This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 3/3] ppc/*: Change immediatly to immediately.
- From: Joel Sherrill <joel dot sherrill at oarcorp dot com>
- To: gdb-patches at sourceware dot org
- Cc: Joel Sherrill <joel dot sherrill at oarcorp dot com>
- Date: Thu, 21 Aug 2014 08:56:27 -0500
- Subject: [PATCH 3/3] ppc/*: Change immediatly to immediately.
- Authentication-results: sourceware.org; auth=none
- References: <1408629387-32720-1-git-send-email-joel dot sherrill at oarcorp dot com>
* ChangeLog, ChangeLog.00, hw_com.c, ld-cache.h, ppc-instructions:
Change immediatly to immediately.
---
sim/ppc/ChangeLog | 1521 +++++++++++++++++++++++++++++++++++++++++++++-
sim/ppc/ChangeLog.00 | 2 +-
sim/ppc/hw_com.c | 4 +-
sim/ppc/ld-cache.h | 2 +-
sim/ppc/ppc-instructions | 2 +-
5 files changed, 1525 insertions(+), 6 deletions(-)
diff --git a/sim/ppc/ChangeLog b/sim/ppc/ChangeLog
index 0ee34ef..011295d 100644
--- a/sim/ppc/ChangeLog
+++ b/sim/ppc/ChangeLog
@@ -1,3 +1,1522 @@
+2014-08-21 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * ChangeLog, ChangeLog.00, hw_com.c, ld-cache.h, ppc-instructions:
+ Change immediatly to immediately.
+
+2014-07-01 Chen Gang <gang.chen.5i5j@gmail.com>
+
+ * sim/microblaze/interp.c: Use long int format instead of int
+ format to avoid compiling warnings.
+
+2014-03-12 Nick Clifton <nickc@redhat.com>
+
+ * MAINTAINERS: Add myself as the maintainer for the MSP430.
+
+2014-03-10 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
+ * configure: Regenerate.
+
+2014-01-06 Tom Tromey <tromey@redhat.com>
+
+ * common/cgen-trace.c: Don't use old VA_* macros.
+ * common/sim-load.c (xprintf): Likewise.
+ * common/sim-trace.c (trace_printf, debug_printf): Likewise.
+
+2014-01-06 Tom Tromey <tromey@redhat.com>
+
+ * README-HACKING: Don't use PARAMS.
+ * arm/wrapper.c: Don't use PARAMS.
+ * bfin/sim-main.h: Don't use PARAMS.
+ * common/callback.c: Don't use PARAMS.
+ * common/cgen-trace.c: Don't use PARAMS.
+ * common/run-sim.h: Don't use PARAMS.
+ * common/run.c: Don't use PARAMS.
+ * common/sim-base.h: Don't use PARAMS.
+ * common/sim-load.c: Don't use PARAMS.
+ * common/sim-options.h: Don't use PARAMS.
+ * common/sim-trace.c: Don't use PARAMS.
+ * common/sim-trace.h: Don't use PARAMS.
+ * common/sim-utils.h: Don't use PARAMS.
+ * cr16/cr16_sim.h: Don't use PARAMS.
+ * cr16/gencode.c: Don't use PARAMS.
+ * cr16/interp.c: Don't use PARAMS.
+ * cr16/simops.c: Don't use PARAMS.
+ * d10v/d10v_sim.h: Don't use PARAMS.
+ * d10v/gencode.c: Don't use PARAMS.
+ * d10v/interp.c: Don't use PARAMS.
+ * d10v/simops.c: Don't use PARAMS.
+ * erc32/erc32.c: Don't use PARAMS.
+ * erc32/exec.c: Don't use PARAMS.
+ * erc32/float.c: Don't use PARAMS.
+ * erc32/func.c: Don't use PARAMS.
+ * erc32/sis.c: Don't use PARAMS.
+ * erc32/sis.h: Don't use PARAMS.
+ * mips/interp.c: Don't use PARAMS.
+ * mips/sim-main.h: Don't use PARAMS.
+ * sh/interp.c: Don't use PARAMS.
+ * v850/sim-main.h: Don't use PARAMS.
+ * v850/v850_sim.h: Don't use PARAMS.
+
+2013-11-07 Will Newton <will.newton@linaro.org>
+
+ PR gdb/15508
+ * arm/wrapper.c (sim_create_inferior): Call init before
+ accessing STATE.
+
+2013-11-07 Will Newton <will.newton@linaro.org>
+
+ PR gdb/8989
+ * arm/wrapper.c (sim_create_inferior): Avoid calling
+ bfd_get_mach with a NULL bfd.
+
+2013-06-21 Nick Clifton <nickc@redhat.com>
+
+ * msp430: New Directory.
+ * configure.tgt: Add it.
+ * configure: Regenerate.
+
+2013-03-15 Steve Ellcey <sellcey@mips.com>
+
+ * arm/wrapper.c (sim_complete_command): Make char arguments const.
+ * avr/interp.c (sim_complete_command): Ditto.
+ * common/sim-options.c (sim_complete_command): Ditto.
+ * cr16/interp.c (sim_complete_command): Ditto.
+ * erc32/interf.c (sim_complete_command): Ditto.
+ * m32c/gdb-if.c (sim_complete_command): Ditto.
+ * microblaze/interp.c (sim_complete_command): Ditto.
+ * ppc/sim_calls.c (sim_complete_command): Ditto.
+ * rl78/gdb-if.c (sim_complete_command): Ditto.
+ * rx/gdb-if.c (sim_complete_command): Ditto.
+ * sh/interp.c (sim_complete_command): Ditto.
+
+2013-01-01 Joel Brobecker <brobecker@adacore.com>
+
+ Update year range in copyright notice of all files.
+
+2012-12-19 Joel Brobecker <brobecker@adacore.com>
+
+ Update old contact info in GPL license notices.
+
+2012-12-19 Joel Brobecker <brobecker@adacore.com>
+
+ Update the non-FSF-copyrighted files in sim to GPLv3 or later.
+
+2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
+
+ * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
+ condition.
+ * common/acinclude.m4: Define lt_cv_dlopen_libs.
+ * arm/configure: Regenerate.
