This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH v2] Wrap BFD headers in extern "C"


On 02/09/2015 11:33 PM, Andrew Pinski wrote:

>> --- a/bfd/elf-bfd.h
>> +++ b/bfd/elf-bfd.h
>> @@ -22,6 +22,10 @@
>>  #ifndef _LIBELF_H_
>>  #define _LIBELF_H_ 1
>>
>> +#ifdef __cplusplus
>> +extern "C" {
>> +#endif
>> +
>>  #include "elf/common.h"
>>  #include "elf/external.h"
>>  #include "elf/internal.h"
> 
> This is bad form to wrap header files also.

Thanks.  I admit I was a bit lazy here.

Here's a better patch.  The posted version of the GDB
series didn't link with --enable-targets=all yet (more extern "C"
issues), but with this one, along with a similar opcodes patch,
it will.

OK to apply?

---------------
From: Pedro Alves <palves@redhat.com>
Subject: [PATCH] Wrap BFD headers in extern "C"

These were the BFD changes needed for building a C++ GDB with
--enable-targets=all, on x86_64 Fedora 20.

For libbfd.h and libcoff.h, this does same as already done when
generating bfd.h: open extern "C" in the -in.h header, and close it
from the Makefile.

bfd/doc/ChangeLog:
2015-02-10  Pedro Alves  <palves@redhat.com>

	* Makefile.am (libbfd.h, libcoff.h): Close extern "C" scope.
	* Makefile.in: Regenerate.

bfd/ChangeLog:
2015-02-10  Pedro Alves  <palves@redhat.com>

	* libbfd-in.h [__cplusplus]: Open extern "C" scope.
	* libcoff-in.h [__cplusplus]: Open extern "C" scope.
	* libbfd.h: Regenerate.
	* libcoff.h: Regenerate.

	* elf-bfd.h [__cplusplus]: Wrap in extern "C".
	* mach-o.h [__cplusplus]: Wrap in extern "C".
	* som.h [__cplusplus]: Wrap in extern "C".
---
 bfd/doc/Makefile.am | 6 ++++++
 bfd/doc/Makefile.in | 6 ++++++
 bfd/elf-bfd.h       | 7 +++++++
 bfd/libbfd-in.h     | 4 ++++
 bfd/libbfd.h        | 7 +++++++
 bfd/libcoff-in.h    | 4 ++++
 bfd/libcoff.h       | 7 +++++++
 bfd/mach-o.h        | 8 ++++++++
 bfd/som.h           | 7 +++++++
 9 files changed, 56 insertions(+)

diff --git a/bfd/doc/Makefile.am b/bfd/doc/Makefile.am
index 779f361..52da14e 100644
--- a/bfd/doc/Makefile.am
+++ b/bfd/doc/Makefile.am
@@ -275,6 +275,9 @@ libbfd.h: $(LIBBFD_H_DEP)
 		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
 	  esac; \
 	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
 
 LIBCOFF_H_DEP = \
 	$(srcdir)/../libcoff-in.h	\
@@ -294,6 +297,9 @@ libcoff.h: $(LIBCOFF_H_DEP)
 		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
 	  esac; \
 	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
 
 BFD_H_DEP = \
 	$(srcdir)/../bfd-in.h 		\
diff --git a/bfd/doc/Makefile.in b/bfd/doc/Makefile.in
index 78d8ec0..72099f1 100644
--- a/bfd/doc/Makefile.in
+++ b/bfd/doc/Makefile.in
@@ -960,6 +960,9 @@ libbfd.h: $(LIBBFD_H_DEP)
 		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
 	  esac; \
 	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
 
 libcoff.h: $(LIBCOFF_H_DEP)
 	echo "$(LIBCOFF_H_DEP)" | sed -f $(srcdir)/header.sed > $@
@@ -972,6 +975,9 @@ libcoff.h: $(LIBCOFF_H_DEP)
 		./$(MKDOC) -i -f $(srcdir)/proto.str < $$file >> $@ ;; \
 	  esac; \
 	done
+	echo "#ifdef __cplusplus" >> $@
+	echo "}" >> $@
+	echo "#endif" >> $@
 
 bfd.h: $(BFD_H_DEP)
 	echo "$(BFD_H_DEP)" | sed -f $(srcdir)/header.sed > $@
diff --git a/bfd/elf-bfd.h b/bfd/elf-bfd.h
index 49ffe79..495053d 100644
--- a/bfd/elf-bfd.h
+++ b/bfd/elf-bfd.h
@@ -27,6 +27,10 @@
 #include "elf/internal.h"
 #include "bfdlink.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* The number of entries in a section is its size divided by the size
    of a single entry.  This is normally only applicable to reloc and
    symbol table sections.
@@ -2540,4 +2544,7 @@ extern asection _bfd_elf_large_com_section;
     (!(H)->unique_global \
      && ((INFO)->symbolic || ((INFO)->dynamic && !(H)->dynamic)))
 
