This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 01/18] gdb: add or1k and or1knd target support
- From: Stafford Horne <shorne at gmail dot com>
- To: gdb-patches at sourceware dot org
- Cc: openrisc at lists dot librecores dot org, Franck Jullien <franck dot jullien at gmail dot com>
- Date: Thu, 24 Nov 2016 07:10:27 +0900
- Subject: [PATCH 01/18] gdb: add or1k and or1knd target support
- Authentication-results: sourceware.org; auth=none
- References: <1479939044-1341-1-git-send-email-shorne@gmail.com>
From: Franck Jullien <franck.jullien@gmail.com>
This patch is pretty much a copy of the current
GDB 7.2 port of the openrisc processor.
It now supports or1knd (no delay slot target).
This architecture has not been tested.
The default target is or1k (with delay slot).
You can change the target arch with:
(gdb) set architecture or1knd
The target architecture is assumed to be or1knd
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
gdb/ChangeLog:
* or1k-tdesc.c : Add file for or1k support
* or1k-tdesc.h : Add file for or1k support
* configure.tgt : Add or1k targets
* gdb.texinfo : Add OpenRISC documentation
---
gdb/configure.tgt | 26 +
gdb/doc/gdb.texinfo | 102 ++
gdb/or1k-tdep.c | 2983 +++++++++++++++++++++++++++++++++++++++++++++++++++
gdb/or1k-tdep.h | 432 ++++++++
4 files changed, 3543 insertions(+)
create mode 100644 gdb/or1k-tdep.c
create mode 100644 gdb/or1k-tdep.h
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
index 79473c9..2c5418c 100644
--- a/gdb/configure.tgt
+++ b/gdb/configure.tgt
@@ -421,6 +421,32 @@ nios2*-*-*)
gdb_target_obs="nios2-tdep.o"
;;
+or1k-*-linux*)
+ # Target: OpenCores OpenRISC 1000 32-bit implementation for Linux
+ gdb_target_obs="or1k-tdep.o corelow.o"
+ gdb_sim=../sim/or1k/libsim.a
+ build_gdbserver=yes
+ ;;
+
+or1k-*-*)
+ # Target: OpenCores OpenRISC 1000 32-bit implementation bare metal
+ gdb_target_obs="or1k-tdep.o"
+ gdb_sim=../sim/or1k/libsim.a
+ ;;
+
+or1knd-*-linux*)
+ # Target: OpenCores OpenRISC 1000 32-bit implementation for Linux, without delay slot
+ gdb_target_obs="or1k-tdep.o corelow.o"
+ gdb_sim=../sim/or1k/libsim.a
+ build_gdbserver=yes
+ ;;
+
+or1knd-*-*)
+ # Target: OpenCores OpenRISC 1000 32-bit implementation bare metal, without delay slot
+ gdb_target_obs="or1k-tdep.o"
+ gdb_sim=../sim/or1k/libsim.a
+ ;;
+
powerpc*-*-freebsd*)
# Target: FreeBSD/powerpc
gdb_target_obs="rs6000-tdep.o ppc-sysv-tdep.o ppc64-tdep.o \
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 6ad2754..50f27b3 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -541,6 +541,10 @@ Steve Tjiang, John Newlin, and Scott Foehner.
Michael Eager and staff of Xilinx, Inc., contributed support for the
Xilinx MicroBlaze architecture.
+The original port to the OpenRISC 1000 is believed to be due to
+Alessandro Forin and Per Bothner. More recent ports have been the work
+of Jeremy Bennett.
+
@node Sample Session
@chapter A Sample @value{GDBN} Session
@@ -22228,6 +22232,104 @@ As usual, you can inquire about the @code{mipsfpu} variable with
@samp{show mipsfpu}.
@end table
+@node OpenRISC 1000
+@subsection OpenRISC 1000
+@cindex OpenRISC 1000
+
+Previous versions of @value{GDBN} supported remote connection via a
+proprietary JTAG protocol using the @samp{target jtag} command. Support
+for this has now been dropped.
+
+
+@table @code
+
+@kindex target remote
+@item target remote
+
+This is now the only way to connect to a remote OpenRISC 1000
+target. This is supported by @dfn{Or1ksim}, the OpenRISC 1000
+architectural simulator, Verilator and Icarus Verilog
+simulations. @dfn{Remote serial protocol} servers are also available to
+drive various hardware implementations via JTAG.
+Connects to remote JTAG server.
+
+Example: @code{target remote :51000}
+
+@kindex target sim
+@item target sim
+
+@dfn{Or1ksim}, the OpenRISC 1000 architectural simulator is now
+incorporated within @value{GDBN} as a simulator target. It is started
+in quiet mode with 8M of memory starting at address 0. It is possible
+to pass arguments to extend this configuration using the @samp{-f}
+option to @samp{target sim}. However for more complex use, the user is
+advised to run @dfn{Or1ksim} separately, with its own configuration
+file, and connect using @samp{target remote}
+
+Example: @code{target sim}
+
+@kindex info spr
+@item info or1k spr
+Displays groups.
+
+@item info spr @var{group}
+@itemx info spr @var{groupno}
+Displays register names in selected group.
+
+@item info spr @var{group} @var{register}
+@itemx info spr @var{register}
+@itemx info spr @var{groupno} @var{registerno}
+@itemx info spr @var{registerno}
+Shows information about specified spr register.
+
+Example: @code{info spr DRR}
+
+@code{DEBUG.DRR = SPR6_21 = 0 (0x0)}
+
+@kindex spr
+@item spr @var{group} @var{register} @var{value}
+@itemx spr @var{register @var{value}}
+@itemx spr @var{groupno} @var{registerno @var{value}}
+@itemx spr @var{registerno @var{value}}
+Writes @var{value} to specified spr register.
+
+Example: spr PICMR 0x24
+@end table
+
+The use of @samp{info} and @samp{spr} commands is anachronistic. At
+some time in the future they will be replaced by @samp{info register @var{spr | group name}}
+and @samp{set $spr=@var{value}}.
+
+There are some known problems with the current implementation
+@cindex OpenRISC 1000 known problems
+
+@enumerate
+
+@item
+@cindex OpenRISC 1000 known problems, hardware breakpoints and watchpoints
+Some OpenRISC 1000 targets support hardware breakpoints and watchpoints.
+Consult the target documentation for details. @value{GDBN} is not
+perfect in handling of watchpoints. It is possible to allocate hardware
+watchpoints and not discover until running that sufficient watchpoints
+are not available. It is also possible that GDB will report watchpoints
+being hit spuriously. This can be down to the assembly code having
+additional memory accesses that are not obviously reflected in the
+source code.
+
+@item
+@cindex OpenRISC 1000 known problems, architectural compatability
+The OpenRISC 1000 architecture has evolved since the first port of @value{GDBN}. In particular the structure of the Unit Present register has
+changed and the CPU Configuration register has been added. The port of
+@value{GDBN} version @value{GDBVN} uses the @emph{current}
+specification of the OpenRISC 1000.
+
+@end enumerate
+
+@cindex Bugs, reporting
+@cindex Reporting bugs
+Reports of bugs are much welcomed. Please report problems through the
+OpenRISC tracker at @uref{http://opencores.org/openrisc,downloads}.
+
@node PowerPC Embedded
@subsection PowerPC Embedded
diff --git a/gdb/or1k-tdep.c b/gdb/or1k-tdep.c
new file mode 100644
index 0000000..6d27a0d
--- /dev/null
+++ b/gdb/or1k-tdep.c
@@ -0,0 +1,2983 @@
+/* Target-dependent code for the 32-bit OpenRISC 1000, for the GNU Debugger.
+
+ Copyright 1988-2008, Free Software Foundation, Inc.
+ Copyright (C) 2008, 2010 Embecosm Limited
+
+ Contributed by Alessandro Forin(af@cs.cmu.edu at CMU
+ and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
+
+ Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
+
+ Contributor Franck Jullien <elec4fun@gmail.com>
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 3 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+/*-----------------------------------------------------------------------------
+ This version for the OpenRISC 1000 architecture is a rewrite by Jeremy
+ Bennett of the old GDB 5.3 interface to make use of gdbarch for GDB 6.8. It
+ has since been updated for GDB 7.2 and GDB 7.5.
+
+ The code tries to follow the GDB coding style.
+
+ Commenting is Doxygen compatible.
+
+ Notes on the GDB 7.5 version
+ ============================
+
+ This version is just an upgrade of the previous port. It does use CGEN
+ for instruction lookup in or1k_single_step_through_delay as the new toolchain
+ is CGEN based.
+
+ This version is compatible with or1knd target (no delay slot version of the
+ toolchain). We check in bfd_arch_info if the mach is bfd_mach_or1k or
+ bfd_mach_or1knd to choose if or1k_single_step_through_delay must be
+ implemented.
+
+ Notes on the GDB 7.2 version
+ ============================
+
+ The primary change is to support the new GCC 4.5.1 compiler, which no
+ longer adds preceding underscores to global values and uses DWARF2 as its
+ default debug format.
+
+ This version now supports Or1ksim integrated as a simulator library, so
+ "target sim" will work. It does require Or1ksim to be available as a
+ library at configuration time, with the Or1ksim installation directory
+ specified by the argument --with-or1ksim.
+
+ The ad-hoc prologue analysis, which was always a weak point has been
+ stripped out and replaced with code based on the generic approach in
+ prologue-value.c and prologue-value.h.
+
+ The objective with this version is to get reasonable results on regression
+ testing. Something the older versions never achieved.
+
+ Notes on the GDB 6.8 version
+ ============================
+
+ Much has been stripped out in the interests of getting a basic working
+ system. This is described as the OpenRISC 1000 target architecture, so
+ should work with 32 and 64 bit versions of that architecture and should
+ work whether or not they have floating point and/or vector registers,
+ although to date it has only been tested with the 32-bit integer
+ archtiecture.
+
+ The info trace command has been removed. The meaning of this is not clear -
+ it relies on a value in register 255 of the debug group, which is
+ undocumented.
+
+ All the hardware trace has been removed for the time being. The new debug
+ interface does not support hardware trace, so there is no plan to reinstate
+ this functionality.
+
+ Support for multiple contexts (which was rudimentary, and not working) has
+ been removed. */
+/*---------------------------------------------------------------------------*/
+
+#include "demangle.h"
+#include "defs.h"
+#include "gdb_string.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "gdbcore.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbtypes.h"
+#include "target.h"
+#include "regcache.h"
+
+#include "or1k-tdep.h"
+
+#include "safe-ctype.h"
+#include "block.h"
+#include "reggroups.h"
+#include "arch-utils.h"
+#include "frame.h"
+#include "frame-unwind.h"
+#include "frame-base.h"
+#include "dwarf2-frame.h"
+#include "trad-frame.h"
+#include "regset.h"
+
+#include <inttypes.h>
+
+#include "dis-asm.h"
+#include "opcodes/or1k-desc.h"
+#include "opcodes/or1k-opc.h"
+
+
+
+/* The gdbarch_tdep structure. */
+
+/*! OR1K specific per-architecture information. Replaces
+ struct_or1k_implementation. A lot of this info comes from the config regs,
+ so cannot be put in place until we have the actual target. Up until then
+ we have reasonable defaults. */
+struct gdbarch_tdep
+{
+ unsigned int num_matchpoints; /* Total matchpoints available. */
+ unsigned int num_gpr_regs; /* Number of general registers. */
+ int bytes_per_word;
+ int bytes_per_address;
+ CGEN_CPU_DESC gdb_cgen_cpu_desc;
+};
+
+/* Support functions for the architecture definition */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Get an instruction
+
+ This reads from memory. The old version relied on the frame, this relies
+ just on the architecture. The old version also guaranteed not to get a
+ software breakpoint if one had been set. However that seems to happen just
+ before execution and is removed immediately after, so we believe should not
+ happen. The old function from GDB 6.8 to do this has been deleted.
+
+ @param[in] gdbarch Architecture for which we are getting the instruction.
+ @param[in] addr Address from which to get the instruction
+
+ @return The instruction */
+/*---------------------------------------------------------------------------*/
+
+static ULONGEST
+or1k_fetch_instruction (struct gdbarch *gdbarch,
+ CORE_ADDR addr)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ char buf[OR1K_INSTLEN];
+ int status;
+
+ status = target_read_memory (addr, buf, OR1K_INSTLEN);
+
+ if (status)
+ {
+ memory_error (status, addr);
+ }
+
+ return extract_unsigned_integer (buf, OR1K_INSTLEN, byte_order);
+
+} /* or1k_fetch_instruction() */
+
+
+/*---------------------------------------------------------------------------*/
+/*!Generic function to read bits from an instruction
+
+ printf style. Basic syntax
+
+ or1k_analyse_inst (inst, format, &arg1, &arg2 ...)
+
+ Format string can contain the following characters:
+
+ - SPACE: Ignored, just for layout
+ - 0: Match with a zero bit
+ - 1: Match with a one bit
+ - %<n>b: Match <n> bits to the next argument (n decimal)
+
+ If the arg corresponding to a bit field is non-null, the value will be
+ assigned to that argument (using NULL allows fields to be skipped).
+
+ Any bad string will cause a fatal error. These are constant strings, so
+ should be correct.
+
+ The bit field must be 32 bits long. A failure here will cause a fatal error
+ for the same reason.
+
+ @note The format string is presented MS field to LS field, left to
+ right. This means that it is read lowest numbered char first.
+
+ @note Some of the arg fields may be populated, even if recognition
+ ultimately fails.
+
+ @param[in] inst The instruction to analyse
+ @param[in] format The format string
+ @param[out] ... Argument fields
+
+ @return 1 (TRUE) if the instruction matches, 0 (FALSE) otherwise. */
+/*---------------------------------------------------------------------------*/
+static int
+or1k_analyse_inst (uint32_t inst,
+ const char *format,
+ ...)
+{
+ /* Break out each field in turn, validating as we go. */
+ va_list ap;
+
+ int i;
+ int iptr = 0; /* Instruction pointer */
+
+ va_start (ap, format);
+
+ for (i = 0; 0 != format[i];)
+ {
+ const char *start_ptr;
+ char *end_ptr;
+
+ uint32_t bits; /* Bit substring of interest */
+ uint32_t width; /* Substring width */
+ uint32_t *arg_ptr;
+
+ switch (format[i])
+ {
+ case ' ': i++; break; /* Formatting: ignored */
+
+ case '0': case '1': /* Constant bit field */
+ bits = (inst >> (OR1K_INSTBITLEN - iptr - 1)) & 0x1;
+
+ if ((format[i] - '0') != bits)
+ {
+ return 0;
+ }
+
+ iptr++;
+ i++;
+ break;
+
+ case '%': /* Bit field */
+ i++;
+ start_ptr = &(format[i]);
+ width = strtoul (start_ptr, &end_ptr, 10);
+
+ /* Check we got something, and if so skip on */
+ if (start_ptr == end_ptr)
+ {
+ fatal ("bitstring \"%s\" at offset %d has no length field.\n",
+ format, i);
+ }
+
+ i += end_ptr - start_ptr;
+
+ /* Look for and skip the terminating 'b'. If it's not there, we
+ still give a fatal error, because these are fixed strings that
+ just should not be wrong. */
+ if ('b' != format[i++])
+ {
+ fatal ("bitstring \"%s\" at offset %d has no terminating 'b'.\n",
+ format, i);
+ }
+
+ /* Break out the field. There is a special case with a bit width of
+ 32. */
+ if (32 == width)
+ {
+ bits = inst;
+ }
+ else
+ {
+ bits = (inst >> (OR1K_INSTBITLEN - iptr - width)) & ((1 << width) - 1);
+ }
+
+ arg_ptr = va_arg (ap, uint32_t *);
+ *arg_ptr = bits;
+ iptr += width;
+ break;
+
+ default:
+ fatal ("invalid character in bitstring \"%s\" at offset %d.\n",
+ format, i);
+ break;
+ }
+ }
+
+ /* Is the length OK? */
+ gdb_assert (OR1K_INSTBITLEN == iptr);
+
+ return 1; /* We succeeded */
+
+} /* or1k_analyse_inst () */
+
+
+/*---------------------------------------------------------------------------*/
+/*!Analyse a l.addi instruction
+
+ General form is:
+
+ l.addi rD,rA,I
+
+ Makes use of the generic analysis function (@see or1k_analyse_inst ()).