+ * avr/configure: Regenerate.
+ * bfin/configure: Regenerate.
+ * common/configure: Regenerate.
+ * cr16/configure: Regenerate.
+ * cris/configure: Regenerate.
+ * d10v/configure: Regenerate.
+ * erc32/configure: Regenerate.
+ * frv/configure: Regenerate.
+ * h8300/configure: Regenerate.
+ * igen/configure: Regenerate.
+ * iq2000/configure: Regenerate.
+ * lm32/configure: Regenerate.
+ * m32c/configure: Regenerate.
+ * m32r/configure: Regenerate.
+ * m68hc11/configure: Regenerate.
+ * mcore/configure: Regenerate.
+ * microblaze/configure: Regenerate.
+ * mips/configure: Regenerate.
+ * mn10300/configure: Regenerate.
+ * moxie/configure: Regenerate.
+ * ppc/configure: Regenerate.
+ * rl78/configure: Regenerate.
+ * rx/configure: Regenerate.
+ * sh/configure: Regenerate.
+ * sh64/configure: Regenerate.
+ * testsuite/configure: Regenerate.
+ * v850/configure: Regenerate.
+
+2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
+
+ * MAINTAINERS: Update my email address.
+
+2012-09-24 Steve Ellcey <sellcey@mips.com>
+
+ * mips/basic.exp: Add mips*-mti-elf* target.
+ * configure.ac: Add mips*-mti-elf* target.
+ * configure: Regenerate.
+
+2012-06-15 Joel Brobecker <brobecker@adacore.com>
+
+ * configure: Regenerate.
+
+2012-06-06 Michael Eager <eager@eagercon.com>
+
+ * microblaze/interp.c (config.h): Add #include.
+
+2011-11-29 Joel Brobecker <brobecker@adacore.com>
+
+ * MAINTAINERS (Global Maintainers): New section. Add Mike
+ Frysinger.
+
+2011-11-28 DJ Delorie <dj@redhat.com>
+
+ * configure.tgt: Add rl78 support.
+ * configure: Regenerate.
+ * rl78: New directory.
+ * MAINTAINERS: Add myself as RL78 maintainer.
+
+2011-07-08 Hans-Peter Nilsson <hp@axis.com>
+
+ * MAINTAINERS: Remove Thiemo Seufer.
+
+2011-06-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
+ * configure: Regenerate.
+
+2011-05-04 Joseph Myers <joseph@codesourcery.com>
+
+ * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
+ handle targets.
+ * configure: Regenerate.
+
+2011-03-05 Mike Frysinger <vapier@gentoo.org>
+
+ * MAINTAINERS: Add bfin entry.
+ * configure.tgt (bfin-*-*): Handle bfin targets.
+ * configure: Regenerate.
+
+2011-01-05 Mike Frysinger <vapier@gentoo.org>
+
+ * .gitignore: Add /*/hw-config.h.
+
+2010-12-23 Mike Frysinger <vapier@gentoo.org>
+
+ * .gitignore: New file.
+
+2010-07-28 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Add self as RX maintainer. Sort list.
+
+2010-06-08 Nick Clifton <nickc@redhat.com>
+
+ * reg.c (set_oszc): Use unsigned int for the mask.
+ (set_szc, set_osz, set_sz): Likewise.
+
+2010-04-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Target logic moved out to and included from ...
+ * configure.tgt: ... this new file.
+ * configure: Regenerated.
+
+2010-04-12 Mike Frysinger <vapier@gentoo.org>
+
+ * README-HACKING: Add more sections.
+
+2010-02-11 Doug Evans <dje@sebabeach.org>
+
+ * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
+ * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
+ * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
+ * cris/semcrisv32f-switch.c: Regenerate.
+
+2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * avr/configure: Regenerate.
+ * cris/configure: Regenerate.
+ * microblaze/configure: Regenerate.
+
+2010-01-02 Doug Evans <dje@sebabeach.org>
+
+ * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
+ * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
+ * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
+ * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
+ * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
+ * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
+
+2010-01-01 Doug Evans <dje@sebabeach.org>
+
+ * cris/mloop.in: Fix copyright year update snafu.
+
+2009-11-24 Joel Brobecker <brobecker@adacore.com>
+
+ * common/aclocal.m4: Add include of ../../config/zlib.m4.
+ * common/common.m4: Use AM_ZLIB to check for zlib support.
+ * ppc/configure.ac: Likewise.
+ * arm/configure, avr/configure, common/configure, cr16/configure,
+ cris/configure, d10v/configure, erc32/configure, frv/configure,
+ h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
+ m32r/configure, m68hc11/configure, mcore/configure,
+ microblaze/configure, mips/configure, mn10300/configure,
+ moxie/configure, ppc/configure, sh/configure, sh64/configure,
+ v850/configure: Regenerate.
+
+2009-11-24 DJ Delorie <dj@redhat.com>
+
+ * rx: New directory.
+ * configure.ac: Add entry for Renesas RX.
+ * configure: Regenerate.
+
+2009-11-22 Doug Evans <dje@sebabeach.org>
+
+ * cris/cpuall.h: Regenerate.
+ * cris/cpuv10.h: Regenerate.
+ * cris/cpuv32.h: Regenerate.
+ * cris/decodev10.c: Regenerate.
+ * cris/decodev10.h: Regenerate.
+ * cris/decodev32.c: Regenerate.
+ * cris/decodev32.h: Regenerate.
+
+2009-11-12 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_write): Allow byte access.
+ (sim_read): Ditto.
+
+2009-11-12 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_load): Clear memory before loading.
+
+2009-11-09 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_resume): Fix typo for OP_ret.
+
+2009-10-23 Doug Evans <dje@sebabeach.org>
+
+ * cris/arch.c: Regenerate.
+ * cris/arch.h: Regenerate.
+ * cris/cpuall.h: Regenerate.
+ * cris/cpuv10.c: Regenerate.
+ * cris/cpuv10.h: Regenerate.
+ * cris/cpuv32.c: Regenerate.
+ * cris/cpuv32.h: Regenerate.
+ * cris/cris-desc.c: Regenerate.
+ * cris/cris-desc.h: Regenerate.
