fix "attach" command vs user input race

On async targets, a synchronous attach is done like this:

   #1 - target_attach is called (PTRACE_ATTACH is issued)
   #2 - a continuation is installed
   #3 - we go back to the event loop
   #4 - target reports stop (SIGSTOP), event loop wakes up, and
        attach continuation is called
   #5 - among other things, the continuation calls
        target_terminal_inferior, which removes stdin from the event
        loop

Note that in #3, GDB is still processing user input.  If the user is
fast enough, e.g., with something like:

  echo -e "attach PID\nset xxx=1" | gdb

... then the "set" command is processed before the attach completes.

We get worse behavior even, if input is a tty and therefore
readline/editing is enabled, with e.g.,:

 (gdb) attach PID\nset xxx=1

we then crash readline/gdb, with:

 Attaching to program: attach-wait-input, process 14537
 readline: readline_callback_read_char() called with no handler!
 Aborted
 $

Fix this by calling target_terminal_inferior before #3 above.

The test covers both scenarios by running with editing/readline forced
to both on and off.

gdb/
2014-07-04  Pedro Alves  <palves@redhat.com>

	* infcmd.c (attach_command_post_wait): Don't call
	target_terminal_inferior here.
	(attach_command): Call it here instead.

gdb/testsuite/
2014-07-04  Pedro Alves  <palves@redhat.com>

	* gdb.base/attach-fg-no-stdin.exp: New file.
	* gdb.base/attach-fg-no-stdin.c: New file.
---
 gdb/infcmd.c                                 |   9 +-
 gdb/testsuite/gdb.base/attach-wait-input.c   |  47 +++++++++++
 gdb/testsuite/gdb.base/attach-wait-input.exp | 119 +++++++++++++++++++++++++++
 3 files changed, 170 insertions(+), 5 deletions(-)
 create mode 100644 gdb/testsuite/gdb.base/attach-wait-input.c
 create mode 100644 gdb/testsuite/gdb.base/attach-wait-input.exp

diff --git a/gdb/infcmd.c b/gdb/infcmd.c
index c4bb401..76ab12b 100644
--- a/gdb/infcmd.c
+++ b/gdb/infcmd.c
@@ -2381,9 +2381,6 @@ attach_command_post_wait (char *args, int from_tty, int async_exec)

   post_create_inferior (&current_target, from_tty);

-  /* Install inferior's terminal modes.  */
-  target_terminal_inferior ();
-
   if (async_exec)
     {
       /* The user requested an `attach&', so be sure to leave threads
@@ -2495,9 +2492,11 @@ attach_command (char *args, int from_tty)
      shouldn't refer to attach_target again.  */
   attach_target = NULL;

-  /* Set up the "saved terminal modes" of the inferior
-     based on what modes we are starting it with.  */
+  /* Set up the "saved terminal modes" of the inferior based on what
+     modes we are starting it with, and remove stdin from the event
+     loop.  */
   target_terminal_init ();
+  target_terminal_inferior ();

   /* Set up execution context to know that we should return from
      wait_for_inferior as soon as the target reports a stop.  */
diff --git a/gdb/testsuite/gdb.base/attach-wait-input.c b/gdb/testsuite/gdb.base/attach-wait-input.c
new file mode 100644
index 0000000..bb99b1f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/attach-wait-input.c
@@ -0,0 +1,47 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2014 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+/* This program is intended to be started outside of gdb, and then
+   attached to by gdb.  Thus, it simply spins in a loop.  The loop
+   is exited when & if the variable 'should_exit' is non-zero.  (It
+   is initialized to zero in this program, so the loop will never
+   exit unless/until gdb sets the variable to non-zero.)
+   */
+
+#include <sys/types.h>
+#include <unistd.h>
+
+volatile int should_exit = 0;
+int mypid;
+
+static void
+setup_done (void)
+{
+}
+
+int
+main (void)
+{
+  unsigned int counter = 1;
+
+  mypid = getpid ();
+  setup_done ();
+
+  for (counter = 0; !should_exit && counter < 100; counter++)
+    sleep (1);
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/attach-wait-input.exp b/gdb/testsuite/gdb.base/attach-wait-input.exp
new file mode 100644
index 0000000..3120778
--- /dev/null
+++ b/gdb/testsuite/gdb.base/attach-wait-input.exp
@@ -0,0 +1,119 @@
+# Copyright 1997-2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+# Verify that GDB waits for the "attach" command to finish before
+# processing the following command.
+#
+# GDB used to have a race where on async targets, in the small window
+# between the attach request and the initial stop for the attach, GDB
+# was still processing user input.
+#
+# The issue was originally detected with:
+#
+#  echo -e "attach PID\nset xxx=1" | gdb
+#
+# In that scenario, stdin is not a tty, which disables readline.
+# Explicitly turning off editing exercises the same code path, and is
+# simpler to do, so we test with both editing on and off.
+
+# The test uses the "attach" command.
+if [target_info exists use_gdb_stub] {
+    return
+}
+
+standard_testfile
+
+if {[build_executable "failed to build" $testfile $srcfile debug]} {
+    return -1
+}
+
+# Start the program running, and return its PID, ready for attaching.
+
+proc start_program {binfile} {
+    global gdb_prompt
+    global decimal
+
+    clean_restart $binfile
+
+    if ![runto setup_done] then {
+	fail "Can't run to setup_done"
+	return 0
+    }
+
+    # Get the PID of the test process.
+    set testpid ""
+    set test "get inferior process ID"
+    gdb_test_multiple "p mypid" $test {
+	-re " = ($decimal)\r\n$gdb_prompt $" {
+	    set testpid $expect_out(1,string)
+	    pass $test
+	}
+    }
+
+    gdb_test "detach" "Detaching from program: .*"
+
+    if {$testpid == ""} {
+	return
+    }
+
+    return $testpid
+}
+
+# Do test proper.  EDITING indicates whether "set editing" is on or
+# off.
+
+proc test { editing } {
+    global gdb_prompt
+    global binfile
+    global decimal
+
+    with_test_prefix "editing $editing" {
+
+	set testpid [start_program $binfile]
+	if {$testpid == ""} {
+	    return
+	}
+
+	# Enable/disable readline.
+	gdb_test_no_output "set editing $editing"
+
+	# Send both commands at once.
+	send_gdb "attach $testpid\nprint should_exit = 1\n"
+
+	# Use gdb_expect directly instead of gdb_test_multiple to
+	# avoid races with the double prompt.
+	set test "attach and print"
+	gdb_expect {
+	    -re "Attaching to program.*process $testpid\r\n.*$gdb_prompt.*$decimal = 1\r\n$gdb_prompt $" {
+		pass "$test"
+	    }
+	    timeout {
+		fail "$test (timeout)"
+	    }
+	}
+
+	# As we've used attach, on quit, we'll detach from the
+	# program.  Explicitly kill it in case we failed above.
+	gdb_test "kill" \
+	    "" \
+	    "after attach, exit" \
+	    "Kill the program being debugged.*y or n. $" \
+	    "y"
+    }
+}
+
+foreach editing {"on" "off"} {
+    test $editing
+}
-- 
1.9.3



Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]