This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 3/7] Force to insert software single step breakpoint


Pedro Alves <palves@redhat.com> writes:

> Sounds like we may need to look at the single-step breakpoint's thread 
> id, and only insert it if it is for the thread that is going to be 
> doing the step-over?  We may need to record that in step_over_info and 
> pass more info to stepping_past_instruction_at.

The patch below does this, however, I don't pass more info to
stepping_past_instruction_at, instead I add a new function
thread_is_being_stepped_over_p.

>
>> --- a/gdb/gdbarch.sh
>> +++ b/gdb/gdbarch.sh
>> @@ -609,7 +609,10 @@ m:CORE_ADDR:addr_bits_remove:CORE_ADDR
>> addr:addr::core_addr_identity::0
>>  # target can single step.  If not, then implement single step using
>> breakpoints.
>>  #
>>  # A return value of 1 means that the software_single_step breakpoints
>> -# were inserted; 0 means they were not.
>> +# were inserted; 0 means they were not.  Multiple breakpoints may be
>> +# inserted for some instructions such as conditional branch.  However,
>> +# each implementation must always evaluate the condition and only put
>> +# the breakpoint at the branch destination if the condition is true.
>
> I'd add:
>
> (...) condition is true, so that we ensure forward progress when 
> stepping past a conditional branch to self.
>
> This will help porters evaluate whether that's really necessary
> for their ports.

Done.

-- 
Yao (éå)

Subject: [PATCH] Force to insert software single step breakpoint

GDB doesn't insert software single step breakpoint if the instruction
branches to itself, so that the program can't stop after command "si".

(gdb) b 32
Breakpoint 2 at 0x8680: file git/gdb/testsuite/gdb.base/branch-to-self.c, line 32.
(gdb) c
Continuing.

Breakpoint 2, main () at gdb/git/gdb/testsuite/gdb.base/branch-to-self.c:32
32	  asm (".Lhere: " BRANCH_INSN " .Lhere"); /* loop-line */
(gdb) si
infrun: clear_proceed_status_thread (Thread 3991.3991)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 3991.3991] for step-over
infrun: skipping breakpoint: stepping past insn at: 0x8680
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending packet: $Z0,8678,4#f3...Packet received: OK
infrun: skipping breakpoint: stepping past insn at: 0x8680
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sending packet: $Z0,b6fe86c8,4#82...Packet received: OK
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=1, current thread [Thread 3991.3991] at 0x868

breakpoint.c:should_be_inserted thinks the breakpoint shouldn't be
inserted, which is wrong.  This patch restrict the condition that
only skip the non-single-step breakpoints if they are inserted at
the place we are stepping over, however we don't want to skip
single-step breakpoint if its thread is the thread we are stepping
over, so in this patch, I add a thread num in 'struct step_over_info'
to record the thread we're stepping over.

gdb:

2016-04-20  Yao Qi  <yao.qi@linaro.org>

	* breakpoint.c (should_be_inserted): Return 0 if the location's
	owner is not single step breakpoint or single step brekapoint's
	owner isn't the thread we are stepping over.
	* gdbarch.sh (software_single_step): Update comments.
	* gdbarch.h: Regenerated.
	* infrun.c (struct step_over_info) <thread>: New field.
	(set_step_over_info): New argument 'thread'.  Callers updated.
	(clear_step_over_info): Set field thread to -1.
	(thread_is_being_stepped_over_p): New function.
	* infrun.h (thread_is_being_stepped_over_p): Declaration.

diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index f99a7ab..64e97c6 100644
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -2219,11 +2219,22 @@ should_be_inserted (struct bp_location *bl)
     return 0;
 
   /* Don't insert a breakpoint if we're trying to step past its
-     location.  */
+     location except that the breakpoint is single-step breakpoint
+     and the single-step breakpoint's owner is the thread we're
+     stepping over.  */
   if ((bl->loc_type == bp_loc_software_breakpoint
        || bl->loc_type == bp_loc_hardware_breakpoint)
       && stepping_past_instruction_at (bl->pspace->aspace,
-				       bl->address))
+				       bl->address)
+      /* The single-step breakpoint may be inserted at the location
+	 we're trying to step if the instruction branches to itself.
+	 However, the instruction won't be executed at all and it may
+	 break the semantics of the instruction, for example, the
+	 instruction is a conditional branch or updates some flags.
+	 We can't fix it unless GDB is able to emulate the instruction
+	 or switch to displaced stepping.  */
+      && !(bl->owner->type == bp_single_step
+	   && thread_is_being_stepped_over_p (bl->owner->thread)))
     {
       if (debug_infrun)
 	{
diff --git a/gdb/gdbarch.h b/gdb/gdbarch.h
index 252fc4b..859ba85 100644
--- a/gdb/gdbarch.h
+++ b/gdb/gdbarch.h
@@ -650,7 +650,12 @@ extern void set_gdbarch_addr_bits_remove (struct gdbarch *gdbarch, gdbarch_addr_
    target can single step.  If not, then implement single step using breakpoints.
   