+ * cris/cris-opc.h: Regenerate.
+ * cris/decodev10.c: Regenerate.
+ * cris/decodev10.h: Regenerate.
+ * cris/decodev32.c: Regenerate.
+ * cris/decodev32.h: Regenerate.
+ * cris/modelv10.c: Regenerate.
+ * cris/modelv32.c: Regenerate.
+ * cris/semcrisv10f-switch.c: Regenerate.
+ * cris/semcrisv32f-switch.c: Regenerate.
+
+2009-10-22 Tristan Gingold <gingold@adacore.com>
+
+ * avr/interp.c (sim_stop): Return 1.
+
+2009-10-16 Doug Evans <dje@sebabeach.org>
+
+ * MAINTAINERS: Add myself as m32r maintainer.
+
+2009-10-15 Michael Egaer <eager@eagercon.com>
+
+ * MAINTAINERS: Add self as MicroBlaze maintainer.
+
+2009-10-14 Ben Elliston <bje@gnu.org>
+
+ * MAINTAINERS (common): Move myself to "past maintainers" section.
+
+2009-10-06 Michael Eager <eager@eagercon.com>
+
+ * microblaze/interp.c: Add include microblaze-dis.h.
+
+2009-09-23 Michael Eager <eager@eagercon.com>
+
+ * configure: Add microblaze-*.* (not regenerated).
+ * configure.ac: Likewise.
+ * microblaze/config.in: New.
+ * microblaze/configure: Generate.
+ * microblaze/configure.ac: New.
+ * microblaze/interp.c: New.
+ * microblaze/Makefile.in: New.
+ * microblaze/microblaze.h: New.
+ * microblaze/microblaze.isa: New.
+ * microblaze/sim-main.h: New.
+ * microblaze/sysdep.h: New.
+
+2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * avr/config.in: Regenerate.
+ * avr/configure: Likewise.
+ * configure: Likewise.
+ * cris/config.in: Likewise.
+ * cris/configure: Likewise.
+
+ * configure.ac: m4_include toplevel config/override.m4.
+ * configure: Regenerate.
+ * avr/configure: Regenerate.
+ * cris/configure: Regenerate.
+
+2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * Makefile.in (datarootdir): New variable.
+
+2009-05-18 Jon Beniston <jon@beniston.com>
+
+ * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
+ * configure.ac: Add lm32 target.
+ * lm32: New directory.
+
+2009-05-11 Andrew Cagney <cagney@gnu.org>
+
+ * MAINTAINERS: Orphan ppc.
+
+2009-05-08 Kevin Buettner <kevinb@redhat.com>
+
+ * m32c/gdb-if.c (m32c_signal_to_host): Rename to
+ m32c_signal_to_target. Change signal return values from SIGILL,
+ SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
+ TARGET_SIGNAL_SEGV, etc. Fix all callers.
+
+2009-04-30 Anthony Green <green@moxielogic.com>
+
+ * MAINTAINERS: Add myself for the moxie port.
+ * moxie: New directory.
+ * configure.ac: Add entry for moxie.
+ * configure: Regenerate.
+
+2009-04-27 Tristan Gingold <gingold@adacore.com>
+
+ * avr: New directory.
+ * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
+ * avr/config.in: New file, generated by autoheader.
+ * avr/configure: New file generated by autoconf.
+ * configure.ac: Add avr.
+ * configure: Regenerated.
+
+2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
+
+ * Makefile.in: Add dummy install-pdf, html, and
+ install-html targets.
+
+2009-01-18 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-if.c: Include errno.h.
+ (cris_start_address, cris_program_offset): New variables.
+ (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
+ enums.
+ (cris_options): New options --cris-program-offset and
+ --cris-start-address.
+ (cris_option_handler): Handle new options.
+ (cris_program_offset_write, cris_set_section_offset_iterator)
+ (cris_offset_sections, cris_offset_sections): New functions.
+ (sim_load): Use cris_program_offset_write as function argument to
+ cris_load_elf_file, not sim_write.
+ (struct offsetinfo): New struct.
+ (cris_handle_interpreter): Fix typo in comment.
+ (sim_open): Call cris_offset_sections as soon as the bfd of the
+ infile is available. Gate bfd validity checks on abfd non-NULL.
+ (sim_create_inferior): Let cris_start_address when != -1 override
+ other start-address choices.
+
+2009-01-06 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (abort): Define to call sim_io_error.
+ (create_map): Make -1 imply a non-fixed address, not 0. All
+ callers changed. Only prefer the next higher unmapped address if
+ the last mapped address is no less than 0x40000000. Check that
+ the address to be mapped is not already mapped. Update head
+ comment.
+ (unmap_pages): Don't call abort when recursive call fails, just
+ note and return an error if a page in the range couldn't be unmapped.
+ (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
+ (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
+ (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
+ non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
+ don't abort on page not being mapped. Handle non-anon filemap
+ with length padded to pagesize.
+
+2009-01-03 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
+ (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
+ (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
+ (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
+ (TARGET_AT_CLKTCK): Remove redundant macros.
+ (AUX_ENT): Adjust to use standard ELF AT_* macros.
+ (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
+ callers.
+ (sim_open): Also pass AT_SECURE.
+
+ * cris/sim-main.h (struct _sim_cpu): New member
+ set_target_thread_data.
+ * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
+ * cris/crisv10f.c: Ditto.
+ * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
+ (MY (f_specific_init)): Set new _sim_cpu member to new function.
+ * cris/traps.c (TARGET_SYS_set_thread_area): Define.
+ (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
+ case.
+
+ * cris/traps.c (TARGET_SYS_exit_group): Define.
+ (cris_break_13_handler): Handle it like the exit for the last
+ thread.
+
+ * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
+ (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
+ (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
+ 2.6.27. Set machine field to the BFD printable name of the
+ machine.
+
+ * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
+ (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
+ TARGET_MAP_DENYWRITE.
+
+ * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
+ (TARGET_X_OK, TARGET_F_OK): Define.
+ (cris_break_13_handler) <case TARGET_SYS_access>: New case.
+
+ * cris/semcrisv32f-switch.c: Regenerate.