+
+ @param[in] inst The instruction to analyse.
+ @param[out] rd_ptr Pointer to the rD value.
+ @param[out] ra_ptr Pointer to the rA value.
+ @param[out] simm_ptr Pointer to the signed immediate value.
+
+ @return 1 (TRUE) if the instruction matches, 0 (FALSE) otherwise. */
+/*---------------------------------------------------------------------------*/
+static int
+or1k_analyse_l_addi (uint32_t inst,
+ unsigned int *rd_ptr,
+ unsigned int *ra_ptr,
+ int *simm_ptr)
+{
+ /* Instruction fields */
+ uint32_t rd, ra, i;
+
+ if (or1k_analyse_inst (inst, "10 0111 %5b %5b %16b", &rd, &ra, &i))
+ {
+ /* Found it. Construct the result fields */
+ *rd_ptr = (unsigned int) rd;
+ *ra_ptr = (unsigned int) ra;
+ *simm_ptr = (int) (((i & 0x8000) == 0x8000) ? 0xffff0000 | i : i);
+
+ return 1; /* Success */
+ }
+ else
+ {
+ return 0; /* Failure */
+ }
+} /* or1k_analyse_l_addi () */
+
+
+/*---------------------------------------------------------------------------*/
+/*!Analyse a l.sw instruction
+
+ General form is:
+
+ l.sw I(rA),rB
+
+ Makes use of the generic analysis function (@see or1k_analyse_inst ()).
+
+ @param[in] inst The instruction to analyse.
+ @param[out] simm_ptr Pointer to the signed immediate value.
+ @param[out] ra_ptr Pointer to the rA value.
+ @param[out] rb_ptr Pointer to the rB value.
+
+ @return 1 (TRUE) if the instruction matches, 0 (FALSE) otherwise. */
+/*---------------------------------------------------------------------------*/
+static int
+or1k_analyse_l_sw (uint32_t inst,
+ int *simm_ptr,
+ unsigned int *ra_ptr,
+ unsigned int *rb_ptr)
+{
+ /* Instruction fields */
+ uint32_t ihi, ilo, ra, rb;
+
+ if (or1k_analyse_inst (inst, "11 0101 %5b %5b %5b %11b", &ihi, &ra, &rb,
+ &ilo))
+
+ {
+ /* Found it. Construct the result fields */
+ *simm_ptr = (int) ((ihi << 11) | ilo);
+ *simm_ptr |= ((ihi & 0x10) == 0x10) ? 0xffff0000 : 0;
+
+ *ra_ptr = (unsigned int) ra;
+ *rb_ptr = (unsigned int) rb;
+
+ return 1; /* Success */
+ }
+ else
+ {
+ return 0; /* Failure */
+ }
+} /* or1k_analyse_l_sw () */
+
+
+
+
+/* Functions defining the architecture */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Determine the return convention used for a given type
+
+ Optionally, fetch or set the return value via "readbuf" or "writebuf"
+ respectively using "regcache" for the register values.
+
+ The OpenRISC 1000 returns scalar values via R11 and (for 64 bit values on
+ 32 bit architectures) R12. Structs and unions are returned by reference,
+ with the address in R11
+
+ The result returned is independent of the function type, so we ignore that.
+
+ Throughout use read_memory(), not target_read_memory(), since the address
+ may be invalid and we want an error reported (read_memory() is
+ target_read_memory() with error reporting).
+
+ @todo This implementation is labelled OR1K, but in fact is just for the 32
+ bit version, OR1K. This should be made explicit
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] functype The type of the function to be called (may be NULL)
+ @param[in] valtype The type of the entity to be returned
+ @param[in] regcache The register cache
+ @param[in] readbuf Buffer into which the return value should be written
+ @param[out] writebuf Buffer from which the return value should be written
+
+ @return The type of return value */
+/*---------------------------------------------------------------------------*/
+
+static enum return_value_convention
+or1k_return_value (struct gdbarch *gdbarch,
+ struct value *functype,
+ struct type *valtype,
+ struct regcache *regcache,
+ gdb_byte *readbuf,
+ const gdb_byte *writebuf)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ enum type_code rv_type = TYPE_CODE (valtype);
+ unsigned int rv_size = TYPE_LENGTH (valtype);
+ unsigned int bpw = (gdbarch_tdep (gdbarch))->bytes_per_word;
+
+ /* Deal with struct/union first. If this won't fit in a single register it
+ is returned in memory. Large (2 word) scalars are returned in r11 and r12
+ (this is a change from GCC 4.2.2, when they were apparently returned in
+ memory). */
+ if (((TYPE_CODE_STRUCT == rv_type) || (TYPE_CODE_UNION == rv_type)) &&
+ (rv_size > bpw))
+ {
+ if (readbuf)
+ {
+ ULONGEST tmp;
+
+ regcache_cooked_read_unsigned (regcache, OR1K_RV_REGNUM, &tmp);
+ read_memory (tmp, readbuf, rv_size);
+ }
+ if (writebuf)
+ {
+ ULONGEST tmp;
+
+ regcache_cooked_read_unsigned (regcache, OR1K_RV_REGNUM, &tmp);
+ write_memory (tmp, writebuf, rv_size);
+ }
+
+ return RETURN_VALUE_ABI_RETURNS_ADDRESS;
+ }
+
+ if (rv_size <= bpw)
+ {
+ /* up to one word scalars are returned in R11 */
+ if (readbuf)
+ {
+ ULONGEST tmp;
+
+ regcache_cooked_read_unsigned (regcache, OR1K_RV_REGNUM, &tmp);
+ store_unsigned_integer (readbuf, rv_size, byte_order, tmp);
+
+ }
+ if (writebuf)
+ {
+ gdb_byte buf[4]; /* TODO - fixed const! */
+ memset (buf, 0, sizeof (buf)); /* Zero pad if < bpw bytes */
+
+ if (BFD_ENDIAN_BIG == byte_order)
+ {
+ memcpy (buf + sizeof (buf) - rv_size, writebuf, rv_size);
+ }
+ else
+ {
+ memcpy (buf, writebuf, rv_size);
+ }
+
+ regcache_cooked_write (regcache, OR1K_RV_REGNUM, buf);
+ }
+ }
+ else
+ {
+ /* 2 word scalars are returned in r11/r12 (with the MS word in r11). */
+ if (readbuf)
+ {
+ ULONGEST tmp_lo;
+ ULONGEST tmp_hi;
+ ULONGEST tmp;
+
+ regcache_cooked_read_unsigned (regcache, OR1K_RV_REGNUM , &tmp_hi);
+ regcache_cooked_read_unsigned (regcache, OR1K_RV_REGNUM + 1, &tmp_lo);
+ tmp = (tmp_hi << (bpw * 8)) | tmp_lo;
+
+ store_unsigned_integer (readbuf, rv_size, byte_order, tmp);
+ }
+ if (writebuf)
+ {
+ gdb_byte buf_lo[4]; /* TODO - fixed const! */
+ gdb_byte buf_hi[4]; /* TODO - fixed const! */
+
+ memset (buf_lo, 0, sizeof (buf_lo)); /* Zero pad if < bpw bytes */
+ memset (buf_hi, 0, sizeof (buf_hi)); /* Zero pad if < bpw bytes */
+
+ /* This is cheating. We assume that we fit in 2 words exactly, which
+ wouldn't work if we had (say) a 6-byte scalar type on a big
+ endian architecture (with the OpenRISC 1000 usually is). */
+ memcpy (buf_hi, writebuf, rv_size - bpw);
+ memcpy (buf_lo, writebuf + bpw, bpw);
+
+ regcache_cooked_write (regcache, OR1K_RV_REGNUM, buf_hi);
+ regcache_cooked_write (regcache, OR1K_RV_REGNUM + 1, buf_lo);
+ }
+ }
+
+ return RETURN_VALUE_REGISTER_CONVENTION;
+
+} /* or1k_return_value() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Determine the instruction to use for a breakpoint.
+
+ Given the address at which to insert a breakpoint (bp_addr), what will
+ that breakpoint be?
+
+ For or1k, we have a breakpoint instruction. Since all or1k instructions
+ are 32 bits, this is all we need, regardless of address.
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] bp_addr The breakpoint address in question
+ @param[out] bp_size The size of instruction selected
+
+ @return The chosen breakpoint instruction */
+/*---------------------------------------------------------------------------*/
+
+static const gdb_byte *
+or1k_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR *bp_addr,
+ int *bp_size)
+{
+ static const gdb_byte breakpoint[] = OR1K_BRK_INSTR_STRUCT;
+
+ *bp_size = OR1K_INSTLEN;
+ return breakpoint;
+
+} /* or1k_breakpoint_from_pc() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Determine if we are executing a delay slot
+
+ Looks at the instruction at the previous instruction to see if it was one
+ with a delay slot. But it also has to be the address prior to NPC, because
+ we may have just taken an exception.
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] this_frame Information about THIS frame
+
+ @return 1 (true) if this instruction is executing a delay slot, 0 (false)
+ otherwise. */
+/*--------------------------------------------------------------------------*/
+
+static int
+or1k_single_step_through_delay( struct gdbarch *gdbarch,
+ struct frame_info *this_frame )
+{
+ struct regcache *regcache = get_current_regcache ();
+ ULONGEST val;
+ CORE_ADDR ppc;
+ CORE_ADDR npc;
+ CGEN_FIELDS tmp_fields;
+ const CGEN_INSN *insns;
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* Get and the previous and current instruction addresses. If they are not
+ adjacent, we cannot be in a delay slot. */
+ regcache_cooked_read_unsigned (regcache, OR1K_PPC_REGNUM, &val);
+ ppc = (CORE_ADDR) val;
+ regcache_cooked_read_unsigned (regcache, OR1K_NPC_REGNUM, &val);
+ npc = (CORE_ADDR) val;
+
+ if (0x4 != (npc - ppc))
+ {
+ return 0;
+ }
+
+ insns = cgen_lookup_insn (tdep->gdb_cgen_cpu_desc,
+ NULL,
+ or1k_fetch_instruction (gdbarch, ppc),
+ NULL,
+ 32,
+ &tmp_fields,
+ 0);
+
+ /* TODO: we should add a delay slot flag to the CGEN_INSN and remove
+ * this hard coded test. */
+ return ((CGEN_INSN_NUM(insns) == OR1K_INSN_L_J) ||
+ (CGEN_INSN_NUM(insns) == OR1K_INSN_L_JAL) ||
+ (CGEN_INSN_NUM(insns) == OR1K_INSN_L_JR) ||
+ (CGEN_INSN_NUM(insns) == OR1K_INSN_L_JALR) ||
+ (CGEN_INSN_NUM(insns) == OR1K_INSN_L_BNF) ||
+ (CGEN_INSN_NUM(insns) == OR1K_INSN_L_BF));
+
+} /* or1k_single_step_through_delay() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Read a pseudo register
+
+ Since we have no pseudo registers this is a null function for now.
+
+ @todo The floating point and vector registers ought to be done as
+ pseudo-registers.
+
+ @param[in] gdbarch The GDB architecture to consider
+ @param[in] regcache The cached register values as an array
+ @param[in] regnum The register to read
+ @param[out] buf A buffer to put the result in */
+/*---------------------------------------------------------------------------*/
+
+static enum register_status
+or1k_pseudo_register_read (struct gdbarch *gdbarch,
+ struct regcache *regcache,
+ int regnum,
+ gdb_byte *buf)
+{
+ return 0;
+} /* or1k_pseudo_register_read() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Write a pseudo register
+
+ Since we have no pseudo registers this is a null function for now.
+
+ @todo The floating point and vector registers ought to be done as
+ pseudo-registers.
+
+ @param[in] gdbarch The GDB architecture to consider
+ @param[in] regcache The cached register values as an array
+ @param[in] regnum The register to read
+ @param[in] buf A buffer with the value to write */
+/*---------------------------------------------------------------------------*/
+
+static void
+or1k_pseudo_register_write (struct gdbarch *gdbarch,
+ struct regcache *regcache,
+ int regnum,
+ const gdb_byte *buf)
+{
+ return;
+
+} /* or1k_pseudo_register_write() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Return the register name for the OpenRISC 1000 architecture
+
+ This version converted to ANSI C, made static and incorporates the static
+ table of register names (this is the only place it is referenced).
+
+ @todo The floating point and vector registers ought to be done as
+ pseudo-registers.
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] regnum The register number
+
+ @return The textual name of the register */
+/*---------------------------------------------------------------------------*/
+
+static const char *
+or1k_register_name (struct gdbarch *gdbarch,
+ int regnum)
+{
+ static char *or1k_gdb_reg_names[OR1K_TOTAL_NUM_REGS] =
+ {
+ /* general purpose registers */
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+
+ /* previous program counter, next program counter and status register */
+ "ppc", "npc", "sr"
+
+ /* Floating point and vector registers may appear as pseudo registers in
+ the future. */
+ };
+
+ return or1k_gdb_reg_names[regnum];
+
+} /* or1k_register_name() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Identify the type of a register
+
+ @todo I don't fully understand exactly what this does, but I think this
+ makes sense!
+
+ @param[in] arch The GDB architecture to consider
+ @param[in] regnum The register to identify
+
+ @return The type of the register */
+/*---------------------------------------------------------------------------*/
+
+static struct type *
+or1k_register_type (struct gdbarch *arch,
+ int regnum)
+{
+ static struct type *void_func_ptr = NULL;
+ static struct type *void_ptr = NULL;
+
+ /* Set up the static pointers once, the first time*/
+ if (NULL == void_func_ptr)
+ {
+ struct type *void_type = builtin_type (arch)->builtin_void;
+
+ void_ptr = lookup_pointer_type (void_type);
+ void_func_ptr = lookup_pointer_type (lookup_function_type (void_type));
+ }
+
+ if((regnum >= 0) && (regnum < OR1K_TOTAL_NUM_REGS))
+ {
+ switch (regnum)
+ {
+ case OR1K_PPC_REGNUM:
+ case OR1K_NPC_REGNUM:
+ return void_func_ptr; /* Pointer to code */
+
+ case OR1K_SP_REGNUM:
+ case OR1K_FP_REGNUM:
+ return void_ptr; /* Pointer to data */
+
+ default:
+ return builtin_type (arch)->builtin_uint32; /* Data */
+ }
+ }
+
+ internal_error (__FILE__, __LINE__,
+ _("or1k_register_type: illegal register number %d"), regnum);
+
+} /* or1k_register_type() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Handle the "info register" command
+
+ Print the identified register, unless it is -1, in which case print all
+ the registers. If all is 1 means all registers, otherwise only the core
+ GPRs.
+
+ @todo At present all registers are printed with the default method. Should
+ there be something special for FP registers?
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] file File handle for use with any custom I/O
+ @param[in] frame Frame info for use with custom output
+ @param[in] regnum Register of interest, or -1 if all registers
+ @param[in] all 1 if all means all, 0 if all means just GPRs
+
+ @return The aligned stack frame address */
+/*---------------------------------------------------------------------------*/
+
+static void
+or1k_registers_info (struct gdbarch *gdbarch,
+ struct ui_file *file,
+ struct frame_info *frame,
+ int regnum,
+ int all)
+{
+ if (-1 == regnum)
+ {
+ /* Do all (valid) registers */
+ unsigned int lim = all ? OR1K_NUM_REGS : OR1K_MAX_GPR_REGS;
+
+ for (regnum = 0; regnum < lim; regnum++) {
+ if ('\0' != *(or1k_register_name (gdbarch, regnum)))
+ {
+ or1k_registers_info (gdbarch, file, frame, regnum, all);
+ }
+ }
+ }
+ else
+ {
+ /* Do one specified register - if it is part of this architecture */
+ if ('\0' == *(or1k_register_name (gdbarch, regnum)))
+ {
+ error ("Not a valid register for the current processor type");
+ }
+ else
+ {
+ default_print_registers_info (gdbarch, file, frame, regnum, all);
+ }
+ }
+} /* or1k_registers_info() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Identify if a register belongs to a specified group
+
+ Return true if the specified register is a member of the specified
+ register group.