+#ifdef __cplusplus
+}
+#endif
 #endif /* _LIBELF_H_ */
diff --git a/bfd/libbfd-in.h b/bfd/libbfd-in.h
index cb7805f..7c661e3 100644
--- a/bfd/libbfd-in.h
+++ b/bfd/libbfd-in.h
@@ -24,6 +24,10 @@
 
 #include "hashtab.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Align an address upward to a boundary, expressed as a number of bytes.
    E.g. align to an 8-byte boundary with argument of 8.  Take care never
    to wrap around if the address is within boundary-1 of the end of the
diff --git a/bfd/libbfd.h b/bfd/libbfd.h
index a1c0a01..bd56afb 100644
--- a/bfd/libbfd.h
+++ b/bfd/libbfd.h
@@ -29,6 +29,10 @@
 
 #include "hashtab.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Align an address upward to a boundary, expressed as a number of bytes.
    E.g. align to an 8-byte boundary with argument of 8.  Take care never
    to wrap around if the address is within boundary-1 of the end of the
@@ -3015,3 +3019,6 @@ void *bfd_arch_default_fill (bfd_size_type count,
     bfd_boolean code);
 
 /* Extracted from elf.c.  */
+#ifdef __cplusplus
+}
+#endif
diff --git a/bfd/libcoff-in.h b/bfd/libcoff-in.h
index 6d00db0..34e71a8 100644
--- a/bfd/libcoff-in.h
+++ b/bfd/libcoff-in.h
@@ -22,6 +22,10 @@
 #include "bfdlink.h"
 #include "coff-bfd.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Object file tdata; access macros.  */
 
 #define coff_data(bfd)		      ((bfd)->tdata.coff_obj_data)
diff --git a/bfd/libcoff.h b/bfd/libcoff.h
index df0e00f..ee72de3 100644
--- a/bfd/libcoff.h
+++ b/bfd/libcoff.h
@@ -26,6 +26,10 @@
 #include "bfdlink.h"
 #include "coff-bfd.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /* Object file tdata; access macros.  */
 
 #define coff_data(bfd)		      ((bfd)->tdata.coff_obj_data)
@@ -951,3 +955,6 @@ typedef struct
    PE object file.  */
 #define bfd_pei_p(abfd) \
   (CONST_STRNEQ ((abfd)->xvec->name, "pei-"))
+#ifdef __cplusplus
+}
+#endif
diff --git a/bfd/mach-o.h b/bfd/mach-o.h
index bc694ba..0445398 100644
--- a/bfd/mach-o.h
+++ b/bfd/mach-o.h
@@ -24,6 +24,10 @@
 #include "bfd.h"
 #include "mach-o/loader.h"
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 typedef struct bfd_mach_o_header
 {
   unsigned long magic;
@@ -746,4 +750,8 @@ bfd_mach_o_backend_data;
 #define SYM_MACHO_FIELDS_UNSET ((bfd_vma) -1)
 #define SYM_MACHO_FIELDS_NOT_VALIDATED ((bfd_vma) -2)
 
+#ifdef __cplusplus
+}
+#endif
+
 #endif /* _BFD_MACH_O_H_ */
diff --git a/bfd/som.h b/bfd/som.h
index a300104..7f8a5ba 100644
--- a/bfd/som.h
+++ b/bfd/som.h
@@ -40,6 +40,10 @@
 #include <dl.h>
 #endif
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 #if defined (HOST_HPPABSD) || defined (HOST_HPPAOSF)
 /* BSD uses a completely different scheme for object file identification.
    so for now, define _PA_RISC_ID to accept any random value for a model
@@ -235,4 +239,7 @@ int **       hppa_som_gen_reloc_type           (bfd *, int, int, enum hppa_reloc
 bfd_boolean  bfd_som_attach_compilation_unit   (bfd *, const char *, const char *, const char *, const char *);
 asection *   bfd_section_from_som_symbol       (bfd *abfd, struct som_external_symbol_dictionary_record *symbol);
 
+#ifdef __cplusplus
+}
+#endif
 #endif /* _SOM_H */
-- 
1.9.3



Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]