This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH 3/9] New commands `enable probe' and `disable probe'.
- From: Sergio Durigan Junior <sergiodj at redhat dot com>
- To: "Jose E. Marchesi" <jose dot marchesi at oracle dot com>
- Cc: gdb-patches at sourceware dot org
- Date: Tue, 30 Sep 2014 19:13:09 -0400
- Subject: Re: [PATCH 3/9] New commands `enable probe' and `disable probe'.
- Authentication-results: sourceware.org; auth=none
- References: <1411724905-31234-1-git-send-email-jose dot marchesi at oracle dot com> <1411724905-31234-4-git-send-email-jose dot marchesi at oracle dot com>
On Friday, September 26 2014, Jose E. Marchesi wrote:
> This patch adds the above-mentioned commands to the generic probe abstraction
> implemented in probe.[ch]. The effects associated to enabling or disabling a
> probe depend on the type of probe being handled, and is triggered by invoking
> two back-end hooks in `probe_ops'.
>
> In case some particular probe type does not support the notion of enabling
> and/or disabling, the corresponding fields on `probe_ops' can be initialized
> to NULL. This is the case of SystemTap probes.
Thanks for the patch, Jose. Comments below, as usual.
> gdb:
>
> 2014-09-26 Jose E. Marchesi <jose.marchesi@oracle.com>
>
> * stap-probe.c (stap_probe_ops): Add NULLs in the static
> stap_probe_ops for `enable_probe' and `disable_probe'.
>
> * probe.c (enable_probes_command): New function.
> (disable_probes_command): Likewise.
> (_initialize_probe): Define the cli commands `enable probe' and
> `disable probe'.
>
> * probe.h (probe_ops): New hooks `enable_probe' and
> `disable_probe'.
Same comment about blank lines in the ChangeLog entry applies here.
> gdb/doc:
>
> 2014-09-26 Jose E. Marchesi <jose.marchesi@oracle.com>
>
> * gdb.texinfo (Static Probe Points): Cover the `enable probe' and
> `disable probe' commands.
> ---
> gdb/ChangeLog | 13 ++++++
> gdb/doc/ChangeLog | 5 +++
> gdb/doc/gdb.texinfo | 30 +++++++++++++
> gdb/probe.c | 123 +++++++++++++++++++++++++++++++++++++++++++++++++++
> gdb/probe.h | 12 +++++
> gdb/stap-probe.c | 2 +
> 6 files changed, 185 insertions(+)
>
> diff --git a/gdb/ChangeLog b/gdb/ChangeLog
> index 5ec0d85..2f94e05 100644
> --- a/gdb/ChangeLog
> +++ b/gdb/ChangeLog
> @@ -1,5 +1,18 @@
> 2014-09-26 Jose E. Marchesi <jose.marchesi@oracle.com>
>
> + * stap-probe.c (stap_probe_ops): Add NULLs in the static
> + stap_probe_ops for `enable_probe' and `disable_probe'.
> +
> + * probe.c (enable_probes_command): New function.
> + (disable_probes_command): Likewise.
> + (_initialize_probe): Define the cli commands `enable probe' and
> + `disable probe'.
> +
> + * probe.h (probe_ops): New hooks `enable_probe' and
> + `disable_probe'.
> +
> +2014-09-26 Jose E. Marchesi <jose.marchesi@oracle.com>
> +
> * probe.c (compute_probe_arg): Function moved from the probe
> backends.
> (compile_probe_arg): Likewise.
> diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
> index 9a4bc09..5667bf1 100644
> --- a/gdb/doc/ChangeLog
> +++ b/gdb/doc/ChangeLog
> @@ -1,3 +1,8 @@
> +2014-09-26 Jose E. Marchesi <jose.marchesi@oracle.com>
> +
> + * gdb.texinfo (Static Probe Points): Cover the `enable probe' and
> + `disable probe' commands.
> +
> 2014-09-22 Jan-Benedict Glaw <jbglaw@lug-owl.de>
>
> * gdb.texinfo (Set Breaks): Add missing "@end table".
> diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
> index 026706a..4d6dfbc 100644
> --- a/gdb/doc/gdb.texinfo
> +++ b/gdb/doc/gdb.texinfo
> @@ -4976,6 +4976,36 @@ given, all object files are considered.