+
+ These are the groups of registers that can be displayed via "info reg".
+
+ @todo The Vector and Floating Point registers ought to be displayed as
+ pseudo-registers.
+
+ @param[in] gdbarch The GDB architecture to consider
+ @param[in] regnum The register to consider
+ @param[in] group The group to consider
+
+ @return True (1) if regnum is a member of group */
+/*---------------------------------------------------------------------------*/
+
+static int
+or1k_register_reggroup_p (struct gdbarch *gdbarch,
+ int regnum,
+ struct reggroup *group)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ /* All register group */
+ if (group == all_reggroup)
+ {
+ return ((regnum >= 0) &&
+ (regnum < OR1K_TOTAL_NUM_REGS) &&
+ (or1k_register_name (gdbarch, regnum)[0] != '\0'));
+ }
+
+ /* For now everything except the PC */
+ if (group == general_reggroup)
+ {
+ return ((regnum >= OR1K_ZERO_REGNUM) &&
+ (regnum < tdep->num_gpr_regs) &&
+ (regnum != OR1K_PPC_REGNUM) &&
+ (regnum != OR1K_NPC_REGNUM));
+ }
+
+ if (group == float_reggroup)
+ {
+ return 0; /* No float regs. */
+ }
+
+ if (group == vector_reggroup)
+ {
+ return 0; /* No vector regs. */
+ }
+
+ /* For any that are not handled above. */
+ return default_register_reggroup_p (gdbarch, regnum, group);
+
+} /* or1k_register_reggroup_p() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Is this one of the registers used for passing arguments?
+
+ These are r3-r8 in the API.
+
+ @param[in] regnum The register to consider
+
+ @return Non-zero (TRUE) if it is an argument register, zero (FALSE)
+ otherwise. */
+/*----------------------------------------------------------------------------*/
+static int
+or1k_is_arg_reg (unsigned int regnum)
+{
+ return (OR1K_FIRST_ARG_REGNUM <= regnum) && (regnum <= OR1K_LAST_ARG_REGNUM);
+
+} /* or1k_is_arg_reg () */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Is this a callee saved register?
+
+ These are r10, r12, r14, r16, r18, r20, r22, r24, r26, r28 and r30 in the
+ API.
+
+ @param[in] regnum The register to consider
+
+ @return Non-zero (TRUE) if it is a callee saved register, zero (FALSE)
+ otherwise. */
+/*----------------------------------------------------------------------------*/
+static int
+or1k_is_callee_saved_reg (unsigned int regnum)
+{
+ return (OR1K_FIRST_SAVED_REGNUM <= regnum) && (0 == regnum % 2);
+
+} /* or1k_is_callee_saved_reg () */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Skip a function prolog
+
+ If the input address, PC, is in a function prologue, return the address of
+ the end of the prologue, otherwise return the input address.
+
+ @see For details of the stack frame, see the function
+ or1k_frame_cache().
+
+ @note The old version of this function used to use skip_prologue_using_sal
+ to skip the prologue without checking if it had actually worked. It
+ doesn't for STABS, so we had better check for a valid result.
+
+ This function reuses the helper functions from or1k_frame_cache() to
+ locate the various parts of the prolog, any or all of which may be missing.
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] pc Current program counter
+
+ @return The address of the end of the prolog if the PC is in a function
+ prologue, otherwise the input address. */
+/*----------------------------------------------------------------------------*/
+static CORE_ADDR
+or1k_skip_prologue (struct gdbarch *gdbarch,
+ CORE_ADDR pc)
+{
+ CORE_ADDR start_pc;
+ CORE_ADDR addr;
+ uint32_t inst;
+
+ unsigned int ra, rb, rd; /* For instruction analysis */
+ int simm;
+
+ int frame_size = 0;
+
+ /* Try using SAL first if we have symbolic information available. This only
+ works for DWARF 2, not STABS. */
+ if (find_pc_partial_function (pc, NULL, &start_pc, NULL))
+ {
+ CORE_ADDR prologue_end = skip_prologue_using_sal( gdbarch, pc );
+
+ if (0 != prologue_end)
+ {
+ struct symtab_and_line prologue_sal = find_pc_line (start_pc, 0);
+ const char *debug_format = prologue_sal.symtab->debugformat;
+
+ if ((strlen ("dwarf") <= strlen (debug_format))
+ && (0 == strncasecmp ("dwarf", debug_format, strlen ("dwarf"))))
+ {
+ return (prologue_end > pc) ? prologue_end : pc;
+ }
+ }
+ }
+
+ /* Look to see if we can find any of the standard prologue sequence. All
+ quite difficult, since any or all of it may be missing. So this is just a
+ best guess! */
+ addr = pc; /* Where we have got to */
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ /* Look for the new stack pointer being set up. */
+ if (or1k_analyse_l_addi (inst, &rd, &ra, &simm) &&
+ (OR1K_SP_REGNUM == rd) && (OR1K_SP_REGNUM == ra) &&
+ (simm < 0) && (0 == (simm % 4)))
+ {
+ frame_size = -simm;
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+ }
+
+ /* Look for the frame pointer being manipulated. */
+ if (or1k_analyse_l_sw (inst, &simm, &ra, &rb) &&
+ (OR1K_SP_REGNUM == ra) && (OR1K_FP_REGNUM == rb) &&
+ (simm >= 0) && (0 == (simm % 4)))
+ {
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ gdb_assert (or1k_analyse_l_addi (inst, &rd, &ra, &simm) &&
+ (OR1K_FP_REGNUM == rd) && (OR1K_SP_REGNUM == ra) &&
+ (simm == frame_size));
+
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+ }
+
+ /* Look for the link register being saved */
+ if (or1k_analyse_l_sw (inst, &simm, &ra, &rb) &&
+ (OR1K_SP_REGNUM == ra) && (OR1K_LR_REGNUM == rb) &&
+ (simm >= 0) && (0 == (simm % 4)))
+ {
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+ }
+
+ /* Look for arguments or callee-saved register being saved. The register
+ must be one of the arguments (r3-r8) or the 10 callee saved registers
+ (r10, r12, r14, r16, r18, r20, r22, r24, r26, r28, r30). The base
+ register must be the FP (for the args) or the SP (for the callee_saved
+ registers). */
+ while (1)
+ {
+ if (or1k_analyse_l_sw (inst, &simm, &ra, &rb) &&
+ (((OR1K_FP_REGNUM == ra) && or1k_is_arg_reg (rb)) ||
+ ((OR1K_SP_REGNUM == ra) && or1k_is_callee_saved_reg (rb))) &&
+ (0 == (simm % 4)))
+ {
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+ }
+ else
+ {
+ /* Nothing else to look for. We have found the end of the prologue. */
+ return addr;
+ }
+ }
+} /* or1k_skip_prologue() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Align the stack frame
+
+ OpenRISC 1000 uses a falling stack frame, so this aligns down to the
+ nearest 8 bytes. Useful when we'be building a dummy frame.
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] sp Current stack pointer
+
+ @return The aligned stack frame address */
+/*---------------------------------------------------------------------------*/
+
+static CORE_ADDR
+or1k_frame_align (struct gdbarch *gdbarch,
+ CORE_ADDR sp)
+{
+ return align_down (sp, OR1K_STACK_ALIGN);
+
+} /* or1k_frame_align() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Unwind the program counter from a stack frame
+
+ This just uses the built in frame unwinder
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] next_frame Frame info for the NEXT frame
+
+ @return The program counter for THIS frame */
+/*---------------------------------------------------------------------------*/
+
+static CORE_ADDR
+or1k_unwind_pc (struct gdbarch *gdbarch,
+ struct frame_info *next_frame)
+{
+ CORE_ADDR pc;
+
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, "or1k_unwind_pc, next_frame=%d\n",
+ frame_relative_level (next_frame));
+ }
+
+ pc = frame_unwind_register_unsigned (next_frame, OR1K_NPC_REGNUM);
+
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, "or1k_unwind_pc, pc=0x%p\n", (void *) pc);
+ }
+
+ return pc;
+
+} /* or1k_unwind_pc() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Unwind the stack pointer from a stack frame
+
+ This just uses the built in frame unwinder
+
+ @param[in] gdbarch The GDB architecture being used
+ @param[in] next_frame Frame info for the NEXT frame
+
+ @return The stack pointer for THIS frame */
+/*---------------------------------------------------------------------------*/
+
+static CORE_ADDR
+or1k_unwind_sp (struct gdbarch *gdbarch,
+ struct frame_info *next_frame)
+{
+ CORE_ADDR sp;
+
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, "or1k_unwind_sp, next_frame=%d\n",
+ frame_relative_level (next_frame));
+ }
+
+ sp = frame_unwind_register_unsigned (next_frame, OR1K_SP_REGNUM);
+
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, "or1k_unwind_sp, sp=0x%p\n", (void *) sp);
+ }
+
+ return sp;
+
+} /* or1k_unwind_sp() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Create a dummy stack frame
+
+ The arguments are placed in registers and/or pushed on the stack as per the
+ OR1K ABI.
+
+ @param[in] gdbarch The architecture to use
+ @param[in] function Pointer to the function that will be called
+ @param[in] regcache The register cache to use
+ @param[in] bp_addr Breakpoint address
+ @param[in] nargs Number of ags to push
+ @param[in] args The arguments
+ @param[in] sp The stack pointer
+ @param[in] struct_return True (1) if this returns a structure
+ @param[in] struct_addr Address for returning structures
+
+ @return The updated stack pointer */
+/*---------------------------------------------------------------------------*/
+
+static CORE_ADDR
+or1k_push_dummy_call (struct gdbarch *gdbarch,
+ struct value *function,
+ struct regcache *regcache,
+ CORE_ADDR bp_addr,
+ int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
+{
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+
+ int argreg;
+ int argnum;
+ int first_stack_arg;
+ int stack_offset = 0;
+
+ unsigned int bpa = (gdbarch_tdep (gdbarch))->bytes_per_address;
+ unsigned int bpw = (gdbarch_tdep (gdbarch))->bytes_per_word;
+
+ /* Return address */
+ regcache_cooked_write_unsigned (regcache, OR1K_LR_REGNUM, bp_addr);
+
+ /* Register for the next argument */
+ argreg = OR1K_FIRST_ARG_REGNUM;
+
+ /* Location for a returned structure. This is passed as a silent first
+ argument. */
+
+ if (struct_return)
+ {
+ regcache_cooked_write_unsigned (regcache, OR1K_FIRST_ARG_REGNUM,
+ struct_addr);
+ argreg++;
+ }
+
+ /* Put as many args as possible in registers */
+ for (argnum = 0; argnum < nargs; argnum++)
+ {
+ char *val;
+ char valbuf[sizeof (ULONGEST) ];
+
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (value_type (arg));
+ int len = arg_type->length;
+ enum type_code typecode = arg_type->main_type->code;
+
+ /* Handle the different argument types. */
+ if((TYPE_CODE_STRUCT == typecode) || (TYPE_CODE_UNION == typecode))
+ {
+ /* The ABI passes all structures by reference, so get its address. */
+ store_unsigned_integer (valbuf, bpa, byte_order, value_address (arg));
+ len = bpa;
+ val = valbuf;
+ }
+ else
+ {
+ /* Everything else, we just get the value. */
+ val = (char *) value_contents (arg);
+ }
+
+ /* Stick the value in a register */
+ if(len > bpw)
+ {
+ /* Big scalars use two registers, but need NOT be pair aligned. This
+ code breaks if we can have quad-word scalars (e.g. long
+ double). */
+
+ if (argreg <= (OR1K_LAST_ARG_REGNUM - 1))
+ {
+ ULONGEST regval = extract_unsigned_integer (val, len, byte_order);
+
+ unsigned int bits_per_word = bpw * 8;
+ ULONGEST mask = (((ULONGEST) 1) << bits_per_word) - 1;
+ ULONGEST lo = regval & mask;
+ ULONGEST hi = regval >> bits_per_word;
+
+ gdb_assert (len <= (bpw * 2));
+
+ regcache_cooked_write_unsigned (regcache, argreg, hi);
+ regcache_cooked_write_unsigned (regcache, argreg + 1, lo);
+ argreg += 2;
+ }
+ else
+ {
+ /* Run out of regs */
+ break;
+ }
+ }
+ else if (argreg <= OR1K_LAST_ARG_REGNUM)
+ {
+ /* Smaller scalars fit in a single register */
+ regcache_cooked_write_unsigned (regcache, argreg,
+ extract_unsigned_integer (val, len,
+ byte_order));
+ argreg++;
+ }
+ else
+ {
+ /* Run out of regs */
+ break;
+ }
+ }
+
+ first_stack_arg = argnum;
+
+ /* If we get here with argnum < nargs, then arguments remain to be placed on
+ the stack. This is tricky, since they must be pushed in reverse order and
+ the stack in the end must be aligned. The only solution is to do it in
+ two stages, the first to compute the stack size, the second to save the
+ args. */
+
+ for (argnum = first_stack_arg; argnum < nargs; argnum++)
+ {
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (value_type (arg));
+ int len = arg_type->length;
+ enum type_code typecode = arg_type->main_type->code;
+
+ if((TYPE_CODE_STRUCT == typecode) || (TYPE_CODE_UNION == typecode))
+ {
+ /* Structures are passed as addresses */
+ sp -= bpa;
+ }
+ else
+ {
+ /* Big scalars use more than one word. Code here allows for future
+ quad-word entities (e.g. long double) */
+ sp -= ((len + bpw - 1) / bpw) * bpw;
+ }
+ }
+
+ sp = gdbarch_frame_align (gdbarch, sp);
+ stack_offset = 0;
+
+ /* Push the remaining args on the stack */
+ for (argnum = first_stack_arg; argnum < nargs; argnum++)
+ {
+ char *val;
+ char valbuf[sizeof (ULONGEST) ];
+
+ struct value *arg = args[argnum];
+ struct type *arg_type = check_typedef (value_type (arg));
+ int len = arg_type->length;
+ enum type_code typecode = arg_type->main_type->code;
+
+ /* The EABI passes structures that do not fit in a register by
+ reference. In all other cases, pass the structure by value. */
+ if((TYPE_CODE_STRUCT == typecode) || (TYPE_CODE_UNION == typecode))
+ {
+ store_unsigned_integer (valbuf, bpa, byte_order, value_address (arg));
+ len = bpa;
+ val = valbuf;
+ }
+ else
+ {
+ val = (char *) value_contents (arg);
+ }
+
+ gdb_assert (len <= (bpw * 2));
+
+ write_memory (sp + stack_offset, val, len);
+ stack_offset += ((len + bpw - 1) / bpw) * bpw;
+ }
+
+ /* Save the updated stack pointer */
+ regcache_cooked_write_unsigned (regcache, OR1K_SP_REGNUM, sp);
+
+ return sp;
+
+} /* or1k_push_dummy_call() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Return the frame ID for a dummy stack frame
+
+ Tear down a dummy frame created by or1k_push_dummy_call(). This data has to
+ be constructed manually from the data in our hand.
+
+ The stack pointer and program counter can be obtained from the frame info.
+
+ @param[in] gdbarch The architecture to use
+ @param[in] this_frame Information about this frame
+
+ @return Frame ID of this frame */
+/*---------------------------------------------------------------------------*/
+
+static struct frame_id
+or1k_dummy_id (struct gdbarch *gdbarch,
+ struct frame_info *this_frame)
+{
+ return frame_id_build (get_frame_sp (this_frame), get_frame_pc (this_frame));
+
+} /* or1k_dummy_id() */
+
+
+
+
+/* Support functions for frame handling */
+
+/* -------------------------------------------------------------------------- */
+/*!Initialize a prologue cache
+
+ This function is changed from its GDB 6.8 version (named
+ or1k_frame_unwind_cache), in that it is based on THIS frame, not the NEXT
+ frame.
+
+ We build a cache, saying where registers of the PREV frame can be found
+ from the data so far set up in this THIS.