    A return value of 1 means that the software_single_step breakpoints
-   were inserted; 0 means they were not. */
+   were inserted; 0 means they were not.  Multiple breakpoints may be
+   inserted for some instructions such as conditional branch.  However,
+   each implementation must always evaluate the condition and only put
+   the breakpoint at the branch destination if the condition is true, so
+   that we ensure forward progress when stepping past a conditional
+   branch to self. */
 
 extern int gdbarch_software_single_step_p (struct gdbarch *gdbarch);
 
diff --git a/gdb/gdbarch.sh b/gdb/gdbarch.sh
index 37f59b7..c8787c2 100755
--- a/gdb/gdbarch.sh
+++ b/gdb/gdbarch.sh
@@ -609,7 +609,12 @@ m:CORE_ADDR:addr_bits_remove:CORE_ADDR addr:addr::core_addr_identity::0
 # target can single step.  If not, then implement single step using breakpoints.
 #
 # A return value of 1 means that the software_single_step breakpoints
-# were inserted; 0 means they were not.
+# were inserted; 0 means they were not.  Multiple breakpoints may be
+# inserted for some instructions such as conditional branch.  However,
+# each implementation must always evaluate the condition and only put
+# the breakpoint at the branch destination if the condition is true, so
+# that we ensure forward progress when stepping past a conditional
+# branch to self.
 F:int:software_single_step:struct frame_info *frame:frame
 
 # Return non-zero if the processor is executing a delay slot and a
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 696105d..1ccd648 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -1296,6 +1296,9 @@ struct step_over_info
   /* The instruction being stepped over triggers a nonsteppable
      watchpoint.  If true, we'll skip inserting watchpoints.  */
   int nonsteppable_watchpoint_p;
+
+  /* The thread's global number.  */
+  int thread;
 };
 
 /* The step-over info of the location that is being stepped over.
@@ -1329,11 +1332,13 @@ static struct step_over_info step_over_info;
 
 static void
 set_step_over_info (struct address_space *aspace, CORE_ADDR address,
-		    int nonsteppable_watchpoint_p)
+		    int nonsteppable_watchpoint_p,
+		    int thread)
 {
   step_over_info.aspace = aspace;
   step_over_info.address = address;
   step_over_info.nonsteppable_watchpoint_p = nonsteppable_watchpoint_p;
+  step_over_info.thread = thread;
 }
 
 /* Called when we're not longer stepping over a breakpoint / an
@@ -1348,6 +1353,7 @@ clear_step_over_info (void)
   step_over_info.aspace = NULL;
   step_over_info.address = 0;
   step_over_info.nonsteppable_watchpoint_p = 0;
+  step_over_info.thread = -1;
 }
 
 /* See infrun.h.  */
@@ -1365,6 +1371,15 @@ stepping_past_instruction_at (struct address_space *aspace,
 /* See infrun.h.  */
 
 int
+thread_is_being_stepped_over_p (int thread)
+{
+  return (step_over_info.aspace != NULL
+	  && thread == step_over_info.thread);
+}
+
+/* See infrun.h.  */
+
+int
 stepping_past_nonsteppable_watchpoint (void)
 {
   return step_over_info.nonsteppable_watchpoint_p;
@@ -2579,7 +2594,7 @@ resume (enum gdb_signal sig)
 	    stop_all_threads ();
 
 	  set_step_over_info (get_regcache_aspace (regcache),
-			      regcache_read_pc (regcache), 0);
+			      regcache_read_pc (regcache), 0, tp->global_num);
 
 	  step = maybe_software_singlestep (gdbarch, pc);
 
@@ -7750,10 +7765,11 @@ keep_going_pass_signal (struct execution_control_state *ecs)
 	  && (remove_wps || !use_displaced_stepping (ecs->event_thread)))
 	{
 	  set_step_over_info (get_regcache_aspace (regcache),
-			      regcache_read_pc (regcache), remove_wps);
+			      regcache_read_pc (regcache), remove_wps,
+			      ecs->event_thread->global_num);
 	}
       else if (remove_wps)
-	set_step_over_info (NULL, 0, remove_wps);
+	set_step_over_info (NULL, 0, remove_wps, -1);
 
       /* If we now need to do an in-line step-over, we need to stop
 	 all other threads.  Note this must be done before
diff --git a/gdb/infrun.h b/gdb/infrun.h
index 61d3b20..5f98414 100644
--- a/gdb/infrun.h
+++ b/gdb/infrun.h
@@ -133,6 +133,10 @@ extern void insert_step_resume_breakpoint_at_sal (struct gdbarch *,
 extern int stepping_past_instruction_at (struct address_space *aspace,
 					 CORE_ADDR address);
 
+/* Returns true if thread whose thread number is THREAD is being
+   stepped over.  */
+extern int thread_is_being_stepped_over_p (int thread);
+
 /* Returns true if we're trying to step past an instruction that
    triggers a non-steppable watchpoint.  */
 extern int stepping_past_nonsteppable_watchpoint (void);


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]