> List the available static probes, from all types.
> @end table
>
> +@cindex enabling and disabling probes
> +Some probe points can be enabled and/or disabled. The effects
> +associated to enabling or disabling a probe depend on the type of
> +probe being handled. @code{SystemTap} probes do not support these
> +notions.
> +
> +You can enable (or disable) one or more probes using the following
> +commands, with optional arguments:
> +
> +@table @code
> +@kindex enable probes
> +@item enable probes @r{[}@var{provider} @r{[}@var{name} @r{[}@var{objfile}@r{]}@r{]}@r{]}
> +If given, @var{provider} is a regular expression used to match against
> +provider names when selecting which probes to enable. If omitted,
> +probes by all probes from all providers are enabled.
> +
> +If given, @var{name} is a regular expression to match against probe
> +names when selecting which probes to enable. If omitted, probe names
> +are not considered when deciding whether to enable them.
> +
> +If given, @var{objfile} is a regular expression used to select which
> +object files (executable or shared libraries) to examine. If not
> +given, all object files are considered.
> +
> +@kindex disable probes
> +@item disable probes @r{[}@var{provider} @r{[}@var{name} @r{[}@var{objfile}@r{]}@r{]}@r{]}
> +See the @code{enable probes} command above for a description of the
> +optional arguments accepted by this command.
> +@end table
> +
> @vindex $_probe_arg@r{, convenience variable}
> A probe may specify up to twelve arguments. These are available at the
> point at which the probe is defined---that is, when the current PC is
> diff --git a/gdb/probe.c b/gdb/probe.c
> index d218f00..1e5c460 100644
> --- a/gdb/probe.c
> +++ b/gdb/probe.c
> @@ -685,6 +685,106 @@ info_probes_command (char *arg, int from_tty)
> info_probes_for_ops (arg, from_tty, NULL);
> }
>
> +/* Implementation of the `enable probes' command. */
> +
> +static void
> +enable_probes_command (char *arg, int from_tty)
> +{
> + char *provider, *probe_name = NULL, *objname = NULL;
> + struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
> + VEC (bound_probe_s) *probes;
> + struct bound_probe *probe;
> + int i;
> +
> + /* Do we have a `provider:probe:objfile' style of linespec? */
> + provider = extract_arg (&arg);
> + if (provider)
> + {
> + make_cleanup (xfree, provider);
> +
> + probe_name = extract_arg (&arg);
> + if (probe_name)
> + {
> + make_cleanup (xfree, probe_name);
> +
> + objname = extract_arg (&arg);
> + if (objname)
> + make_cleanup (xfree, objname);
> + }
> + }
This construct has become useful enough that it can be put in a
function, probably. Would you mind doing that?
> + probes = collect_probes (objname, provider, probe_name, NULL /* pops */);
When I code, I try not to put comments inside the parentheses. You can
put a comment above the function, or just remove it at all (there is
another call to collect_probes that doesn't have a comment).
> + if (VEC_empty (bound_probe_s, probes))
> + {
> + ui_out_message (current_uiout, 0, _("No probes matched.\n"));
> + return;
> + }
You should call do_cleanups before returning here (and in other places).
> + /* Enable the selected probes, provided their backends support the
> + notion of enabling a probe. */
> + for (i = 0; VEC_iterate (bound_probe_s, probes, i, probe); ++i)
> + {
> + const struct probe_ops *pops = probe->probe->pops;
> + if (pops->enable_probe)
Newline between variable declaration and code. You are also comparing
things implicitly, and we do it explicitly:
if (pops->enable_probe != NULL)
> + {
> + pops->enable_probe (probe->probe);
> + ui_out_message (current_uiout, 0,
> + _("Probe %s:%s enabled.\n"),
> + probe->probe->provider, probe->probe->name);
> + }
> + }
I would appreciate a warning here if pops->enable_probe == NULL, saying
that the probe cannot be enabled/disabled.