+
+ We also compute a unique ID for this frame, based on the function start
+ address and the stack pointer (as it will be, even if it has yet to be
+ computed.
+
+ STACK FORMAT
+ ============
+
+ The OR1K has a falling stack frame and a simple prolog. The Stack pointer
+ is R1 and the frame pointer R2. The frame base is therefore the address
+ held in R2 and the stack pointer (R1) is the frame base of the NEXT frame.
+
+ @verbatim
+ l.addi r1,r1,-frame_size # SP now points to end of new stack frame
+ @endverbatim
+
+ The stack pointer may not be set up in a frameless function (e.g. a simple
+ leaf function).
+
+ @verbatim
+ l.sw fp_loc(r1),r2 # old FP saved in new stack frame
+ l.addi r2,r1,frame_size # FP now points to base of new stack frame
+ @endverbatim
+
+ The frame pointer is not necessarily saved right at the end of the stack
+ frame - OR1K saves enough space for any args to called functions right at
+ the end (this is a difference from the Architecture Manual).
+
+ @verbatim
+ l.sw lr_loc(r1),r9 # Link (return) address
+ @endverbatim
+
+ The link register is usally saved at fp_loc - 4. It may not be saved at all
+ in a leaf function.
+
+ @verbatim
+ l.sw reg_loc(r1),ry # Save any callee saved regs
+ @endverbatim
+
+ The offsets x for the callee saved registers generally (always?) rise in
+ increments of 4, starting at fp_loc + 4. If the frame pointer is omitted
+ (an option to GCC), then it may not be saved at all. There may be no callee
+ saved registers.
+
+ So in summary none of this may be present. However what is present seems
+ always to follow this fixed order, and occur before any substantive code
+ (it is possible for GCC to have more flexible scheduling of the prologue,
+ but this does not seem to occur for OR1K).
+
+ ANALYSIS
+ ========
+
+ This prolog is used, even for -O3 with GCC.
+
+ All this analysis must allow for the possibility that the PC is in the
+ middle of the prologue. Data in the cache should only be set up insofar as
+ it has been computed.
+
+ HOWEVER. The frame_id must be created with the SP *as it will be* at the
+ end of the Prologue. Otherwise a recursive call, checking the frame with
+ the PC at the start address will end up with the same frame_id as the
+ caller.
+
+ A suite of "helper" routines are used, allowing reuse for
+ or1k_skip_prologue().
+
+ Reportedly, this is only valid for frames less than 0x7fff in size.
+
+ @param[in] this_frame Our stack frame.
+ @param[in,out] prologue_cache The prologue cache. If not supplied, we
+ build it.
+
+ @return The prolog cache (duplicates the return through the argument) */
+/* ---------------------------------------------------------------------------*/
+static struct trad_frame_cache *
+or1k_frame_cache (struct frame_info *this_frame,
+ void **prologue_cache)
+{
+ struct gdbarch *gdbarch;
+ struct trad_frame_cache *info;
+
+ CORE_ADDR this_pc;
+ CORE_ADDR this_sp;
+ CORE_ADDR this_sp_for_id;
+ int frame_size = 0;
+
+ CORE_ADDR start_addr;
+ CORE_ADDR end_addr;
+
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog,
+ "or1k_frame_cache, prologue_cache = 0x%p\n",
+ *prologue_cache);
+ }
+
+ /* Nothing to do if we already have this info */
+ if (NULL != *prologue_cache)
+ {
+ return *prologue_cache;
+ }
+
+ /* Get a new prologue cache and populate it with default values */
+ info = trad_frame_cache_zalloc (this_frame);
+ *prologue_cache = info;
+
+ /* Find the start address of THIS function (which is a NORMAL frame, even if
+ the NEXT frame is the sentinel frame) and the end of its prologue. */
+ this_pc = get_frame_pc (this_frame);
+ find_pc_partial_function (this_pc, NULL, &start_addr, NULL);
+
+ /* Get the stack pointer if we have one (if there's no process executing yet
+ we won't have a frame. */
+ this_sp = (NULL == this_frame) ? 0 :
+ get_frame_register_unsigned (this_frame,
+ OR1K_SP_REGNUM);
+
+ /* Return early if GDB couldn't find the function. */
+ if (start_addr == 0)
+ {
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " couldn't find function\n");
+ }
+
+ /* JPB: 28-Apr-11. This is a temporary patch, to get round GDB crashing
+ right at the beginning. Build the frame ID as best we can. */
+ trad_frame_set_id (info, frame_id_build (this_sp, this_pc));
+
+ return info;
+ }
+
+
+ /* The default frame base of THIS frame (for ID purposes only - frame base
+ is an overloaded term) is its stack pointer. For now we use the value of
+ the SP register in THIS frame. However if the PC is in the prologue of
+ THIS frame, before the SP has been set up, then the value will actually
+ be that of the PREV frame, and we'll need to adjust it later. */
+ trad_frame_set_this_base (info, this_sp);
+ this_sp_for_id = this_sp;
+
+ /* The default is to find the PC of the PREVIOUS frame in the link register
+ of this frame. This may be changed if we find the link register was saved
+ on the stack. */
+ trad_frame_set_reg_realreg (info, OR1K_NPC_REGNUM, OR1K_LR_REGNUM);
+
+ /* We should only examine code that is in the prologue. This is all code up
+ to (but not including) end_addr. We should only populate the cache while
+ the address is up to (but not including) the PC or end_addr, whichever is
+ first. */
+ gdbarch = get_frame_arch (this_frame);
+ end_addr = or1k_skip_prologue (gdbarch, start_addr);
+
+ /* All the following analysis only occurs if we are in the prologue and have
+ executed the code. Check we have a sane prologue size, and if zero we
+ are frameless and can give up here. */
+ if (end_addr < start_addr)
+ {
+ fatal ("end addr 0x%08x is less than start addr 0x%08x\n",
+ (unsigned int) end_addr, (unsigned int) start_addr);
+ }
+
+ if (end_addr == start_addr)
+ {
+ frame_size = 0;
+ }
+ else
+ {
+ /* have a frame. Look for the various components */
+ CORE_ADDR addr = start_addr; /* Where we have got to */
+ uint32_t inst = or1k_fetch_instruction (gdbarch, addr);
+
+ unsigned int ra, rb, rd; /* For instruction analysis */
+ int simm;
+
+ /* Look for the new stack pointer being set up. */
+ if (or1k_analyse_l_addi (inst, &rd, &ra, &simm) &&
+ (OR1K_SP_REGNUM == rd) && (OR1K_SP_REGNUM == ra) &&
+ (simm < 0) && (0 == (simm % 4)))
+ {
+ frame_size = -simm;
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ /* If the PC has not actually got to this point, then the frame base
+ will be wrong, and we adjust it.
+
+ If we are past this point, then we need to populate the stack
+ accoringly. */
+ if (this_pc <= addr)
+ {
+ /* Only do if executing */
+ if (0 != this_sp)
+ {
+ this_sp_for_id = this_sp + frame_size;
+ trad_frame_set_this_base (info, this_sp_for_id);
+ }
+ }
+ else
+ {
+ /* We are past this point, so the stack pointer of the PREV
+ frame is frame_size greater than the stack pointer of THIS
+ frame. */
+ trad_frame_set_reg_value (info, OR1K_SP_REGNUM,
+ this_sp + frame_size);
+ }
+ }
+
+ /* From now on we are only populating the cache, so we stop once we get
+ to either the end OR the current PC. */
+ end_addr = (this_pc < end_addr) ? this_pc : end_addr;
+
+ /* Look for the frame pointer being manipulated. */
+ if ((addr < end_addr) &&
+ or1k_analyse_l_sw (inst, &simm, &ra, &rb) &&
+ (OR1K_SP_REGNUM == ra) && (OR1K_FP_REGNUM == rb) &&
+ (simm >= 0) && (0 == (simm % 4)))
+ {
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ /* At this stage, we can find the frame pointer of the PREVIOUS
+ frame on the stack of the current frame. */
+ trad_frame_set_reg_addr (info, OR1K_FP_REGNUM, this_sp + simm);
+
+ /* Look for the new frame pointer being set up */
+ if (addr < end_addr)
+ {
+ gdb_assert (or1k_analyse_l_addi (inst, &rd, &ra, &simm) &&
+ (OR1K_FP_REGNUM == rd) && (OR1K_SP_REGNUM == ra) &&
+ (simm == frame_size));
+
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ /* If we have got this far, the stack pointer of the PREVIOUS
+ frame is the frame pointer of THIS frame. */
+ trad_frame_set_reg_realreg (info, OR1K_SP_REGNUM, OR1K_FP_REGNUM);
+ }
+ }
+
+ /* Look for the link register being saved */
+ if ((addr < end_addr) &&
+ or1k_analyse_l_sw (inst, &simm, &ra, &rb) &&
+ (OR1K_SP_REGNUM == ra) && (OR1K_LR_REGNUM == rb) &&
+ (simm >= 0) && (0 == (simm % 4)))
+ {
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ /* If the link register is saved in the THIS frame, it holds the
+ value of the PC in the PREVIOUS frame. This overwrites the
+ previous information about finding the PC in the link
+ register. */
+ trad_frame_set_reg_addr (info, OR1K_NPC_REGNUM, this_sp + simm);
+ }
+
+ /* Look for arguments or callee-saved register being saved. The register
+ must be one of the arguments (r3-r8) or the 10 callee saved registers
+ (r10, r12, r14, r16, r18, r20, r22, r24, r26, r28, r30). The base
+ register must be the FP (for the args) or the SP (for the
+ callee_saved registers). */
+ while (addr < end_addr)
+ {
+ if (or1k_analyse_l_sw (inst, &simm, &ra, &rb) &&
+ (((OR1K_FP_REGNUM == ra) && or1k_is_arg_reg (rb)) ||
+ ((OR1K_SP_REGNUM == ra) && or1k_is_callee_saved_reg (rb))) &&
+ (0 == (simm % 4)))
+ {
+ addr += OR1K_INSTLEN;
+ inst = or1k_fetch_instruction (gdbarch, addr);
+
+ /* The register in the PREVIOUS frame can be found at this
+ location in THIS frame */
+ trad_frame_set_reg_addr (info, rb, this_sp + simm);
+ }
+ else
+ {
+ break; /* Not a register save instruction */
+ }
+ }
+ }
+
+ /* Build the frame ID */
+ trad_frame_set_id (info, frame_id_build (this_sp_for_id, start_addr));
+
+ if (frame_debug)
+ {
+ fprintf_unfiltered (gdb_stdlog, " this_sp_for_id = 0x%p\n",
+ (void *) this_sp_for_id);
+ fprintf_unfiltered (gdb_stdlog, " start_addr = 0x%p\n",
+ (void *) start_addr);
+ }
+
+ return info;
+
+} /* or1k_frame_cache() */
+
+
+/* -------------------------------------------------------------------------- */
+/*!Find the frame ID of this frame
+
+ This function has changed since GDB 6.8 to use THIS frame, rather than the
+ NEXT frame.
+
+ Given a GDB frame, return its frame_id.
+
+ @param[in] this_frame Our frame, for which the ID is wanted.
+ @param[in] prologue_cache Any cached prologue for THIS function.
+ @param[out] this_id Frame ID of our own frame.
+
+ @return Frame ID for THIS frame */
+/* ------------------------------------------------------------------------- */
+static void
+or1k_frame_this_id (struct frame_info *this_frame,
+ void **prologue_cache,
+ struct frame_id *this_id)
+{
+ struct trad_frame_cache *info =
+ or1k_frame_cache (this_frame, prologue_cache);
+
+ trad_frame_get_id (info, this_id);
+
+} /* or1k_frame_this_id() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Get a register from the PREVIOUS frame
+
+ This function has changed from GDB 6.8. It now takes a reference to THIS
+ frame, not the NEXT frame. It returns it results via a structure, not its
+ argument list.
+
+ Given a pointer to the THIS frame, return the details of a register in the
+ PREVIOUS frame.
+
+ @param[in] this_frame The stack frame under consideration
+ @param[in] prologue_cache Any cached prologue associated with THIS frame,
+ which may therefore tell us about registers in
+ the PREVIOUS frame.
+ @param[in] regnum The register of interest in the PREVIOUS frame
+
+ @return A value structure representing the register. */
+/* -------------------------------------------------------------------------- */
+static struct value *
+or1k_frame_prev_register (struct frame_info *this_frame,
+ void **prologue_cache,
+ int regnum)
+{
+ struct trad_frame_cache *info = or1k_frame_cache (this_frame,
+ prologue_cache);
+
+ return trad_frame_get_register (info, this_frame, regnum);
+
+} /* or1k_frame_prev_register() */
+
+
+/* -------------------------------------------------------------------------- */
+/*!Structure defining the OR1K frame unwind functions
+
+ Must be global (to this file), since referred to by multiple functions.
+
+ Since we are the fallback unwinder, we use the default frame sniffer, which
+ always accepts the frame
+
+ This applies to NORMAL frames only. We provide the following functions.
+ - to give the ID of THIS frame
+ - to give the details of a register in PREVIOUS frame
+ - a frame sniffer. */
+/* -------------------------------------------------------------------------- */
+static const struct frame_unwind or1k_frame_unwind = {
+ .type = NORMAL_FRAME,
+ .stop_reason = default_frame_unwind_stop_reason,
+ .this_id = or1k_frame_this_id,
+ .prev_register = or1k_frame_prev_register,
+ .unwind_data = NULL,
+ .sniffer = default_frame_sniffer,
+ .dealloc_cache = NULL,
+ .prev_arch = NULL
+};
+
+
+#if 0
+/*----------------------------------------------------------------------------*/
+/*!Return the base address of the frame
+
+ The implementations has changed since GDB 6.8, since we are now provided
+ with the address of THIS frame, rather than the NEXT frame.
+
+ For the OR1K, the base address is the frame pointer
+
+ @param[in] this_frame The current stack frame.
+ @param[in] prologue_cache Any cached prologue for THIS function.
+
+ @return The frame base address */
+/*---------------------------------------------------------------------------*/
+
+static CORE_ADDR
+or1k_frame_base_address (struct frame_info *this_frame,
+ void **prologue_cache)
+{
+ return (CORE_ADDR) get_frame_register_unsigned (this_frame, OR1K_FP_REGNUM);
+
+} /* or1k_frame_base_address() */
+
+
+/* -------------------------------------------------------------------------- */
+/*!Identify our frame base sniffer functions
+
+ This function just identifies our family of frame sniffing functions.
+
+ @param[in] this_frame The frame of THIS function. Not used here.
+
+ @return A pointer to a struct identifying the frame base sniffing
+ functions. */
+/* -------------------------------------------------------------------------- */
+static const struct frame_base *
+or1k_frame_base_sniffer (struct frame_info *this_frame)
+{
+ /* Structure defining how the frame base is to be identified. */
+ static const struct frame_base or1k_frame_base =
+ {
+ .unwind = &or1k_frame_unwind,
+ .this_base = or1k_frame_base_address,
+ .this_locals = or1k_frame_base_address,
+ .this_args = or1k_frame_base_address
+ };
+
+ return &or1k_frame_base;
+
+} /* or1k_frame_base_sniffer () */
+#endif
+
+
+/* -------------------------------------------------------------------------- */
+/*!Return information needed to handle a core file.
+
+ We put together a regset structure that tells the system how to transfer
+ registers to and from a core file image.
+
+ @param[in] gdbarch The GDB architecture we are using.
+ @param[in] sect_name The name of the section being considered.
+ @param[in] sect_size The size of the section being considered.
+
+ @return A regset structure for the section, or NULL if none is available. */
+/* -------------------------------------------------------------------------- */
+static const struct regset *
+or1k_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name,
+ size_t sect_size)
+{
+ printf ("sect_name \"%s\", sect_size %d\n", sect_name, sect_size);
+ return NULL;
+
+} /* or1k_regset_from_core_section () */
+
+
+/* -------------------------------------------------------------------------- */
+/*!Architecture initialization for OpenRISC 1000
+
+ Looks for a candidate architecture in the list of architectures supplied
+ using the info supplied. If none match, create a new architecture.