+
+2008-12-30 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
+ just a short CRIS-specific notice. Tweak the wording for a
+ failing architecture test.
+
+ * cris/traps.c (TARGET_SYS_writev): New macro.
+ (is_mapped_only, cris_dump_map): New functions.
+ (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
+ and prot combinations and a non-zero page-offset. If
+ TARGET_MAP_FIXED, unmap pages before mapping them.
+ <case TARGET_SYS_mprotect>: When checking, allow any length
+ argument. Don't actually do anything.
+ <case TARGET_SYS_writev>: New case.
+
+ * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
+ * cris/sim-if.c: Include elf-bfd.h.
+ (struct progbounds): New members end_loadmem, start_nonloadmem.
+ (xprintf, eprintf): New functions, copied from common/sim-load.c.
+ (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
+ (get_progbounds_iterator): Renamed from get_progbounds. Make
+ static. Update head comment. Set new struct progbounds members.
+ (exec_load_addr, interp_load_addr, interp_start_addr): New static
+ variables.
+ (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
+ (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
+ functions.
+ (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
+ handling to use auxv_entries. Improve error message and checking
+ for invalid programs. Use new variable abfd for the program
+ instead of for each access reaching into sd to get it.
+ (sim_create_inferior): If non-zero, use interp_start_addr instead
+ of the program start address.
+ (cris_disassemble_insn): Remove incorrect and unclear, supposedly
+ stale comment. Always specify little-endian.
+
+2008-07-29 Nick Clifton <nickc@redhat.com>
+
+ * common/genmloop.sh: Add new parameter: -shell to specify the
+ command interpreter to use to run the input file. This is
+ necessary because otherwise SHELL is taken from the user's
+ environment, and not from the makefile that invoked this script
+ and the user might not be running an sh-like shell.
+ * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
+ * fr30/Makefile.in: Likewise.
+ * frv/Makefile.in: Likewise.
+ * i960/Makefile.in: Likewise.
+ * iq2000/Makefile.in: Likewise.
+ * m32r/Makefile.in: Likewise.
+
+ * frv/mloop.in: Add missing start of line comment marker.
+
+2008-07-11 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/configure: Regenerate to track ../common/common.m4 changes.
+ * cris/config.in: Ditto.
+
+2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+ Joseph Myers <joseph@codesourcery.com>
+
+ * cris/configure: Regenerate.
+
+2008-05-09 Olivier Hainque <hainque@adacore.com>
+
+ * ppc/altivec.igen (vperm): Latch inputs into temporaries.
+
+2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+ * MAINTAINERS: Add myself as maintainer of cr16 port.
+
+2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
+
+ Add simulator for National cr16 processor.
+ * cr16: New directory.
+ * configure.ac: Add entry for National cr16.
+ * configure: Regenerate.
+
+2008-02-05 DJ Delorie <dj@redhat.com>
+
+ * configure.ac (v850): V850 now has a testsuite.
+ * configure (v850): Likewise.
+
+2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
+
+ Updated copyright notices for most files.
+
+2007-12-19 DJ Delorie <dj@redhat.com>
+
+ * frv/frv.c (frvbf_cut): Only look at the six LSBs of
+ cut_point.
+
+2007-10-22 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
+ cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
+ cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
+ cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
+ cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
+ cris/semcrisv32f-switch.c: Regenerate.
+
+2007-08-24 Joel Brobecker <brobecker@adacore.com>
+
+ Switch the license of all files explicitly copyright the FSF
+ to GPLv3.
+
+2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
+
+ * Makefile.in: Add dummy "pdf" target.
+
+2007-02-20 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (dump_statistics): Change format for cycle numbers
+ to %llu and cast parameters to unsigned long long.
+
+2007-02-16 Thiemo Seufer <ths@mips.com>
+
+ * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
+
+2007-01-28 Manuel Lauss <slauss@resi.at>
+
+ * configure.ac (sh64-*-*): Change to sh64*-*-*.
+ (sh-*-*): Change to sh*-*-*.
+ * configure: Regenerated.
+
+2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
+
+ Updated copyright notices for most files.
+
+2006-12-20 Hans-Peter Nilsson <hp@axis.com>
+
+ * Makefile.in (autoconf-common autoheader-common): Only run
+ autoheader on subdirs with a file config.in.
+
+ * configure.ac (common): Make the default "yes" for all targets
+ with sim subdirs.
+ * configure: Regenerate.
+
+ * Makefile.in (autoconf-common autoheader-common): In documented
+ usage, say SHELL=/bin/sh.
+ (.PHONY): Add autoheader-common.
+
+ * MAINTAINERS: Add self as authorized committer for *.
+
+2006-10-02 Edgar E. Iglesias <edgar@axis.com>
+ Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
+ (cris_unknown_syscall_action): Declare.
+ * cris/sim-if.c (cris_unknown_syscall_action): Define.
+ (cris_options): Add cris-unknown-syscall option.
+ (cris_option_handler): Correct comment about and error message for
+ invalid --cris-cycles argument. Handle --cris-unknown-syscall.
+ * cris/traps.c: Include stdarg.h
+ (cris_unknown_syscall): New function.
+ (cris_break_13_handler): Instead of sim_io_eprintf and
+ sim_engine_halt, call cris_unknown_syscall to handle more or less
+ unknown syscalls. Adjust code as necessary to handle return
+ value.
+
+2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * MAINTAINERS: Add Dave Brolley for sh64.
+
+2006-09-30 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (TARGET_PIPE_BUF): New macro.
+ (cris_pipe_empty): Correct initialization of "remaining". Only
+ adjust the "write" return value if more than TARGET_PIPE_BUF bytes
+ are written.
+
+2006-09-29 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/configure.ac: Check for limits.h and sys/param.h.
+ * cris/configure, cris/config.in: Rebuild.
+ * cris/traps.c (SIM_PATHMAX): New macro.
+ (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
+
+2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
+ * Makefile.in (FLAGS_TO_PASS): Include libdir.
+ * configure: Regenerated.
+
+2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * cris/configure: Regenerated.
+
+2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * cris/configure: Regenerated.