> +}
> +
> +/* Implementation of the `disable probes' command. */
> +
> +static void
> +disable_probes_command (char *arg, int from_tty)
> +{
> + char *provider, *probe_name = NULL, *objname = NULL;
> + struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
> + VEC (bound_probe_s) *probes;
> + struct bound_probe *probe;
> + int i;
> +
> + /* Do we have a `provider:probe:objfile' style of linespec? */
> + provider = extract_arg (&arg);
> + if (provider)
> + {
> + make_cleanup (xfree, provider);
> +
> + probe_name = extract_arg (&arg);
> + if (probe_name)
> + {
> + make_cleanup (xfree, probe_name);
> +
> + objname = extract_arg (&arg);
> + if (objname)
> + make_cleanup (xfree, objname);
> + }
> + }
> +
> + probes = collect_probes (objname, provider, probe_name, NULL /* pops */);
> + if (VEC_empty (bound_probe_s, probes))
> + {
> + ui_out_message (current_uiout, 0, _("No probes matched.\n"));
> + return;
> + }
> +
> + /* Disable the selected probes, provided their backends support the
> + notion of enabling a probe. */
> + for (i = 0; VEC_iterate (bound_probe_s, probes, i, probe); ++i)
> + {
> + const struct probe_ops *pops = probe->probe->pops;
> + if (pops->disable_probe)
> + {
> + pops->disable_probe (probe->probe);
> + ui_out_message (current_uiout, 0,
> + _("Probe %s:%s disabled.\n"),
> + probe->probe->provider, probe->probe->name);
> + }
> + }
> +}
Same comments for enable_probes_command apply here as well.
> +
> /* See comments in probe.h. */
>
> CORE_ADDR
> @@ -946,4 +1046,27 @@ _initialize_probe (void)
> _("\
> Show information about all type of probes."),
> info_probes_cmdlist_get ());
> +
> + add_cmd ("probes", no_class, enable_probes_command, _("\
> +Enable probes.\n\
> +Usage: enable probes [PROVIDER [NAME [OBJECT]]]\n\
> +Each argument is a regular expression, used to select probes.\n\
> +PROVIDER matches probe provider names.\n\
> +NAME matches the probe names.\n\
> +OBJECT matches the executable or shared library name.\n\
> +If you do not specify any argument then the command will disable\n\
> +all defined probes."),
> + &enablelist);
> +
> + add_cmd ("probes", no_class, disable_probes_command, _("\
> +Disable probes.\n\
> +Usage: disable probes [PROVIDER [NAME [OBJECT]]]\n\
> +Each argument is a regular expression, used to select probes.\n\
> +PROVIDER matches probe provider names.\n\
> +NAME matches the probe names.\n\
> +OBJECT matches the executable or shared library name.\n\
> +If you do not specify any argument then the command will disable\n\
> +all defined probes."),
> + &disablelist);
Those commands work on probes, which are special kinds of breakpoints,
so I would specify class_breakpoint instead of no_class.
> +
> }
> diff --git a/gdb/probe.h b/gdb/probe.h
> index b4ff0a6..3f27d0d 100644
> --- a/gdb/probe.h
> +++ b/gdb/probe.h
> @@ -132,6 +132,18 @@ struct probe_ops
>
> void (*gen_info_probes_table_values) (struct probe *probe,
> VEC (const_char_ptr) **values);
> +
> + /* Enable a probe. The semantics of "enabling" a probe depend on
> + the specific backend and the field can be NULL in case enabling
> + probes is not supported. */
> +
> + void (*enable_probe) (struct probe *probe);
> +
> + /* Disable a probe. The semantics of "disabling" a probe depend
> + on the specific backend and the field can be NULL in case
> + disabling probes is not supported. */
> +
> + void (*disable_probe) (struct probe *probe);
> };
>
> /* Definition of a vector of probe_ops. */
> diff --git a/gdb/stap-probe.c b/gdb/stap-probe.c
> index 17a73fc..c5d0dbb 100644
> --- a/gdb/stap-probe.c
> +++ b/gdb/stap-probe.c
> @@ -1675,6 +1675,8 @@ static const struct probe_ops stap_probe_ops =
> stap_probe_destroy,
> stap_gen_info_probes_table_header,
> stap_gen_info_probes_table_values,
> + NULL, /* enable_probe */
> + NULL /* disable_probe */
> };
>
> /* Implementation of the `info probes stap' command. */
> --
> 1.7.10.4
--
Sergio
GPG key ID: 0x65FC5E36
Please send encrypted e-mail if possible
http://sergiodj.net/