+
+ @param[in] info Information about the target architecture
+ @param[in] arches The list of currently know architectures
+
+ @return A structure describing the target architecture */
+/* -------------------------------------------------------------------------- */
+static struct gdbarch *
+or1k_gdbarch_init (struct gdbarch_info info,
+ struct gdbarch_list *arches)
+{
+ static struct frame_base or1k_frame_base;
+ struct gdbarch *gdbarch;
+ struct gdbarch_tdep *tdep;
+ const struct bfd_arch_info *binfo;
+
+ /* Find a candidate among the list of pre-declared architectures. */
+ arches = gdbarch_list_lookup_by_info (arches, &info);
+ if (NULL != arches)
+ {
+ return arches->gdbarch;
+ }
+
+ /* None found, create a new architecture from the information
+ provided. Can't initialize all the target dependencies until we actually
+ know which target we are talking to, but put in some defaults for now. */
+
+ binfo = info.bfd_arch_info;
+ tdep = xmalloc (sizeof *tdep);
+ tdep->num_matchpoints = OR1K_MAX_MATCHPOINTS;
+ tdep->num_gpr_regs = OR1K_MAX_GPR_REGS;
+ tdep->bytes_per_word = binfo->bits_per_word / binfo->bits_per_byte;
+ tdep->bytes_per_address = binfo->bits_per_address / binfo->bits_per_byte;
+ gdbarch = gdbarch_alloc (&info, tdep);
+
+ /* Target data types. */
+ set_gdbarch_short_bit (gdbarch, 16);
+ set_gdbarch_int_bit (gdbarch, 32);
+ set_gdbarch_long_bit (gdbarch, 32);
+ set_gdbarch_long_long_bit (gdbarch, 64);
+ set_gdbarch_float_bit (gdbarch, 32);
+ set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
+ set_gdbarch_double_bit (gdbarch, 64);
+ set_gdbarch_double_format (gdbarch, floatformats_ieee_double);
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_long_double_format (gdbarch, floatformats_ieee_double);
+ set_gdbarch_ptr_bit (gdbarch, binfo->bits_per_address);
+ set_gdbarch_addr_bit (gdbarch, binfo->bits_per_address);
+ set_gdbarch_char_signed (gdbarch, 1);
+
+ /* Information about the target architecture */
+ set_gdbarch_return_value (gdbarch, or1k_return_value);
+ set_gdbarch_breakpoint_from_pc (gdbarch, or1k_breakpoint_from_pc);
+ set_gdbarch_have_nonsteppable_watchpoint
+ (gdbarch, 1);
+
+ set_gdbarch_print_insn (gdbarch, print_insn_or1k);
+
+ /* Register architecture */
+ set_gdbarch_pseudo_register_read (gdbarch, or1k_pseudo_register_read);
+ set_gdbarch_pseudo_register_write (gdbarch, or1k_pseudo_register_write);
+ set_gdbarch_num_regs (gdbarch, OR1K_NUM_REGS);
+ set_gdbarch_num_pseudo_regs (gdbarch, OR1K_NUM_PSEUDO_REGS);
+ set_gdbarch_sp_regnum (gdbarch, OR1K_SP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, OR1K_NPC_REGNUM);
+ set_gdbarch_ps_regnum (gdbarch, OR1K_SR_REGNUM);
+ set_gdbarch_deprecated_fp_regnum (gdbarch, OR1K_FP_REGNUM);
+
+ /* Functions to supply register information */
+ set_gdbarch_register_name (gdbarch, or1k_register_name);
+ set_gdbarch_register_type (gdbarch, or1k_register_type);
+ set_gdbarch_print_registers_info (gdbarch, or1k_registers_info);
+ set_gdbarch_register_reggroup_p (gdbarch, or1k_register_reggroup_p);
+
+ /* Functions to analyse frames */
+ set_gdbarch_skip_prologue (gdbarch, or1k_skip_prologue);
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_frame_align (gdbarch, or1k_frame_align);
+ set_gdbarch_frame_red_zone_size (gdbarch, OR1K_FRAME_RED_ZONE_SIZE);
+
+ /* Functions to access frame data */
+ set_gdbarch_unwind_pc (gdbarch, or1k_unwind_pc);
+ set_gdbarch_unwind_sp (gdbarch, or1k_unwind_sp);
+
+ /* Functions handling dummy frames */
+ set_gdbarch_push_dummy_call (gdbarch, or1k_push_dummy_call);
+ set_gdbarch_dummy_id (gdbarch, or1k_dummy_id);
+
+#if 0
+ /* Set up sniffers for the frame base. Use DWARF debug info if available,
+ otherwise use our own sniffer. */
+ frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer);
+ frame_base_append_sniffer (gdbarch, or1k_frame_base_sniffer);
+#endif
+
+ /* Handle core files */
+ set_gdbarch_regset_from_core_section (gdbarch, or1k_regset_from_core_section);
+
+ /* Frame unwinders. Use DWARF debug info if available, otherwise use our
+ own unwinder. */
+ dwarf2_append_unwinders (gdbarch);
+ frame_unwind_append_unwinder (gdbarch, &or1k_frame_unwind);
+
+ /* Get a CGEN CPU descriptor for this architecture. */
+ {
+
+ const char *mach_name = binfo->printable_name;
+ enum cgen_endian endian = (info.byte_order == BFD_ENDIAN_BIG
+ ? CGEN_ENDIAN_BIG
+ : CGEN_ENDIAN_LITTLE);
+
+ tdep->gdb_cgen_cpu_desc = or1k_cgen_cpu_open (CGEN_CPU_OPEN_BFDMACH, mach_name,
+ CGEN_CPU_OPEN_ENDIAN, endian,
+ CGEN_CPU_OPEN_END);
+
+ or1k_cgen_init_asm (tdep->gdb_cgen_cpu_desc);
+ }
+
+ /* If this mach as delay slot */
+ if (binfo->mach == bfd_mach_or1k)
+ {
+ set_gdbarch_single_step_through_delay
+ (gdbarch, or1k_single_step_through_delay);
+ }
+
+ return gdbarch;
+
+} /* or1k_gdbarch_init() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Dump the target specific data for this architecture
+
+ @param[in] gdbarch The architecture of interest
+ @param[in] file Where to dump the data */
+/*---------------------------------------------------------------------------*/
+
+static void
+or1k_dump_tdep (struct gdbarch *gdbarch,
+ struct ui_file *file)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+
+ if (NULL == tdep)
+ {
+ return; /* Nothing to report */
+ }
+
+ fprintf_unfiltered (file, "or1k_dump_tdep: %d matchpoints available\n",
+ tdep->num_matchpoints);
+ fprintf_unfiltered (file, "or1k_dump_tdep: %d general purpose registers\n",
+ tdep->num_gpr_regs);
+ fprintf_unfiltered (file, "or1k_dump_tdep: %d bytes per word\n",
+ tdep->bytes_per_word);
+ fprintf_unfiltered (file, "or1k_dump_tdep: %d bytes per address\n",
+ tdep->bytes_per_address);
+
+} /* or1k_dump_tdep() */
+
+
+
+/* Functions to add extra commands to GDB */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Returns a special purpose register group name
+
+ @param[in] group The SPR group number
+
+ @return The SPR name (pointer to the name argument) */
+/*---------------------------------------------------------------------------*/
+
+static const char *
+or1k_spr_group_name (int group)
+{
+ static const char *or1k_group_names[OR1K_NUM_SPGS] =
+ {
+ "SYS",
+ "DMMU",
+ "IMMU",
+ "DCACHE",
+ "ICACHE",
+ "MAC",
+ "DEBUG",
+ "PERF",
+ "POWER",
+ "PIC",
+ "TIMER",
+ "FPU"
+ };
+
+ if ((0 <= group) && (group < OR1K_NUM_SPGS))
+ {
+ return or1k_group_names[group];
+ }
+ else
+ {
+ return "";
+ }
+} /* or1k_spr_group_name() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Returns a special purpose register name
+
+ @param[in] group The SPR group
+ @param[in] index The index within the SPR group
+ @param[out] name Array to put the name in
+
+ @return The SPR name (pointer to the name argument) */
+/*---------------------------------------------------------------------------*/
+
+static char *
+or1k_spr_register_name (int group,
+ int index,
+ char *name)
+{
+ char di;
+
+ switch (group)
+ {
+
+ case OR1K_SPG_SYS:
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_SYS_VR: sprintf (name, "VR" ); return name;
+ case OR1K_SPG_SYS_UPR: sprintf (name, "UPR" ); return name;
+ case OR1K_SPG_SYS_CPUCFGR: sprintf (name, "CPUCFGR" ); return name;
+ case OR1K_SPG_SYS_DMMUCFGR: sprintf (name, "DMMUCFGR"); return name;
+ case OR1K_SPG_SYS_IMMUCFGR: sprintf (name, "IMMUCFGR"); return name;
+ case OR1K_SPG_SYS_DCCFGR: sprintf (name, "DCCFGR" ); return name;
+ case OR1K_SPG_SYS_ICCFGR: sprintf (name, "ICCFGR" ); return name;
+ case OR1K_SPG_SYS_DCFGR: sprintf (name, "DCFGR" ); return name;
+ case OR1K_SPG_SYS_PCCFGR: sprintf (name, "PCCFGR" ); return name;
+ case OR1K_SPG_SYS_NPC: sprintf (name, "NPC" ); return name;
+ case OR1K_SPG_SYS_SR: sprintf (name, "SR" ); return name;
+ case OR1K_SPG_SYS_PPC: sprintf (name, "PPC" ); return name;
+ case OR1K_SPG_SYS_FPCSR: sprintf (name, "FPCSR" ); return name;
+ }
+
+ /* Exception PC regs */
+ if((OR1K_SPG_SYS_EPCR <= index) &&
+ (index <= OR1K_SPG_SYS_EPCR_END))
+ {
+ sprintf (name, "EPCR%d", index - OR1K_SPG_SYS_EPCR);
+ return name;
+ }
+
+ /* Exception EA regs */
+ if((OR1K_SPG_SYS_EEAR <= index) &&
+ (index <= OR1K_SPG_SYS_EEAR_END))
+ {
+ sprintf (name, "EEAR%d", index - OR1K_SPG_SYS_EEAR);
+ return name;
+ }
+
+ /* Exception SR regs */
+ if((OR1K_SPG_SYS_ESR <= index) &&
+ (index <= OR1K_SPG_SYS_ESR_END))
+ {
+ sprintf (name, "ESR%d", index - OR1K_SPG_SYS_ESR);
+ return name;
+ }
+
+ /* GPRs */
+ if((OR1K_SPG_SYS_GPR <= index) &&
+ (index <= OR1K_SPG_SYS_GPR_END))
+ {
+ sprintf (name, "GPR%d", index - OR1K_SPG_SYS_GPR);
+ return name;
+ }
+
+ break;
+
+ case OR1K_SPG_DMMU:
+ case OR1K_SPG_IMMU:
+ /* MMU registers. Use DMMU constants throughout, but these are identical
+ to the corresponding IMMU constants */
+ di = OR1K_SPG_DMMU == group ? 'D' : 'I';
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_DMMU_DMMUCR:
+ sprintf (name, "%cMMUCR", di); return name;
+ case OR1K_SPG_DMMU_DMMUPR:
+ sprintf (name, "%cMMUPR", di); return name;
+ case OR1K_SPG_DMMU_DTLBEIR:
+ sprintf (name, "%cTLBEIR", di); return name;
+ }
+
+ /* ATB Match registers */
+ if((OR1K_SPG_DMMU_DATBMR <= index) &&
+ (index <= OR1K_SPG_DMMU_DATBMR_END))
+ {
+ sprintf (name, "%cATBMR%d", di, index - OR1K_SPG_DMMU_DATBMR);
+ return name;
+ }
+
+ /* ATB Translate registers */
+ if((OR1K_SPG_DMMU_DATBTR <= index) &&
+ (index <= OR1K_SPG_DMMU_DATBTR_END))
+ {
+ sprintf (name, "%cATBTR%d", di, index - OR1K_SPG_DMMU_DATBTR);
+ return name;
+ }
+
+ /* TLB Way 1 Match registers */
+ if((OR1K_SPG_DMMU_DTLBW1MR <= index) &&
+ (index <= OR1K_SPG_DMMU_DTLBW1MR_END))
+ {
+ sprintf (name, "%cTLBW1MR%d", di, index - OR1K_SPG_DMMU_DTLBW1MR);
+ return name;
+ }
+
+ /* TLB Way 1 Translate registers */
+ if((OR1K_SPG_DMMU_DTLBW1TR <= index) &&
+ (index <= OR1K_SPG_DMMU_DTLBW1TR_END))
+ {
+ sprintf (name, "%cTLBW1TR%d", di, index - OR1K_SPG_DMMU_DTLBW1TR);
+ return name;
+ }
+
+ /* TLB Way 2 Match registers */
+ if((OR1K_SPG_DMMU_DTLBW2MR <= index) &&
+ (index <= OR1K_SPG_DMMU_DTLBW2MR_END))
+ {
+ sprintf (name, "%cTLBW2MR%d", di, index - OR1K_SPG_DMMU_DTLBW2MR);
+ return name;
+ }
+
+ /* TLB Way 2 Translate registers */
+ if((OR1K_SPG_DMMU_DTLBW2TR <= index) &&
+ (index <= OR1K_SPG_DMMU_DTLBW2TR_END))
+ {
+ sprintf (name, "%cTLBW2TR%d", di, index - OR1K_SPG_DMMU_DTLBW2TR);
+ return name;
+ }
+
+ /* TLB Way 3 Match registers */
+ if((OR1K_SPG_DMMU_DTLBW3MR <= index) &&
+ (index <= OR1K_SPG_DMMU_DTLBW3MR_END))
+ {
+ sprintf (name, "%cTLBW3MR%d", di, index - OR1K_SPG_DMMU_DTLBW3MR);
+ return name;
+ }
+
+ /* TLB Way 3 Translate registers */
+ if((OR1K_SPG_DMMU_DTLBW3TR <= index) &&
+ (index <= OR1K_SPG_DMMU_DTLBW3TR_END))
+ {
+ sprintf (name, "%cTLBW3TR%d", di, index - OR1K_SPG_DMMU_DTLBW3TR);
+ return name;
+ }
+
+ break;
+
+ case OR1K_SPG_DC:
+ /* Data cache registers. These do not have an exact correspondence with
+ their instruction cache counterparts, so must be done separately. */
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_DC_DCCR: sprintf (name, "DCCR" ); return name;
+ case OR1K_SPG_DC_DCBPR: sprintf (name, "DCBPR"); return name;
+ case OR1K_SPG_DC_DCBFR: sprintf (name, "DCBFR"); return name;
+ case OR1K_SPG_DC_DCBIR: sprintf (name, "DCBIR"); return name;
+ case OR1K_SPG_DC_DCBWR: sprintf (name, "DCBWR"); return name;
+ case OR1K_SPG_DC_DCBLR: sprintf (name, "DCBLR"); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_IC:
+ /* Instruction cache registers */
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_IC_ICCR: sprintf (name, "ICCR" ); return name;
+ case OR1K_SPG_IC_ICBPR: sprintf (name, "ICBPR"); return name;
+ case OR1K_SPG_IC_ICBIR: sprintf (name, "ICBIR"); return name;
+ case OR1K_SPG_IC_ICBLR: sprintf (name, "ICBLR"); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_MAC:
+ /* MAC registers */
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_MAC_MACLO: sprintf (name, "MACLO"); return name;
+ case OR1K_SPG_MAC_MACHI: sprintf (name, "MACHI"); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_DEBUG:
+ /* Debug registers */
+
+ /* Debug Value registers */
+ if((OR1K_SPG_DEBUG_DVR <= index) &&
+ (index <= OR1K_SPG_DEBUG_DVR_END))
+ {
+ sprintf (name, "DVR%d", index - OR1K_SPG_DEBUG_DVR);
+ return name;
+ }
+
+ /* Debug Control registers */
+ if((OR1K_SPG_DEBUG_DCR <= index) &&
+ (index <= OR1K_SPG_DEBUG_DCR_END))
+ {
+ sprintf (name, "DCR%d", index - OR1K_SPG_DEBUG_DCR);
+ return name;
+ }
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_DEBUG_DMR1: sprintf (name, "DMR1" ); return name;
+ case OR1K_SPG_DEBUG_DMR2: sprintf (name, "DMR2" ); return name;
+ case OR1K_SPG_DEBUG_DCWR0: sprintf (name, "DCWR0"); return name;
+ case OR1K_SPG_DEBUG_DCWR1: sprintf (name, "DCWR1"); return name;
+ case OR1K_SPG_DEBUG_DSR: sprintf (name, "DSR" ); return name;
+ case OR1K_SPG_DEBUG_DRR: sprintf (name, "DRR" ); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_PC:
+ /* Performance Counter registers */
+
+ /* Performance Counters Count registers */
+ if((OR1K_SPG_PC_PCCR <= index) &&
+ (index <= OR1K_SPG_PC_PCCR_END))
+ {
+ sprintf (name, "PCCR%d", index - OR1K_SPG_PC_PCCR);
+ return name;
+ }
+
+ /* Performance Counters Mode registers */
+ if((OR1K_SPG_PC_PCMR <= index) &&
+ (index <= OR1K_SPG_PC_PCMR_END))
+ {
+ sprintf (name, "PCMR%d", index - OR1K_SPG_PC_PCMR);
+ return name;
+ }
+
+ break;
+
+ case OR1K_SPG_PM:
+ /* Power Management registers */
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_PM_PMR: sprintf (name, "PMR"); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_PIC:
+ /* Programmable Interrupt Controller registers */
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_PIC_PICMR: sprintf (name, "PICMR"); return name;
+ case OR1K_SPG_PIC_PICSR: sprintf (name, "PICSR"); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_TT:
+ /* Tick Timer registers */
+
+ /* 1:1 names */
+ switch (index)
+ {
+ case OR1K_SPG_TT_TTMR: sprintf (name, "TTMR"); return name;
+ case OR1K_SPG_TT_TTCR: sprintf (name, "TTCR"); return name;
+ }
+
+ break;
+
+ case OR1K_SPG_FPU:
+
+ break;
+ }
+
+ /* Not a recognized register */
+ strcpy (name, "");
+ return name;
+
+} /* or1k_spr_register_name() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Get SPR group number from a name
+
+ @param[in] group_name SPR register group
+
+ @return The index, or negative if no match. */
+/*----------------------------------------------------------------------------*/
+
+static int
+or1k_groupnum_from_name (char *group_name)
+{
+ int group;
+
+ for (group = 0; group < OR1K_NUM_SPGS; group++)
+ {
+ if (0 == strcasecmp (group_name, or1k_spr_group_name (group)))
+ {
+ return group;
+ }
+ }
+
+ return -1;
+
+} /* or1k_groupnum_from_name() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Get register index in special purpose register group from name
+
+ The name may either be SPR<group_num>_<index> or a known unique name. In
+ either case the group number must match the supplied group number.