+
+2006-05-05 Andreas Schwab <schwab@suse.de>
+
+ * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
+ * configure: Regenerate.
+
+ * Makefile.in (CFLAGS_FOR_BUILD): Define.
+ (CC_FOR_BUILD): Don't override.
+ (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
+
+2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * MAINTAINERS: Add an "Authorized committers" section, and list
+ DJ Delorie for v850.
+
+2006-04-08 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
+
+2006-04-03 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
+ * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
+ (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
+ (all): Depend on rvdummy$(EXEEXT).
+ * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
+ sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
+ default off.
+ * cris/configure: Regenerate.
+ * cris/cris-sim.h (cris_have_900000xxif): Declare here.
+ (enum cris_interrupt_type, crisv10deliver_interrupt)
+ (crisv32deliver_interrupt: New declarations.
+ * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
+ sim_events_tickn and set state-events member work_pending when it's
+ time for the next event.
+ [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
+ interrupt-delivery function.
+ * cris/crisv10f.c (MY (deliver_interrupt)): New function.
+ * cris/crisv32f.c (MY (deliver_interrupt)): New function.
+ * cris/devices.c: Include hw-device.h.
+ (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
+ (device_io_write_buffer): Only perform 0x900000xx-functions if
+ cris_have_900000xxif is nonzero. Else if WITH_HW defined,
+ call hw_io_write_buffer. Add return 0 last in function.
+ * cris/sim-if.c (cris_have_900000xxif): Now global.
+ (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
+ Force "-model" option, effectively.
+ * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
+ (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
+
+2006-04-02 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
+ (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
+ (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
+
+2006-03-13 DJ Delorie <dj@redhat.com>
+
+ * MAINTAINERS: Add self as m32c sim maintainer.
+
+2006-02-23 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
+ mapping.
+ (cris_break_13_handler) <case TARGET_SYS_time>: New case.
+
+2006-01-23 Jim Blandy <jimb@redhat.com>
+
+ Add simulator for Renesas M32C and M16C.
+
+ * m32c: New directory.
+ * configure.ac: Add entry for Renesas M32C.
+ * configure: Regenerate.
+
+2006-01-10 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
+ cycle count for the current insn.
+
+2005-12-06 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
+ cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
+ cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
+ cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
+
+2005-12-05 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
+ cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
+ cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
+ cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
+ cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
+ cris/semcrisv32f-switch.c: Regenerate.
+
+2005-11-20 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
+ (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
+ TARGET_O_WRONLY.
+ (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
+ F_GETFL on fd 0, 1 and 2.
+
+2005-11-17 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
+ last_open_fd, last_open_flags.
+ * cris/traps.c: Don't include targ-vals.h.
+ (TARGET_O_ACCMODE): Define.
+ (cris_break_13_handler): Set new _sim_cpu members.
+ <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
+ Rearrange code as switch. Emit "unimplemented" abort for
+ unimplemented fcntl calls.
+
+ * cris/traps.c (TARGET_SYS_stat): Define.
+ (syscall_stat32_map): Add entry for TARGET_SYS_stat.
+ (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
+
+2005-11-16 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
+ low 32 bits are used after an unsigned long cast.
+
+2005-05-28 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
+
+2005-05-26 Chris Demetriou <cgd@netbsd.org>
+
+ * MAINTAINERS: Update my mail address, move myself to the
+ "Past maintainers" section.
+
+2005-05-17 Corinna Vinschen <vinschen@redhat.com>
+
+ * configure.ac: Add igen to v850 build.
+ * configure: Regenerate.
+
+2005-04-29 Paul Brook <paul@codesourcery.com>
+
+ * common/callback.c (PIPE_BUF): Provide default definition.
+ (os_lstat): Use stat if lstat is not available on the host.
+ (os_ftruncate): Return EINVAL if not available on the host.
+ (os_truncate): Ditto.
+ * common/configure.ac: Check for lstat, truncate and ftruncate.
+ * common/configure: Regenerate.
+ * common/config.in: Regenerate.
+
+2005-04-27 Paul Brook <paul@codesourcery.com>
+
+ * common/Make-common.in: Add $(EXEEXT) to "run".
+
+2005-04-18 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
+ For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
+ implemented. In call to create_map, pad length argument to 8k.
+
+2005-04-15 Corinna Vinschen <vinschen@redhat.com>
+
+ * configure.ac: Add explicit sh64 case.
+ * configure: Regenerate.
+
+2005-03-30 Paul Brook <paul@codesourcery.com>
+
+ * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
+
+2005-03-24 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
+ include cgen-ops.h in decodev10.c and decodev32.c.
+ * cris/sim-main.h: Don't include cgen-ops.h here.
+ * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
+ cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
+ cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
+ cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
+ cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
+ cris/semcrisv32f-switch.c: Regenerate.
+
+ * cris/traps.c (cris_break_13_handler) <case
+ TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
+ sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
+
+2005-03-23 Mark Kettenis <kettenis@gnu.org>
+
+ * cris/configure: Regenerate.
+
+2005-02-28 Jim Blandy <jimb@redhat.com>
+
+ * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
+ mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
+ Regenerated, after change to common/aclocal.m4.
+
+2005-02-18 Corinna Vinschen <vinschen@redhat.com>
+
+ * iq2000: New target subdirectory.
+ * configure.ac: Add iq2000 target.
+ * configure: Regenerate.
+
+2005-01-29 Hans-Peter Nilsson <hp@axis.com>
+
+ * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
+ (realclean, install): Fail if subdir make failed.
+
+2005-01-28 Hans-Peter Nilsson <hp@axis.com>
+
+ * cris: New directory, simulator for Axis Communications CRIS
+ including CRIS v32, CGEN-based.
+ * configure.ac: Add corresponding configury.
+ * configure: Regenerate.
+
+2005-01-17 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: For mips*-*-* and mn10300*-*-* configure the
+ common directory. Remove sparc*-*-* from list.
+
+2005-01-11 Andrew Cagney <cagney@gnu.org>
+
+ * Makefile.in (autoconf-common autoheader-common): Add --force to
+ autoconf and autoheader.
+ (autoconf-common autoheader-common)
+ (autoconf-install autoheader-install): Check for configure.ac, not
+ configure.in.
