[PATCH v2 08/25] Make input_fd be per UI

[Pedro Alves <palves at redhat dot com>]

And with that, we can switch the current UI to the UI whose input
descriptor woke up the event loop.  IOW, if the user types in UI 2,
the event loop wakes up, switches to UI 2, and processes the input.
Next the user types in UI 3, the event loop wakes up and switches to
UI 3, etc.
---
 gdb/event-top.c | 33 ++++++++++++++-------------------
 gdb/event-top.h |  1 -
 gdb/linux-nat.c |  2 --
 gdb/main.c      |  1 +
 gdb/remote.c    |  2 --
 gdb/target.c    | 10 ++++++++++
 gdb/top.h       |  4 ++++
 7 files changed, 29 insertions(+), 24 deletions(-)

diff --git a/gdb/event-top.c b/gdb/event-top.c
index 1ca2901..c7dba5a 100644
--- a/gdb/event-top.c
+++ b/gdb/event-top.c
@@ -93,10 +93,6 @@ int async_command_editing_p;
    asynchronous execution command.  */
 int exec_done_display_p = 0;
 
-/* This is the file descriptor for the input stream that GDB uses to
-   read commands from.  */
-int input_fd;
-
 /* Used by the stdin event handler to compensate for missed stdin events.
    Setting this to a non-zero value inside an stdin callback makes the callback
    run again.  */
@@ -411,12 +407,16 @@ get_command_line_buffer (void)
 void
 stdin_event_handler (int error, gdb_client_data client_data)
 {
-  struct ui *ui = current_ui;
+  struct ui *ui = (struct ui *) client_data;
+
+  /* Switch to the UI whose input descriptor woke up the event
+     loop.  */
+  current_ui = ui;
 
   if (error)
     {
       printf_unfiltered (_("error detected on stdin\n"));
-      delete_file_handler (input_fd);
+      delete_file_handler (ui->input_fd);
       /* If stdin died, we may as well kill gdb.  */
       quit_command ((char *) 0, stdin == ui->instream);
     }
@@ -1044,18 +1044,11 @@ gdb_setup_readline (void)
   /* Tell readline to use the same input stream that gdb uses.  */
   rl_instream = ui->instream;
 
-  /* Get a file descriptor for the input stream, so that we can
-     register it with the event loop.  */
-  input_fd = fileno (ui->instream);
-
-  /* Now we need to create the event sources for the input file
-     descriptor.  */
-  /* At this point in time, this is the only event source that we
-     register with the even loop.  Another source is going to be the
-     target program (inferior), but that must be registered only when
-     it actually exists (I.e. after we say 'run' or after we connect
-     to a remote target.  */
-  add_file_handler (input_fd, stdin_event_handler, 0);
+  /* Now create the event source for this UI's input file descriptor.
+     Another source is going to be the target program (inferior), but
+     that must be registered only when it actually exists (I.e. after
+     we say 'run' or after we connect to a remote target.  */
+  add_file_handler (ui->input_fd, stdin_event_handler, ui);
 }
 
 /* Disable command input through the standard CLI channels.  Used in
@@ -1064,6 +1057,8 @@ gdb_setup_readline (void)
 void
 gdb_disable_readline (void)
 {
+  struct ui *ui = current_ui;
+
   /* FIXME - It is too heavyweight to delete and remake these every
      time you run an interpreter that needs readline.  It is probably
      better to have the interpreters cache these, which in turn means
@@ -1078,5 +1073,5 @@ gdb_disable_readline (void)
 #endif
 
   gdb_rl_callback_handler_remove ();
-  delete_file_handler (input_fd);
+  delete_file_handler (ui->input_fd);
 }
diff --git a/gdb/event-top.h b/gdb/event-top.h
index 04956a5..4fe7737 100644
--- a/gdb/event-top.h
+++ b/gdb/event-top.h
@@ -57,7 +57,6 @@ extern void async_enable_stdin (void);
 extern int async_command_editing_p;
 extern int exec_done_display_p;
 extern struct prompts the_prompts;
-extern int input_fd;
 extern void (*after_char_processing_hook) (void);
 extern int call_stdin_event_handler_again_p;
 extern void gdb_readline_no_editing_callback (void *client_data);
diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c
index 0829bcb..69270fa 100644
--- a/gdb/linux-nat.c
+++ b/gdb/linux-nat.c
@@ -4287,7 +4287,6 @@ linux_nat_terminal_inferior (struct target_ops *self)
   if (!async_terminal_is_ours)
     return;
 