+
+ @param[in] group SPR register group
+ @param[in] name Register name
+
+ @return The index, or negative if no match. */
+/*----------------------------------------------------------------------------*/
+
+static int
+or1k_regnum_from_name (int group,
+ char *name)
+{
+ /* Last valid register in each group. */
+ static const int or1k_spr_group_last[OR1K_NUM_SPGS] =
+ {
+ OR1K_SPG_SYS_LAST,
+ OR1K_SPG_DMMU_LAST,
+ OR1K_SPG_IMMU_LAST,
+ OR1K_SPG_DC_LAST,
+ OR1K_SPG_IC_LAST,
+ OR1K_SPG_MAC_LAST,
+ OR1K_SPG_DEBUG_LAST,
+ OR1K_SPG_PC_LAST,
+ OR1K_SPG_PM_LAST,
+ OR1K_SPG_PIC_LAST,
+ OR1K_SPG_TT_LAST,
+ OR1K_SPG_FPU_LAST
+ };
+
+ int i;
+ char spr_name[32];
+
+ if (0 == strcasecmp (name, "SPR"))
+ {
+ char *ptr_c;
+
+ /* Skip SPR */
+ name += 3;
+
+ /* Get group number */
+ i = (int) strtoul (name, &ptr_c, 10);
+ if (*ptr_c != '_' || i != group)
+ {
+ return -1;
+ }
+
+ /* Get index */
+ ptr_c++;
+ i = (int) strtoul (name, &ptr_c, 10);
+ if (*ptr_c)
+ {
+ return -1;
+ }
+ else
+ {
+ return i;
+ }
+ }
+
+ /* Look for a "known" name in this group */
+ for (i = 0; i <= or1k_spr_group_last[group]; i++)
+ {
+ char *s = or1k_spr_register_name (group, i, spr_name);
+
+ if (0 == strcasecmp (name, s))
+ {
+ return i;
+ }
+ }
+
+ /* Failure */
+ return -1;
+
+} /* or1k_regnum_from_name() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Get the next token from a string
+
+ I can't believe there isn't a library argument for this, but strtok is
+ deprecated.
+
+ Take a string and find the start of the next token and its length. A token
+ is anything containing non-blank characters.
+
+ @param[in] str The string to look at (may be NULL).
+ @param[out] tok Pointer to the start of the token within str. May be NULL
+ if this result is not wanted (e.g. just the length is
+ wanted. If no token is found will be the NULL char at the
+ end of the string, if the original str was NULL, this will
+ be NULL.
+
+ @return The length of the token found */
+/*----------------------------------------------------------------------------*/
+
+static int
+or1k_tokenize (char *str,
+ char **tok)
+{
+ char *ptr;
+ int len;
+
+ /* Deal with NULL argument */
+ if (NULL == str)
+ {
+ if (NULL != tok)
+ {
+ *tok = NULL;
+ }
+ return 0;
+ }
+
+ /* Find the start */
+ for (ptr = str; ISBLANK (*ptr) ; ptr++)
+ {
+ continue;
+ }
+
+ /* Return the start pointer if requested */
+ if (NULL != tok)
+ {
+ *tok = ptr;
+ }
+
+ /* Find the end and put in EOS */
+ for (len = 0; ('\0' != ptr[len]) && (!ISBLANK (ptr[len])); len++)
+ {
+ continue;
+ }
+
+ return len;
+
+} /* or1k_tokenize() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Parses args for spr commands
+
+ Determines the special purpose register (SPR) name and puts result into
+ group and index
+
+ Syntax is:
+
+ @verbatim
+ <spr_args> -> <group_ref> | <reg_name>
+ <group_ref> -> <group_id> <index>
+ <group_id> -> <group_num> | <group_name>
+ @endverbatim
+
+ Where the indices/names have to be valid.
+
+ So to parse, we look for 1 or 2 args. If 1 it must be a unique register
+ name. If 2, the first must be a group number or name and the second an
+ index within that group.
+
+ Also responsible for providing diagnostics if the arguments do not match.
+
+ Rewritten for GDB 6.8 to use the new UI calls and remove assorted
+ bugs. Syntax also slightly restricted to be more comprehensible.
+
+ @param[in] arg_str The argument string
+ @param[out] group The group this SPR belongs in, or -1 to indicate
+ failure
+ @param[out] index Index of the register within the group, or -1 to
+ indicate the whole group
+ @param[in] is_set 1 (true) if we are called from the "spr" command (so
+ there is an extra arg) rather than the "info spr"
+ command. Needed to distinguish between the case where
+ info is sought from a register specified as group and
+ index and setting a uniquely identified register to a
+ value.
+
+ @return A pointer to any remaining args */
+/*---------------------------------------------------------------------------*/
+
+static char *
+or1k_parse_spr_params (char *arg_str,
+ int *group,
+ int *index,
+ int is_set)
+{
+ struct {
+ char *str;
+ int len;
+ unsigned long int val;
+ int is_num;
+ } arg[3] = {
+ {
+ .str = NULL,
+ .len = 0,
+ .val = 0,
+ .is_num = 0,
+ },
+ {
+ .str = NULL,
+ .len = 0,
+ .val = 0,
+ .is_num = 0,
+ },
+ {
+ .str = NULL,
+ .len = 0,
+ .val = 0,
+ .is_num = 0,
+ }
+ };
+
+ int num_args;
+ char *trailer = arg_str;
+ char *tmp_str;
+ int i;
+ struct ui_out *uiout = current_uiout;
+ char spr_name[32];
+
+ /* Break out the arguments. Note that the strings are NOT null terminated
+ (we don't want to change arg_str), so we must rely on len. The stroul
+ call will still work, since there is always a non-digit char (possibly EOS)
+ after the last digit. */
+ if (NULL == arg_str)
+ {
+ num_args = 0;
+ }
+ else
+ {
+ for (num_args = 0; num_args < 3; num_args++)
+ {
+ arg[num_args].len = or1k_tokenize (trailer, &(arg[num_args].str));
+ trailer = arg[num_args].str + arg[num_args].len;
+
+ if (0 == arg[num_args].len)
+ {
+ break;
+ }
+ }
+ }
+
+ /* Patch nulls into the arg strings and see about values. Couldn't do this
+ earlier, since we needed the next char clean to check later args. This
+ means advancing trailer, UNLESS it was already at EOS */
+
+ if((NULL != arg_str) && ('\0' != *trailer))
+ {
+ trailer++;
+ }
+
+ for (i = 0; i < num_args; i++)
+ {
+ (arg[i].str)[arg[i].len] = '\0';
+ errno = 0;
+ arg[i].val = strtoul (arg[i].str, &tmp_str, 0);
+ arg[i].is_num = (0 == errno) && ('\0' == *tmp_str);
+ }
+
+ /* Deal with the case where we are setting a register, so the final argument
+ should be disregarded (it is the trailer). Do this anyway if we get a
+ third argument */
+ if ((is_set & (num_args > 0)) || (num_args > 2))
+ {
+ trailer = arg[num_args - 1].str;
+ num_args--;
+ }
+
+ /* Deal with different numbers of args */
+
+ switch (num_args)
+ {
+
+ case 0:
+ ui_out_message (uiout, 0,
+ "Usage: <command> <register> |\n"
+ " <command> <group> |\n"
+ " <command> <group> <index>\n"
+ "Valid groups are:\n");
+ for (i = 0; i < OR1K_NUM_SPGS; i++)
+ {
+ ui_out_field_string (uiout, NULL, or1k_spr_group_name (i));
+ ui_out_spaces (uiout, 1);
+ ui_out_wrap_hint (uiout, NULL);
+ }
+ ui_out_field_string (uiout, NULL, "\n");
+
+ *index = -1;
+ return trailer;
+
+ case 1:
+ /* See if it is a numeric group */
+ if (arg[0].is_num)
+ {
+ if (arg[0].val < OR1K_NUM_SPGS)
+ {
+ *group = arg[0].val;
+ *index = -1;
+ return trailer;
+ }
+ else
+ {
+ ui_out_message (uiout, 0,
+ "Group index should be in the range 0 - %d\n",
+ OR1K_NUM_SPGS);
+ *group = -1;
+ *index = -1;
+ return trailer;
+ }
+ }
+
+ /* Is is it a group name? */
+ *group = or1k_groupnum_from_name (arg[0].str);
+ if (*group >= 0)
+ {
+ *index = -1;
+ return trailer;
+ }
+
+ /* See if it is a valid register name in any group */
+ for (*group = 0; *group < OR1K_NUM_SPGS; (*group)++)
+ {
+ *index = or1k_regnum_from_name (*group, arg[0].str);
+
+ if (*index >= 0)
+ {
+ return trailer;
+ }
+ }
+
+ /* Couldn't find it - print out a rude message */
+ ui_out_message (uiout, 0,
+ "Group or register name not recognized.\n"
+ "Valid groups are:\n");
+ for (i = 0; i < OR1K_NUM_SPGS; i++)
+ {
+ ui_out_field_string (uiout, NULL, or1k_spr_group_name (i));
+ ui_out_spaces (uiout, 1);
+ ui_out_wrap_hint (uiout, NULL);
+ }
+ ui_out_field_string (uiout, NULL, "\n");
+
+ *group = -1;
+ *index = -1;
+ return trailer;
+
+ case 2:
+ /* See if first arg is a numeric group */
+ if (arg[0].is_num)
+ {
+ if (arg[0].val < OR1K_NUM_SPGS)
+ {
+ *group = arg[0].val;
+ *index = -1;
+ }
+ else
+ {
+ ui_out_message (uiout, 0,
+ "Group index should be in the range 0 - %d\n",
+ OR1K_NUM_SPGS - 1);
+ *group = -1;
+ *index = -1;
+ return trailer;
+ }
+ }
+ else
+ {
+ /* Is is it a group name? */
+ *group = or1k_groupnum_from_name (arg[0].str);
+ if (*group >= 0)
+ {
+ *index = -1;
+ }
+ else
+ {
+ ui_out_message (uiout, 0,
+ "Group name not recognized.\n"
+ "Valid groups are:\n");
+ for (i = 0; i < OR1K_NUM_SPGS; i++)
+ {
+ ui_out_field_string (uiout, NULL, or1k_spr_group_name (i));
+ ui_out_spaces (uiout, 1);
+ ui_out_wrap_hint (uiout, NULL);
+ }
+ ui_out_field_string (uiout, NULL, "\n");
+
+ *group = -1;
+ *index = -1;
+ return trailer;
+ }
+ }
+
+ /* Is second arg an index or name? */
+ if (arg[1].is_num)
+ {
+ if (arg[1].val < OR1K_SPG_SIZE)
+ {
+ /* Check this really is a register */
+ if (0 != strlen (or1k_spr_register_name (*group, arg[1].val,
+ spr_name)))
+ {
+ *index = arg[1].val;
+ return trailer;
+ }
+ else
+ {
+ ui_out_message (uiout, 0,
+ "No valid register at that index in group\n");
+ *group = -1;
+ *index = -1;
+ return trailer;
+ }
+ }
+ else
+ {
+ ui_out_message (uiout, 0,
+ "Register index should be in the range 0 - %d\n",
+ OR1K_SPG_SIZE - 1);
+ *group = -1;
+ *index = -1;
+ return trailer;
+ }
+ }
+
+ /* Must be a name */
+ *index = or1k_regnum_from_name (*group, arg[1].str);
+
+ if (*index >= 0)
+ {
+ return trailer;
+ }
+
+ /* Couldn't find it - print out a rude message */
+ ui_out_message (uiout, 0, "Register name not recognized in group.\n");
+ *group = -1;
+ *index = -1;
+ return trailer;
+
+ default:
+ /* Anything else is an error */
+ ui_out_message (uiout, 0, "Unable to parse arguments\n");
+ *group = -1;
+ *index = -1;
+ return trailer;
+ }
+} /* or1k_parse_spr_params() */
+
+
+/*---------------------------------------------------------------------------*/
+/*!Read a special purpose register from the target
+
+ This has to be done using the target remote command "readspr"
+
+ @param[in] regnum The register to read
+
+ @return The value read */
+/*---------------------------------------------------------------------------*/
+
+static ULONGEST
+or1k_read_spr (unsigned int regnum)
+{
+ struct ui_file *uibuf = mem_fileopen ();
+ char cmd[sizeof ("readspr ffff")];
+ unsigned long int data;
+ char *res;
+ long int len;
+
+ /* Create the command string and pass it to target remote command function */
+ sprintf (cmd, "readspr %4x", regnum);
+ target_rcmd (cmd, uibuf);
+
+ /* Get the output for the UI file as a string */
+ res = ui_file_xstrdup (uibuf, &len);
+ sscanf (res, "%lx", &data);
+
+ /* Tidy up */
+ xfree (res);
+ ui_file_delete (uibuf);
+
+ return (ULONGEST)data;
+
+} /* or1k_read_spr() */
+
+
+/*---------------------------------------------------------------------------*/
+/*!Write a special purpose register on the target
+
+ This has to be done using the target remote command "writespr"
+
+ Since the SPRs may map to GPR's or the other GDB register (PPC, NPC, SR),
+ any register cache is flushed.