+ * configure.ac: Delete AC_CONFIG_AUX_DIR.
+ * configure: Re-generate.
+
+2005-01-07 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Replace configure.in. Requires autoconf 2.59 and
+ correctly calls AC_CONFIG_SUBDIRS.
+ * configure: Re-generate.
+
+2004-12-01 Andrew Cagney <cagney@gnu.org>
+
+ * i960, h8500: Delete directory.
+
+2004-11-12 Andrew Cagney <cagney@gnu.org>
+
+ * d30v, fr30, mn10200, z8k: Delete directory.
+
+2004-03-10 Ben Elliston <bje@gnu.org>
+
+ * MAINTAINERS: Update my mail address.
+
+2004-01-26 Chris Demetriou <cgd@broadcom.com>
+
+ * configure.in (mips*-*-*): Configure in testsuite.
+ * configure: Regenerate.
+
+2003-10-08 Dave Brolley <brolley@redhat.com>
+
+ * configure.in: Move frv handling to alphabetically correct placement.
+
+2003-09-03 Andreas Schwab <schwab@suse.de>
+
+ * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
+
+2003-08-29 Dave Brolley <brolley@redhat.com>
+
+ * MAINTAINERS: Add myself as maintainer of the FRV port.
+
+2003-08-20 Michael Snyder <msnyder@redhat.com>
+ Dave Brolley <brolley@redhat.com>
+
+ * frv/: New directory, simulator for the Fujitsu FRV.
+ * configure.in: Add frv configury.
+ * configure: Regenerate.
+
+2003-08-10 Ben Elliston <bje@wasabisystems.com>
+
+ * MAINTAINERS: Update my mail address.
+
+2003-08-09 Andrew Cagney <cagney@redhat.com>
+
+ * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
+ maintenance. List igen and sh maintainers. Mention that target
+ and global maintainers pick up the slack.
+
+2003-07-09 Michael Snyder <msnyder@redhat.com>
+
+ * configure.in: Add testsuite to extra_subdirs for sh.
+ * configure: Regenerate.
+
+2003-01-23 Nick Clifton <nickc@redhat.com>
+
+ * Add sh2e support:
+
+2002-04-02 Alexandre Oliva <aoliva@redhat.com>
+
+ * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
+
+2002-08-24 Geoffrey Keating <geoffk@redhat.com>
+
+ * MAINTAINERS: Update my email address.
+
+2002-07-17 Andrew Cagney <ac131313@redhat.com>
+
+ * w65/: Delete directory.
+
+2002-07-16 Andrew Cagney <ac131313@redhat.com>
+
+ * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
+ * configure: Re-generate.
+
+2002-07-13 Andrew Cagney <ac131313@redhat.com>
+
+ * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
+ * configure: Re-generate.
+
+2002-06-16 Andrew Cagney <ac131313@redhat.com>
+
+ * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
+ id, date and host to be overriden by NAME, ID, DATE and HOST
+ respectfully. Use ISO dates.
+
+Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
+
+ * Makefile.in (ChangeLog): New makefile variable.
+ * README-HACKING: Mention the ChangeLog makefile variable.
+
+2002-06-01 Andrew Cagney <ac131313@redhat.com>
+
+ * tic80/: Delete directory.
+
+2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
+
+ * MAINTAINERS: Update my email address.
+
+2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
+
+2002-03-01 Frank Ch. Eigler <fche@redhat.com>
+
+ * MAINTAINERS: Record self as a co-maintainer of just common/.
+
+2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * MAINTAINERS: Point to GDB files describing overall maintaince
+ and check-in procedures.
+
+2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * MAINTAINERS: Add myself for ARM portions.
+
+2001-10-19 Andrew Cagney <ac131313@redhat.com>
+
+ * configure.in: When Linux or NetBSD, enable PowerPC simulator.
+ * configure: Re-generate.
+
+2001-02-16 Ben Elliston <bje@redhat.com>
+
+ * MAINTAINERS: Add myself for common portions.
+
+2001-01-15 Chris Demetriou <cgd@broadcom.com>
+
+ * MAINTAINERS: Added self and Andrew for the mips sim.
+
+2000-10-25 Geoff Keating <geoffk@cygnus.com>
+
+ * MAINTAINERS: Added self and Andrew for the ppc sim.
+
+Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
+ * m68hc11: New directory.
+ * configure.in: Add.
+ * configure: Regenerate.
+
+Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * tic80: New directory.
+ * configure.in: Add configury.
+ * configure: Regenerate.
+
+2000-04-20 Nick Clifton <nickc@cygnus.com>
+
+ * configure.in (extra_subdirs): Add testsuite to strongarm
+ directories.
+ * configure: Regenerate.
+
+Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * MAINTAINERS: New file. Blank.
+
+1999-11-18 Ben Elliston <bje@cygnus.com>
+
+ * configure.in: Require autoconf 2.13 and remove obsolete
+ invocation of AC_C_CROSS.
+ * configure: Regenerate.
+
+1999-09-29 Doug Evans <devans@casey.cygnus.com>
+
+ * configure.in: Configure the testsuite directory for thumb.
+ * configure: Regenerate.
+
+1999-07-16 Ben Elliston <bje@cygnus.com>
+
+ * configure.in: Configure the testsuite directory for arm.
+ * configure: Regenerate.
+
+1999-04-08 Nick Clifton <nickc@cygnus.com>
+
+ * configure.in: Add support for MCore target.
+ * configure: Regenerate.
+
+1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
+
+ * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
+ RUNTEST instead of commenting out, fixes portability problem.
+
+1999-02-08 Nick Clifton <nickc@cygnus.com>
+
+ * configure.in: Add support for StrongARM target.
+ * configure: Regenerate.
+
+1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
+
+ * configure.in: Require autoconf 2.12.1 or higher.
+
+1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
+
+ * configure.in (i960-*-*): Add.
+ * configure: Rebuild.
+
+Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
+
+ * configure.in: Added case for fr30-*-*.
+ * configure: Regenerated.
+
+Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
+
+ * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
+ to allow successful operation on Windows.
+
+Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
+
+ * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
+ check can be invoked recursively.