-  delete_file_handler (input_fd);
   async_terminal_is_ours = 0;
   set_sigint_trap ();
 }
@@ -4313,7 +4312,6 @@ linux_nat_terminal_ours (struct target_ops *self)
     return;
 
   clear_sigint_trap ();
-  add_file_handler (input_fd, stdin_event_handler, 0);
   async_terminal_is_ours = 1;
 }
 
diff --git a/gdb/main.c b/gdb/main.c
index 89037cf..eee9a8b 100644
--- a/gdb/main.c
+++ b/gdb/main.c
@@ -507,6 +507,7 @@ captured_main (void *data)
   clear_quit_flag ();
   saved_command_line = (char *) xstrdup ("");
   ui->instream = stdin;
+  ui->input_fd = fileno (stdin);
 
 #ifdef __MINGW32__
   /* Ensure stderr is unbuffered.  A Cygwin pty or pipe is implemented
diff --git a/gdb/remote.c b/gdb/remote.c
index af0a08a..2c0aaff 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -5940,7 +5940,6 @@ remote_terminal_inferior (struct target_ops *self)
      can go away.  */
   if (!remote_async_terminal_ours_p)
     return;
-  delete_file_handler (input_fd);
   remote_async_terminal_ours_p = 0;
   async_initialize_sigint_signal_handler ();
   /* NOTE: At this point we could also register our selves as the
@@ -5959,7 +5958,6 @@ remote_terminal_ours (struct target_ops *self)
   if (remote_async_terminal_ours_p)
     return;
   async_cleanup_sigint_signal_handler (NULL);
-  add_file_handler (input_fd, stdin_event_handler, 0);
   remote_async_terminal_ours_p = 1;
 }
 
diff --git a/gdb/target.c b/gdb/target.c
index ac66a3a..86e7074 100644
--- a/gdb/target.c
+++ b/gdb/target.c
@@ -43,6 +43,8 @@
 #include "agent.h"
 #include "auxv.h"
 #include "target-debug.h"
+#include "top.h"
+#include "event-top.h"
 
 static void target_info (char *, int);
 
@@ -477,6 +479,8 @@ target_terminal_is_ours (void)
 void
 target_terminal_inferior (void)
 {
+  struct ui *ui = current_ui;
+
   /* A background resume (``run&'') should leave GDB in control of the
      terminal.  Use target_can_async_p, not target_is_async_p, since at
      this point the target is not async yet.  However, if sync_execution
@@ -484,6 +488,8 @@ target_terminal_inferior (void)
   if (target_can_async_p () && !sync_execution)
     return;
 
+  delete_file_handler (ui->input_fd);
+
   if (terminal_state == terminal_is_inferior)
     return;
 
@@ -498,6 +504,10 @@ target_terminal_inferior (void)
 void
 target_terminal_ours (void)
 {
+  struct ui *ui = current_ui;
+
+  add_file_handler (ui->input_fd, stdin_event_handler, ui);
+
   if (terminal_state == terminal_is_ours)
     return;
 
diff --git a/gdb/top.h b/gdb/top.h
index d9322bd..beeb723 100644
--- a/gdb/top.h
+++ b/gdb/top.h
@@ -73,6 +73,10 @@ struct ui
      interacting via a GUI.  */
   FILE *instream;
 
+  /* The file descriptor for the input stream, so that we can register
+     it with the event loop.  */
+  int input_fd;
+
   /* The fields below that start with "m_" are "private".  They're
      meant to be accessed through wrapper macros that make them look
      like globals.  */
-- 
2.5.0