+
+ @param[in] regnum The register to write
+ @param[in] data The value to write */
+/*---------------------------------------------------------------------------*/
+
+static void
+or1k_write_spr (unsigned int regnum,
+ ULONGEST data)
+{
+ struct ui_file *uibuf = mem_fileopen ();
+ char cmd[sizeof ("writespr ffff ffffffff")];
+ char *res;
+ long int len;
+
+ /* Create the command string and pass it to target remote command function */
+ sprintf (cmd, "writespr %4x %8llx", regnum, (long long unsigned int)data);
+ target_rcmd (cmd, uibuf);
+
+ /* Flush the register cache */
+ registers_changed ();
+
+ /* We ignore the result - Rcmd can put out its own error messages. Just
+ tidy up */
+ ui_file_delete (uibuf);
+
+} /* or1k_write_spr() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Show the value of a special purpose register or group
+
+ This is a custom extension to the GDB info command.
+
+ @param[in] args
+ @param[in] from_tty True (1) if GDB is running from a TTY, false (0)
+ otherwise. */
+/*---------------------------------------------------------------------------*/
+
+static void
+or1k_info_spr_command (char *args,
+ int from_tty)
+{
+ int group;
+ int index;
+ struct ui_out *uiout = current_uiout;
+ char spr_name[32];
+
+ or1k_parse_spr_params (args, &group, &index, 0);
+
+ if (group < 0)
+ {
+ return; /* Couldn't parse the args */
+ }
+
+ if (index >= 0)
+ {
+ ULONGEST value = or1k_read_spr (OR1K_SPR (group, index));
+
+ ui_out_field_fmt (uiout, NULL, "%s.%s = SPR%i_%i = %llu (0x%llx)\n",
+ or1k_spr_group_name (group),
+ or1k_spr_register_name (group, index, spr_name), group,
+ index, (long long unsigned int)value, (long long unsigned int)value);
+ }
+ else
+ {
+ /* Print all valid registers in the group */
+ for (index = 0; index < OR1K_SPG_SIZE; index++)
+ {
+ if (0 != strlen (or1k_spr_register_name (group, index, spr_name)))
+ {
+ ULONGEST value = or1k_read_spr (OR1K_SPR (group, index));
+
+ ui_out_field_fmt (uiout, NULL,
+ "%s.%s = SPR%i_%i = %llu (0x%llx)\n",
+ or1k_spr_group_name (group),
+ or1k_spr_register_name (group, index, spr_name),
+ group, index, (long long unsigned int)value, (long long unsigned int)value);
+ }
+ }
+ }
+} /* or1k_info_spr_command() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Set a special purpose register
+
+ This is a custom command added to GDB.
+
+ @param[in] args
+ @param[in] from_tty True (1) if GDB is running from a TTY, false (0)
+ otherwise. */
+/*---------------------------------------------------------------------------*/
+
+static void
+or1k_spr_command (char *args,
+ int from_tty)
+{
+ int group;
+ int index;
+ char *tmp_str;
+ char *nargs = or1k_parse_spr_params (args, &group, &index, 1);
+ struct ui_out *uiout = current_uiout;
+ ULONGEST old_val;
+ ULONGEST new_val;
+
+ char spr_name[32];
+
+ /* Do we have a valid register spec? */
+ if (index < 0)
+ {
+ return; /* Parser will have printed the error message */
+ }
+
+ /* Do we have a value to set? */
+
+ errno = 0;
+ new_val = (ULONGEST)strtoul (nargs, &tmp_str, 0);
+
+ if((0 != errno) || ('\0' != *tmp_str))
+ {
+ ui_out_message (uiout, 0, "Invalid value - register not changed\n");
+ return;
+ }
+
+ old_val = or1k_read_spr (OR1K_SPR (group, index));
+
+ or1k_write_spr (OR1K_SPR (group, index) , new_val);
+
+ ui_out_field_fmt (uiout, NULL,
+ "%s.%s (SPR%i_%i) set to %llu (0x%llx), "
+ "was: %llu (0x%llx)\n",
+ or1k_spr_group_name (group),
+ or1k_spr_register_name (group, index, spr_name) , group,
+ index, (long long unsigned int)new_val, (long long unsigned int)new_val, (long long unsigned int)old_val, (long long unsigned int)old_val);
+
+} /* or1k_spr_command() */
+
+
+/*----------------------------------------------------------------------------*/
+/*!Main entry point for target architecture initialization
+
+ In this version initializes the architecture via
+ registers_gdbarch_init(). Add a command to set and show special purpose
+ registers. */
+/*---------------------------------------------------------------------------*/
+
+extern initialize_file_ftype _initialize_or1k_tdep; /* -Wmissing-prototypes */
+
+void
+_initialize_or1k_tdep (void)
+{
+ /* Register this architecture. We should do this for or16 and or64 when
+ they have their BFD defined. */
+ gdbarch_register (bfd_arch_or1k, or1k_gdbarch_init, or1k_dump_tdep);
+
+ /* Commands to show and set special purpose registers */
+ add_info ("spr", or1k_info_spr_command,
+ "Show the value of a special purpose register");
+ add_com ("spr", class_support, or1k_spr_command,
+ "Set a special purpose register");
+
+} /* _initialize_or1k_tdep() */
diff --git a/gdb/or1k-tdep.h b/gdb/or1k-tdep.h
new file mode 100644
index 0000000..3179537
--- /dev/null
+++ b/gdb/or1k-tdep.h
@@ -0,0 +1,432 @@
+/* Definitions to target GDB to OpenRISC 1000 32-bit targets.
+
+ Copyright 2001 Free Software Foundation, Inc.
+ Copyright (C) 2008, 2010 Embecosm Limited
+
+ Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 3 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+
+#ifndef OR1K_TDEP__H
+#define OR1K_TDEP__H
+
+#ifndef TARGET_OR1K
+#define TARGET_OR1K
+#endif
+
+/*-----------------------------------------------------------------------------
+ This version for the OpenRISC 1000 architecture is a rewrite by Jeremy
+ Bennett of the old GDB 5.3 interface to make use of gdbarch for GDB 6.8.
+
+ The code tries to follow the GDB coding style. All OR1K specific globals
+ should have names beginning ork1_ or OR1K_.
+
+ Commenting is Doxygen compatible.
+
+ Much has been stripped out. See the files or1k-tdep.c, remote-or1k.c and
+ or1k-jtag.c for details of what has changed.
+ --------------------------------------------------------------------------*/
+
+
+/*! Byte array for the TRAP instruction used for breakpoints */
+#define OR1K_BRK_INSTR_STRUCT {0x21, 0x00, 0x00, 0x01}
+/*! Numeric instruction used for a breakpoint */
+#define OR1K_BRK_INSTR 0x21000001
+
+/*! Numeric instruction used for a l.nop NOP_EXIT */
+#define OR1K_NOP_EXIT 0x15000001
+
+/* Special purpose groups */
+
+#define OR1K_SPG_SIZE_BITS 11
+#define OR1K_SPG_SIZE (1 << OR1K_SPG_SIZE_BITS)
+
+#define OR1K_SPG_SYS 0
+#define OR1K_SPG_DMMU 1
+#define OR1K_SPG_IMMU 2
+#define OR1K_SPG_DC 3
+#define OR1K_SPG_IC 4
+#define OR1K_SPG_MAC 5
+#define OR1K_SPG_DEBUG 6
+#define OR1K_SPG_PC 7
+#define OR1K_SPG_PM 8
+#define OR1K_SPG_PIC 9
+#define OR1K_SPG_TT 10
+#define OR1K_SPG_FPU 11
+
+#define OR1K_NUM_SPGS (OR1K_SPG_FPU + 1)
+
+/* Special register group offsets */
+
+#define OR1K_SPG_SYS_VR 0
+#define OR1K_SPG_SYS_UPR 1
+#define OR1K_SPG_SYS_CPUCFGR 2
+#define OR1K_SPG_SYS_DMMUCFGR 3
+#define OR1K_SPG_SYS_IMMUCFGR 4
+#define OR1K_SPG_SYS_DCCFGR 5
+#define OR1K_SPG_SYS_ICCFGR 6
+#define OR1K_SPG_SYS_DCFGR 7
+#define OR1K_SPG_SYS_PCCFGR 8
+#define OR1K_SPG_SYS_NPC 16
+#define OR1K_SPG_SYS_SR 17
+#define OR1K_SPG_SYS_PPC 18
+#define OR1K_SPG_SYS_FPCSR 20
+#define OR1K_SPG_SYS_EPCR 32
+#define OR1K_SPG_SYS_EPCR_END (OR1K_SPG_SYS_EPCR + 15)
+#define OR1K_SPG_SYS_EEAR 48
+#define OR1K_SPG_SYS_EEAR_END (OR1K_SPG_SYS_EEAR + 15)
+#define OR1K_SPG_SYS_ESR 64
+#define OR1K_SPG_SYS_ESR_END (OR1K_SPG_SYS_ESR + 15)
+#define OR1K_SPG_SYS_GPR 1024
+#define OR1K_SPG_SYS_GPR_END (OR1K_SPG_SYS_GPR + OR1K_MAX_GPR_REGS)
+#define OR1K_SPG_SYS_LAST OR1K_SPG_SYS_GPR_END
+
+#define OR1K_SPG_DMMU_DMMUCR 0
+#define OR1K_SPG_DMMU_DMMUPR 1
+#define OR1K_SPG_DMMU_DTLBEIR 2
+#define OR1K_SPG_DMMU_DATBMR 4
+#define OR1K_SPG_DMMU_DATBMR_END (OR1K_SPG_DMMU_DATBMR + 3)
+#define OR1K_SPG_DMMU_DATBTR 8
+#define OR1K_SPG_DMMU_DATBTR_END (OR1K_SPG_DMMU_DATBTR + 3)
+#define OR1K_SPG_DMMU_DTLBW0MR 512
+#define OR1K_SPG_DMMU_DTLBW0MR_END (OR1K_SPG_DMMU_DTLBW0MR + 127)
+#define OR1K_SPG_DMMU_DTLBW0TR 640
+#define OR1K_SPG_DMMU_DTLBW0TR_END (OR1K_SPG_DMMU_DTLBW0TR + 127)
+#define OR1K_SPG_DMMU_DTLBW1MR 768
+#define OR1K_SPG_DMMU_DTLBW1MR_END (OR1K_SPG_DMMU_DTLBW1MR + 127)
+#define OR1K_SPG_DMMU_DTLBW1TR 896
+#define OR1K_SPG_DMMU_DTLBW1TR_END (OR1K_SPG_DMMU_DTLBW1TR + 127)
+#define OR1K_SPG_DMMU_DTLBW2MR 1024
+#define OR1K_SPG_DMMU_DTLBW2MR_END (OR1K_SPG_DMMU_DTLBW2MR + 127)
+#define OR1K_SPG_DMMU_DTLBW2TR 1152
+#define OR1K_SPG_DMMU_DTLBW2TR_END (OR1K_SPG_DMMU_DTLBW2TR + 127)
+#define OR1K_SPG_DMMU_DTLBW3MR 1280
+#define OR1K_SPG_DMMU_DTLBW3MR_END (OR1K_SPG_DMMU_DTLBW3MR + 127)
+#define OR1K_SPG_DMMU_DTLBW3TR 1408
+#define OR1K_SPG_DMMU_DTLBW3TR_END (OR1K_SPG_DMMU_DTLBW3TR + 127)
+#define OR1K_SPG_DMMU_LAST OR1K_SPG_DMMU_DTLBW3TR_END
+
+#define OR1K_SPG_IMMU_IMMUCR 0
+#define OR1K_SPG_IMMU_IMMUPR 1
+#define OR1K_SPG_IMMU_ITLBEIR 2
+#define OR1K_SPG_IMMU_IATBMR 4
+#define OR1K_SPG_IMMU_IATBMR_END (OR1K_SPG_IMMU_IATBMR + 3)
+#define OR1K_SPG_IMMU_IATBTR 8
+#define OR1K_SPG_IMMU_IATBTR_END (OR1K_SPG_IMMU_IATBTR + 3)
+#define OR1K_SPG_IMMU_ITLBW0MR 512
+#define OR1K_SPG_IMMU_ITLBW0MR_END (OR1K_SPG_IMMU_ITLBW0MR + 127)
+#define OR1K_SPG_IMMU_ITLBW0TR 640
+#define OR1K_SPG_IMMU_ITLBW0TR_END (OR1K_SPG_IMMU_ITLBW0TR + 127)
+#define OR1K_SPG_IMMU_ITLBW1MR 768
+#define OR1K_SPG_IMMU_ITLBW1MR_END (OR1K_SPG_IMMU_ITLBW1MR + 127)
+#define OR1K_SPG_IMMU_ITLBW1TR 896
+#define OR1K_SPG_IMMU_ITLBW1TR_END (OR1K_SPG_IMMU_ITLBW1TR + 127)
+#define OR1K_SPG_IMMU_ITLBW2MR 1024
+#define OR1K_SPG_IMMU_ITLBW2MR_END (OR1K_SPG_IMMU_ITLBW2MR + 127)
+#define OR1K_SPG_IMMU_ITLBW2TR 1152
+#define OR1K_SPG_IMMU_ITLBW2TR_END (OR1K_SPG_IMMU_ITLBW2TR + 127)
+#define OR1K_SPG_IMMU_ITLBW3MR 1280
+#define OR1K_SPG_IMMU_ITLBW3MR_END (OR1K_SPG_IMMU_ITLBW3MR + 127)
+#define OR1K_SPG_IMMU_ITLBW3TR 1408
+#define OR1K_SPG_IMMU_ITLBW3TR_END (OR1K_SPG_IMMU_ITLBW3TR + 127)
+#define OR1K_SPG_IMMU_LAST OR1K_SPG_IMMU_ITLBW3TR_END
+
+#define OR1K_SPG_DC_DCCR 0
+#define OR1K_SPG_DC_DCBPR 1
+#define OR1K_SPG_DC_DCBFR 2
+#define OR1K_SPG_DC_DCBIR 3
+#define OR1K_SPG_DC_DCBWR 4
+#define OR1K_SPG_DC_DCBLR 5
+#define OR1K_SPG_DC_LAST OR1K_SPG_DC_DCBLR
+
+#define OR1K_SPG_IC_ICCR 0
+#define OR1K_SPG_IC_ICBPR 1
+#define OR1K_SPG_IC_ICBIR 2
+#define OR1K_SPG_IC_ICBLR 3
+#define OR1K_SPG_IC_LAST OR1K_SPG_IC_ICBLR
+
+#define OR1K_SPG_MAC_MACLO 1
+#define OR1K_SPG_MAC_MACHI 2
+#define OR1K_SPG_MAC_LAST OR1K_SPG_MAC_MACHI
+
+#define OR1K_SPG_DEBUG_DVR 0
+#define OR1K_SPG_DEBUG_DVR_END (OR1K_SPG_DEBUG_DVR + 7)
+#define OR1K_SPG_DEBUG_DCR 8
+#define OR1K_SPG_DEBUG_DCR_END (OR1K_SPG_DEBUG_DCR + 7)
+#define OR1K_SPG_DEBUG_DMR1 16
+#define OR1K_SPG_DEBUG_DMR2 17
+#define OR1K_SPG_DEBUG_DCWR0 18
+#define OR1K_SPG_DEBUG_DCWR1 19
+#define OR1K_SPG_DEBUG_DSR 20
+#define OR1K_SPG_DEBUG_DRR 21
+#define OR1K_SPG_DEBUG_LAST OR1K_SPG_DEBUG_DRR
+
+#define OR1K_SPG_PC_PCCR 0
+#define OR1K_SPG_PC_PCCR_END (OR1K_SPG_PC_PCCR + 7)
+#define OR1K_SPG_PC_PCMR 8
+#define OR1K_SPG_PC_PCMR_END (OR1K_SPG_PC_PCMR + 7)
+#define OR1K_SPG_PC_LAST OR1K_SPG_PC_PCMR_END
+
+#define OR1K_SPG_PM_PMR 0
+#define OR1K_SPG_PM_LAST OR1K_SPG_PM_PMR
+
+#define OR1K_SPG_PIC_PICMR 0
+#define OR1K_SPG_PIC_PICSR 2
+#define OR1K_SPG_PIC_LAST OR1K_SPG_PIC_PICSR
+
+#define OR1K_SPG_TT_TTMR 0
+#define OR1K_SPG_TT_TTCR 1