+
+Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
+
+ * configure.in: Build simulator on sparclite and sparc86x targets.
+ * configure: Regenerate.
+
+Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (autoconf-common autoheader-common): Don't pass -l
+ to autoconf and autoheader.
+
+Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
+
+ * Makefile.in (autoconf-common autoheader-common): Pass `-l
+ ../common' to autoconf and autoheader. Unconditionally run
+ autoconf in every subdir.
+ (autoconf-changelog autoheader-changelog): Unconditionally run
+ commands in every subdir.
+ (autoconf-install autoheader-install): Likewise.
+
+Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
+
+ * Makefile.in: Get SHELL from configure.
+ * (FLAGS_TO_PASS): Pass down SHELL.
+ * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
+ NT native builds.
+
+Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
+
+ * configure.in (extra_subdirs): Enable igen for mn10300.
+ * configure: Re-generate.
+
+Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
+
+ * configure.in (extra_subdirs): Add support for thumb target.
+
+ * configure (extra_subdirs): Add support for thumb target.
+
+Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (extra_subdirs): Add IGEN directory when MIPS
+ target.
+ * configure: Regenerate.
+
+Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (extra_subdirs): v850ea needs igen.
+ * configure: Re-generate.
+
+Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (testdir): When a testsuite directory, add that to
+ the list of confdirs.
+
+Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (extra_subdirs): Enable igen ready for V850.
+
+Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (w65-*-*, only_if_enabled): Set.
+ * configure: Re-generate.
+
+Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (sparc*-*-*, only_if_enabled): Set
+ only_if_enabled=yes. Check only_if_enabled before enabling a
+ simulator.
+ * configure: Regenerate.
+
+Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
+
+ * configure.in (extra_subdirs): Add v850e target.
+
+Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
+
+ * configure.in (extra_subdirs): Add v850ea target.
+
+Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in (sparc*-*-*): Don't build erc32.
+ * configure: Regenerate.
+
+Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in (m32r-*-*): New target.
+ * configure: Regenerate.
+
+ * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
+
+Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
+ thought that .NOEXPORT was the default target.
+
+Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (clean mostlyclean): Restore targets accidentally
+ deleted in earlier change.
+
+Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * Makefile.in (autoheader-common, autoheader-changelog,
+ autoheader-install): Perform autoheader in addition to autoconf.
+
+Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (autoconf-install): New target.
+ (autoconf-changelog): Try different way to obtain user name.
+
+Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * Makefile.in (autoconf-changelog): New target, update
+ ChangeLog for all subdirectories - normally used after
+ autoconf-common target.
+
+Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
+
+ * configure.in (extra_subdirs): Include testsuite for d30v.
+ * configure: Regenerate.
+
+ * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
+ ../gdb/Makefile.in
+ (check): New rules - drive the testsuite.
+
+Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
+
+ * configure.in: Add mn10200 configure lines accidentally
+ removed.
+ * configure: Regenerated.
+
+Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
+
+ * configure.in (extra_subdirs): Generalize common sub directory
+ into a list.
+ (extra_subdirs): For d30v add igen to the list to be built.
+
+Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
+
+ * configure.in (d30v): New target.
+ * configure: Regenerated.
+
+Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
+
+ * configure.in: Don't require GCC to build the mn10200
+ simulator anymore.
+ * configure: Rebuilt.
+
+Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in: Don't configure any subdirs if no simulator
+ is being built. Don't use erc32 for sparc64.
+ * configure: Regenerated.
+
+Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.in (autoconf-common): New target.
+ * configure.in: Do configure common.
+ * configure: Regenerated.
+
+Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * configure configure.in: Don't configure common anymore. Files
+ from common are now built in the individual simualtor directories.
+ This fixes problems with the WinGDB build procedure.
+
+Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
+
+ * configure: Enable the mn10200 simulator.
+
+Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in (configdirs): Add common.
+ * configure: Regenerated.
+
+Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (powerpc*-*-linux*): Treat like the other powerpc
+ system V based targets.
+ * configure: Regenerate.
+
+Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in (--enable-sim-powerpc): Delete.
+ (--enable-sim): Add.
+ * configure: Regenerated.
+
+Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
+
+ * configure.in: Only build the V850 simulator if
+ we are using gcc.
+ * configure: Rebuild.
+
+Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Do build erc32 for DOS and Windows hosts.
+ * configure: Rebuild.
+
+Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
+
+ * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
+ be inherited from the parent. Remove INSTALL_XFORM and
+ INSTALL_XFORM1. Make INSTALL be set from configure.
+
+Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Only build the MIPS simulator if we are using
+ gcc.
+ * configure: Rebuild.
+
+Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
+
+ * configure.in (v850-*-*): Added V850 simulator.
+
+Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * configure.in (d10v-*-*): Added D10V simulator.
+
+Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
+ INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
+ (docdir): Removed.
+ * configure.in (AC_PREREQ): autoconf 2.5 or higher.
+ (AC_PROG_INSTALL): Added.
+ * configure: Rebuilt.
+
+Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Only configure erc32 if using gcc.
+ * configure: Rebuild.
+
+Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (sim_target): Build PowerPC simulator for powerpc
+ System V.4, Solaris, and Elf targets.
+ * configure: Regenerate with autoconf 2.10.
+
+Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
+
+ * configure.in: Only built erc32 simulator on Unix hosts as it
+ uses pseudo ttys.
+ * configure: Regenerated with autoconf 2.8.
+
+Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
+
+ * erc32: Sparc simulator from the ESA.
+
+Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
+
+ From: Miles Bader <miles@gnu.ai.mit.edu>
+ * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
+ * configure: Regenerate using autoconf.
+
+Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in (install): Fix typo.
+
+Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure: Regenerate with autoconf 2.7.
+
+ * Makefile.in (all): Simplify.
+ (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
+ as in the all target.
+ (distclean, maintainer-clean, realclean): Likewise.
+ (install): Likewise.
+
+Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (all): Remove extra '\' char from shell script.
+
+Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in (all): Avoid a for loop with zero elements, even if
+ the loop will not be executed because of an if statement.
+
+Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (install): Add missing semicolon in "fi \".
+
+Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
+ defaults from configure.
+
+ * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
+ configure defaults.
+ (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
+ if either --enable-sim-powerpc is used, or the host compiler is
+ GCC.
+
+Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
+
+ * configure.in (mips*-*-*): Added "mips" simulator target.
+ * configure: Re-generated.
+
+Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (BISON): Remove macro.
+ (FLAGS_TO_PASS): Remove BISON.
+
+Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+ * configure.in: Explicitly `exit 0' for broken shells.
+ * configure: Rebuilt.
+
+Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
+
+ * common/run.c (main): Initialize the callbacks.
+
+Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.in (maintainer-clean): New synonym for realclean.
+
+Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (powerpc*-*-eabisim*): Only build the simulator if
+ the target is powerpc*-*-eabisim*, since it requires GCC to build.
+
+Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
+
+ * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
+ <cagney@highland.com.au>.
+ * configure: Regnerate from configure.in.
+
+Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
+
+ * Update all FSF addresses except those in COPYING* files.
+
+Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
+
+ * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
+ submakes either default or passed in value.
+
+Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
+
+ * Makefile.in (all, clean, distclean, mostlyclean, realclean,
+ install): Changed targets so that they descend all
+ subdirectories in $(SUBDIRS).
+ (*-all, *-clean, *-install): Removed targets.
+
+ * configure.in: Don't bother with target makefile fragments, they
+ are no longer needed.
+ * configure: regenerated.
+
+ * Makefile.in, configure.in: converted to autoconf.
+ * configure: New file, generated with autconf 2.4.
+
+Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
+
+ * Makefile.in: Support ARM.
+ * configure.in: Ditto.
+
+Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
+
+ * Makefile.in: Support W65.
+ * configure.in: Ditto.
+
+Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * Makefile.in: Add TAGS target.
+
+Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
+
+ * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
+ install-h8300, clean-h8300, all-h8500, install-h8500,
+ clean-h8500, all-sh, install-sh, clean-sh): do not echo
+ recursion lines.
+
+Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
+
+ * Makefile.in: remove endian.h trace from h8500
+
+Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
+
+ * Makefile.in: Add distclean, realclean, and mostlyclean targets.
+
+Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
+
+ * Makefile.in: make all of the all-* target (except all-nothing)
+ depend on endian.h, so that if we're not building a simulator, we
+ don't built endian
+
+Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * Makefile.in (check, installcheck): Added dummy targets.
+
+Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
+
+ * Makefile.in (endian): Find endian.c in $(srcdir), and also
+ explicitly make it, since some makes apparently don't work with
+ VPATH and .c to executable rules (SunOS make for example).
+
+Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
+
+ * Makefile.in (endian): Add explicit rule for broken makes.
+
+Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * Makefile.in (info, install-info): New targets.
+ (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
+ level Makefile.
+
+Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
+
+ * Makefile.in (endian.h): build endian.h via a temporary file so
+ that we don't leave an incomplete file lying around on
+ interrupted builds.
+ (clean): remove endian, e.h, and endian.h.
+
+Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
+
+ * Makefile.in, configure.in: if target isn't supported, build a
+ harmless makefile.
+
+
2014-08-19 Alan Modra <amodra@gmail.com>
* configure.ac: Invoke AC_PLUGINS.
@@ -3978,7 +5497,7 @@ Wed Jan 17 19:46:07 1996 Andrew Cagney <cagney@highland.com.au>
device tree load from file code.
* psim.c (psim_create): Dump device tree if enabled. If nump
- selected, exit psim immediatly.
+ selected, exit psim immediately.
Wed Jan 17 19:36:52 1996 Andrew Cagney <cagney@highland.com.au>
diff --git a/sim/ppc/ChangeLog.00 b/sim/ppc/ChangeLog.00
index 8b8be82..9f6612f 100644
--- a/sim/ppc/ChangeLog.00
+++ b/sim/ppc/ChangeLog.00
@@ -505,7 +505,7 @@ Mon Dec 4 17:12:13 1995 Andrew Cagney <cagney@highland.com.au>
* sim-endian.h,c (SIM_ENDIAN_INLINE) bits.h,c (BITS_INLINE):
Change to use the updated inline definitions. If enabled
- immediatly include the corresponding c-code so that it will inline
+ immediately include the corresponding c-code so that it will inline
for all modules.
* inline.h, inline.c (SIM_ENDIAN_INLINE, BITS_INLINE): Remove
diff --git a/sim/ppc/hw_com.c b/sim/ppc/hw_com.c
index 648c4df..38d6d85 100644
--- a/sim/ppc/hw_com.c
+++ b/sim/ppc/hw_com.c
@@ -103,14 +103,14 @@
input-buffering = "unbuffered" (optional)
Specifying "unbuffered" buffering disables buffering on the serial
- devices input stream (all data is immediatly read). In the future,
+ devices input stream (all data is immediately read). In the future,
this option may be used to provide input buffering alternatives.
output-buffering = "unbuffered" (optional)
Specifying "unbuffered" buffering disables buffering on the serial
- devices output stream (all data is immediatly written). In the future,
+ devices output stream (all data is immediately written). In the future,
this option may be extended to include other buffering alternatives.
diff --git a/sim/ppc/ld-cache.h b/sim/ppc/ld-cache.h
index 241a652..9662bd1 100644
--- a/sim/ppc/ld-cache.h
+++ b/sim/ppc/ld-cache.h
@@ -24,7 +24,7 @@
The table that follows determines how each field should be treated.
Importantly it considers the case where the extracted field is to
- be used immediatly or stored in an instruction cache.
+ be used immediately or stored in an instruction cache.
<type>
diff --git a/sim/ppc/ppc-instructions b/sim/ppc/ppc-instructions
index 1b8fd89..1a2e51a 100644
--- a/sim/ppc/ppc-instructions
+++ b/sim/ppc/ppc-instructions
@@ -3355,7 +3355,7 @@ void::function::invalid_zero_divide_operation:cpu *processor, unsigned_word cia,
spreg new_val = (spr_length(n) == 64
? *rS
: MASKED(*rS, 32, 63));
- /* HACK - time base registers need to be updated immediatly */
+ /* HACK - time base registers need to be updated immediately */
if (WITH_TIME_BASE) {
switch (n) {
case spr_tbu:
--
1.9.3