+#define OR1K_SPG_TT_LAST OR1K_SPG_TT_TTCR
+
+#define OR1K_SPG_FPU_LAST -1
+
+
+/* Define absolute SPR values from group and index */
+#define OR1K_SPR(group, index) (((group) << OR1K_SPG_SIZE_BITS) + (index))
+
+/* System group registers */
+#define OR1K_VR_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_VR)
+#define OR1K_UPR_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_UPR)
+#define OR1K_CPUCFGR_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_CPUCFGR)
+#define OR1K_DCFGR_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_DCFGR)
+#define OR1K_NPC_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_NPC)
+#define OR1K_SR_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_SR)
+#define OR1K_PPC_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_PPC)
+#define OR1K_EPCR_SPRNUM OR1K_SPR (OR1K_SPG_SYS, OR1K_SPG_SYS_EPCR)
+
+/* Debug group registers */
+#define OR1K_DVR0_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DVR)
+#define OR1K_DCR0_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DCR)
+#define OR1K_DMR1_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DMR1)
+#define OR1K_DMR2_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DMR2)
+#define OR1K_DCWR0_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DCWR0)
+#define OR1K_DCWR1_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DCWR0)
+#define OR1K_DSR_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DSR)
+#define OR1K_DRR_SPRNUM OR1K_SPR (OR1K_SPG_DEBUG, OR1K_SPG_DEBUG_DRR)
+
+/* General Purpose Registers */
+#define OR1K_ZERO_REGNUM 0
+#define OR1K_SP_REGNUM 1
+#define OR1K_FP_REGNUM 2
+#define OR1K_FIRST_ARG_REGNUM 3
+#define OR1K_LAST_ARG_REGNUM 8
+#define OR1K_LR_REGNUM 9
+#define OR1K_FIRST_SAVED_REGNUM 10
+#define OR1K_RV_REGNUM 11
+#define OR1K_PPC_REGNUM (OR1K_MAX_GPR_REGS + 0)
+#define OR1K_NPC_REGNUM (OR1K_MAX_GPR_REGS + 1)
+#define OR1K_SR_REGNUM (OR1K_MAX_GPR_REGS + 2)
+
+/* Defines for Debug Control Register bits */
+
+#define OR1K_DCR_DP 0x0000001 /* DVR/DCR Present */
+#define OR1K_DCR_CC 0x000000e /* Compare condition */
+#define OR1K_DCR_CC_OFF 1 /* Compare condition offset */
+#define OR1K_DCR_SC 0x0000010 /* Signed compare */
+#define OR1K_DCR_CT 0x00000e0 /* Compare type */
+#define OR1K_DCR_CT_OFF 5 /* Compare type offset */
+
+/* Defines for Debug Mode Register 1 bits. */
+#define OR1K_DMR1_CW 0x00000003 /* Mask for CW bits */
+#define OR1K_DMR1_CW_AND 0x00000001 /* Chain watchpoint 0 AND */
+#define OR1K_DMR1_CW_OR 0x00000002 /* Chain watchpoint 0 OR */
+#define OR1K_DMR1_CW_SZ 2 /* Number of bits for each WP */
+#define OR1K_DMR1_ST 0x00400000 /* Single-step trace */
+#define OR1K_DMR1_BT 0x00800000 /* Branch trace */
+
+/* Defines for Debug Mode Register 2 bits. */
+#define OR1K_DMR2_WCE0 0x00000001 /* Watchpoint counter enable 0 */
+#define OR1K_DMR2_WCE1 0x00000002 /* Watchpoint counter enable 1 */
+#define OR1K_DMR2_AWTC_MASK 0x00000ffc /* Assign watchpoints to ctr mask */
+#define OR1K_DMR2_WGB_MASK 0x003ff000 /* Watchpoints generaing brk mask */
+#define OR1K_DMR2_WBS_MASK 0xffc00000 /* Watchpoint brkpt status mask */
+#define OR1K_DMR2_AWTC_OFF 2 /* Assign watchpoints to ctr offset */
+#define OR1K_DMR2_WGB_OFF 12 /* Watchpoints generating brk offset */
+#define OR1K_DMR2_WBS_OFF 22 /* Watchpoint brkpt status offset */
+
+/* Defines for Debug Stop Register. */
+#define OR1K_DSR_RSTE 0x00000001 /* Reset exception */
+#define OR1K_DSR_BUSEE 0x00000002 /* Bus error exception */
+#define OR1K_DSR_DPFE 0x00000004 /* Data page fault exception */
+#define OR1K_DSR_IPFE 0x00000008 /* Instrution page fault exception */
+#define OR1K_DSR_TTE 0x00000010 /* Tick timer exception */
+#define OR1K_DSR_AE 0x00000020 /* Alignment exception */
+#define OR1K_DSR_IIE 0x00000040 /* Illegal instruction exception */
+#define OR1K_DSR_INTE 0x00000080 /* Interrupt exception */
+#define OR1K_DSR_DME 0x00000100 /* DTLB miss exception */
+#define OR1K_DSR_IME 0x00000200 /* ITLB miss exception */
+#define OR1K_DSR_RE 0x00000400 /* Range exception */
+#define OR1K_DSR_SCE 0x00000800 /* System call exception */
+#define OR1K_DSR_FPE 0x00001000 /* Floating point exception */
+#define OR1K_DSR_TE 0x00002000 /* Trap exception */
+
+/* Defines for Debug Reason Register bits */
+#define OR1K_DRR_RSTE 0x00000001 /* Reset exception */
+#define OR1K_DRR_BUSEE 0x00000002 /* Bus error exception */
+#define OR1K_DRR_DPFE 0x00000004 /* Data page fault exception */
+#define OR1K_DRR_IPFE 0x00000008 /* Instrution page fault exception */
+#define OR1K_DRR_TTE 0x00000010 /* Tick timer exception */
+#define OR1K_DRR_AE 0x00000020 /* Alignment exception */
+#define OR1K_DRR_IIE 0x00000040 /* Illegal instruction exception */
+#define OR1K_DRR_INTE 0x00000080 /* Interrupt exception */
+#define OR1K_DRR_DME 0x00000100 /* DTLB miss exception */
+#define OR1K_DRR_IME 0x00000200 /* ITLB miss exception */
+#define OR1K_DRR_RE 0x00000400 /* Range exception */
+#define OR1K_DRR_SCE 0x00000800 /* System call exception */
+#define OR1K_DRR_FPE 0x00001000 /* Floating point exception */
+#define OR1K_DRR_TE 0x00002000 /* Trap exception */
+
+/* Bit definitions for the Unit Present Register */
+#define OR1K_SPR_UPR_UP 0x00000001 /* UPR present */
+#define OR1K_SPR_UPR_DCP 0x00000002 /* Data cache present */
+#define OR1K_SPR_UPR_ICP 0x00000004 /* Instruction cache present */
+#define OR1K_SPR_UPR_DMP 0x00000008 /* Data MMU present */
+#define OR1K_SPR_UPR_IMP 0x00000010 /* Instruction MMU present */
+#define OR1K_SPR_UPR_MP 0x00000020 /* MAC present */
+#define OR1K_SPR_UPR_DUP 0x00000040 /* Debug unit present */
+#define OR1K_SPR_UPR_PCUP 0x00000080 /* Perf counters unit present */
+#define OR1K_SPR_UPR_PMP 0x00000100 /* Power management present */
+#define OR1K_SPR_UPR_PICP 0x00000200 /* PIC present */
+#define OR1K_SPR_UPR_TTP 0x00000400 /* Tick timer present */
+
+/* Bit definitions for the CPU Configuration Register */
+#define OR1K_SPR_CPUCFGR_NSGF 0x0000000f /* Number of shadow GPR files */
+#define OR1K_SPR_CPUCFGR_CGF 0x00000010 /* Custom GPR file */
+#define OR1K_SPR_CPUCFGR_OB32S 0x00000020 /* ORBIS32 supported */
+#define OR1K_SPR_CPUCFGR_OB64S 0x00000040 /* ORBIS64 supported */
+#define OR1K_SPR_CPUCFGR_OF32S 0x00000080 /* ORFPX32 supported */
+#define OR1K_SPR_CPUCFGR_OF64S 0x00000100 /* ORFPX64 supported */
+#define OR1K_SPR_CPUCFGR_OV64S 0x00000400 /* ORVDX64 supported */
+
+/* Bit definitions for the Debug configuration register */
+#define OR1K_SPR_DCFGR_NDP 0x00000007 /* Number of matchpoints */
+#define OR1K_SPR_DCFGR_WPCI 0x00000008 /* Watchpoint ctrs implemented */
+
+/* Properties of the architecture. GDB mapping of registers is all the GPRs
+ followed by the PPC, NPC and SR at the end. Red zone is the area past the
+ end of the stack reserved for exception handlers etc. */
+#define OR1K_MAX_GPR_REGS 32
+#define OR1K_NUM_PSEUDO_REGS 0
+#define OR1K_NUM_REGS (OR1K_MAX_GPR_REGS + 3)
+#define OR1K_TOTAL_NUM_REGS (OR1K_NUM_REGS + OR1K_NUM_PSEUDO_REGS)
+#define OR1K_MAX_MATCHPOINTS 8
+#define OR1K_MAX_HW_WATCHES OR1K_MAX_MATCHPOINTS
+#define OR1K_STACK_ALIGN 4
+#define OR1K_INSTLEN 4
+#define OR1K_INSTBITLEN (OR1K_INSTLEN * 8)
+#define OR1K_NUM_TAP_RECORDS 8
+#define OR1K_FRAME_RED_ZONE_SIZE 2536
+
+/* OR1K exception vectors */
+
+#define OR1K_RESET_VECTOR 0x100
+#define OR1K_BUSERR_VECTOR 0x200
+#define OR1K_DPF_VECTOR 0x300
+#define OR1K_IPF_VECTOR 0x400
+#define OR1K_TT_VECTOR 0x500
+#define OR1K_ALIGN_VECTOR 0x600
+#define OR1K_ILL_VECTOR 0x700
+#define OR1K_EXT_VECTOR 0x800
+#define OR1K_DTLB_VECTOR 0x900
+#define OR1K_ITLB_VECTOR 0xa00
+#define OR1K_RANGE_VECTOR 0xb00
+#define OR1K_SYS_VECTOR 0xc00
+#define OR1K_FP_VECTOR 0xd00
+#define OR1K_TRAP_VECTOR 0xe00
+
+/* Constants and macros to break out instruction fields. I'd expect these in
+ the assembler header, but they aren't there (for now). */
+
+#define OR1K_SEXT16(v) (((v) & 0x00008000) ? ((v) - 0x00010000) : (v))
+#define OR1K_SEXT26(v) (((v) & 0x02000000) ? ((v) - 0x04000000) : (v))
+
+#define OR1K_OPCODE1(i) (((i) & 0xfc000000) >> 26)
+#define OR1K_OPCODE2(i) ((((i) & 0xfc000000) >> 20) | \
+ (((i) & 0x00000300) >> 6) | \
+ ((i) & 0x0000000f))
+#define OR1K_OPCODE3(i) ((((i) & 0xfc000000) >> 24) | \
+ (((i) & 0x000000c0) >> 6))
+#define OR1K_OPCODE4(i) ((((i) & 0xfc000000) >> 18) | \
+ (((i) & 0x000003c0) >> 2) | \
+ ((i) & 0x0000000f))
+#define OR1K_OPCODE5(i) (((i) & 0xffff0000) >> 16)
+#define OR1K_OPCODE6(i) (((i) & 0xff000000) >> 24)
+#define OR1K_OPCODE7(i) (((i) & 0xfc000000) >> 21)
+#define OR1K_D_REG(i) (((i) & 0x03e00000) >> 21)
+#define OR1K_A_REG(i) (((i) & 0x001f0000) >> 16)
+#define OR1K_B_REG(i) (((i) & 0x0000f800) >> 11)
+#define OR1K_IMM(i) (OR1K_SEXT16((i) & 0x0000ffff))
+#define OR1K_IMM2(i) (OR1K_SEXT16((((i) & 0x03e00000) >> 10) | \
+ ((i) & 0x000003ff)))
+#define OR1K_OFFSET(i) (OR1K_SEXT26((i) & 0x03ffffff) ))
+#define OR1K_SHIFT(i) ((i) & 0x0000003f)
+
+/* The instruction opcodes */
+
+#define OR1K_OP_ADD 0xe00 /* Type 2 */
+#define OR1K_OP_ADDC 0xe01 /* Type 2 */
+#define OR1K_OP_ADDI 0x27 /* Type 1 */
+#define OR1K_OP_AND 0xe03 /* Type 2 */
+#define OR1K_OP_ANDI 0x29 /* Type 1 */
+#define OR1K_OP_BF 0x04 /* Type 1 */
+#define OR1K_OP_BNF 0x03 /* Type 1 */
+#define OR1K_OP_TRAP 0x2100 /* Type 5 */
+#define OR1K_OP_J 0x00 /* Type 1 */
+#define OR1K_OP_JAL 0x01 /* Type 1 */
+#define OR1K_OP_JALR 0x12 /* Type 1 */
+#define OR1K_OP_JR 0x11 /* Type 1 */
+#define OR1K_OP_LBS 0x24 /* Type 1 */
+#define OR1K_OP_LBZ 0x23 /* Type 1 */
+#define OR1K_OP_LHS 0x26 /* Type 1 */
+#define OR1K_OP_LHZ 0x25 /* Type 1 */
+#define OR1K_OP_LWS 0x22 /* Type 1 */
+#define OR1K_OP_LWZ 0x21 /* Type 1 */
+#define OR1K_OP_MFSPR 0x07 /* Type 1 */
+#define OR1K_OP_MOVHI 0x06 /* Type 1 */
+#define OR1K_OP_MTSPR 0x10 /* Type 1 */
+#define OR1K_OP_MUL 0xe36 /* Type 2 */
+#define OR1K_OP_MULI 0x2c /* Type 1 */
+#define OR1K_OP_MULU 0xe3b /* Type 2 */
+#define OR1K_OP_NOP 0x15 /* Type 6 */
+#define OR1K_OP_OR 0xe04 /* Type 2 */
+#define OR1K_OP_ORI 0x2a /* Type 1 */
+#define OR1K_OP_RFE 0x09 /* Type 1 */
+#define OR1K_OP_RORI 0xe3 /* Type 3 */
+#define OR1K_OP_SB 0x36 /* Type 1 */
+#define OR1K_OP_SFEQ 0x720 /* Type 7 */
+#define OR1K_OP_SFGES 0x72b /* Type 7 */
+#define OR1K_OP_SFGEU 0x723 /* Type 7 */
+#define OR1K_OP_SFGTS 0x72a /* Type 7 */
+#define OR1K_OP_SFGTU 0x722 /* Type 7 */
+#define OR1K_OP_SFLES 0x72d /* Type 7 */
+#define OR1K_OP_SFLEU 0x725 /* Type 7 */
+#define OR1K_OP_SFLTS 0x72c /* Type 7 */
+#define OR1K_OP_SFLTU 0x724 /* Type 7 */
+#define OR1K_OP_SFNE 0x721 /* Type 7 */
+#define OR1K_OP_SLL 0x3808 /* Type 4 */
+#define OR1K_OP_SLLI 0xe0 /* Type 3 */
+#define OR1K_OP_SRA 0x3828 /* Type 4 */
+#define OR1K_OP_SRAI 0xe2 /* Type 3 */
+#define OR1K_OP_SRL 0x3818 /* Type 4 */
+#define OR1K_OP_SRLI 0xe1 /* Type 3 */
+#define OR1K_OP_SUB 0xe02 /* Type 2 */
+#define OR1K_OP_SW 0x35 /* Type 1 */
+#define OR1K_OP_SYS 0x2000 /* Type 5 */
+#define OR1K_OP_XOR 0xe05 /* Type 2 */
+#define OR1K_OP_XORI 0x2b /* Type 1 */
+
+#endif /* OR1K_TDEP__H */
--
2.7.4