This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [PATCH v3 2/2] Rearrange gdb/configure.nat to make it simpler and less redundant
- From: Sergio Durigan Junior <sergiodj at redhat dot com>
- To: GDB Patches <gdb-patches at sourceware dot org>
- Cc: Pedro Alves <palves at redhat dot com>, Simon Marchi <simon dot marchi at polymtl dot ca>, John Baldwin <jhb at freebsd dot org>
- Date: Sat, 06 May 2017 10:13:48 -0400
- Subject: Re: [PATCH v3 2/2] Rearrange gdb/configure.nat to make it simpler and less redundant
- Authentication-results: sourceware.org; auth=none
- Authentication-results: ext-mx06.extmail.prod.ext.phx2.redhat.com; dmarc=none (p=none dis=none) header.from=redhat.com
- Authentication-results: ext-mx06.extmail.prod.ext.phx2.redhat.com; spf=pass smtp.mailfrom=sergiodj at redhat dot com
- Dkim-filter: OpenDKIM Filter v2.11.0 mx1.redhat.com B65683B712
- Dmarc-filter: OpenDMARC Filter v1.3.2 mx1.redhat.com B65683B712
- References: <20170425202309.15771-1-sergiodj@redhat.com> <20170505042951.32097-1-sergiodj@redhat.com> <20170505042951.32097-3-sergiodj@redhat.com>
On Friday, May 05 2017, I wrote:
> The previous commit introduced gdb/configure.nat, but it was just a
> copy-and-past (with the necessary adjustments) from the files under
> gdb/config/. We can do better than that.
>
> Instead of using one big 'case' statement that matches the
> ${gdb_host_cpu} and then match each ${gdb_host}, it is possible to
> remove a lof of redundancy by matching the most common ${gdb_host}'s
> first, setting the common variables for each, and then proceed to
> matching specific ${gdb_host}'s and ${gdb_host_cpu}'s. In other
> words, reverse the order of the 'case's and take advantage of the fact
> that a lot of parameters are the same for each host.
>
> This commit was tested on x86_64 without regressions.
>
> gdb/ChangeLog:
> yyyy-mm-dd Sergio Durigan Junior <sergiodj@redhat.com>
>
> * configure.nat: Rearrange 'case' statements to match
> host before cpu.
> ---
> gdb/configure.nat | 938 ++++++++++++++++++++++++------------------------------
> 1 file changed, 410 insertions(+), 528 deletions(-)
>
> diff --git a/gdb/configure.nat b/gdb/configure.nat
> index c0ac811..6c135d0 100644
> --- a/gdb/configure.nat
> +++ b/gdb/configure.nat
> @@ -48,555 +48,437 @@
> # - nat_extra_makefile_frag should contain the full path of the file.
>
>
> -case ${gdb_host_cpu} in
> - aarch64)
> - case ${gdb_host} in
> - linux)
> - # Host: AArch64 based machine running GNU/Linux
> +# This first case is useful for filling default values for each
> +# gdb_host.
> +case ${gdb_host} in
> + *linux*)
> NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o aarch64-linux-nat.o aarch32-linux-nat.o \
> - proc-service.o linux-thread-db.o linux-nat.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-osdata.o linux-waitpid.o \
> - linux-personality.o linux-namespaces.o aarch64-linux-hw-point.o \
> - aarch64-linux.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - esac
> - ;;
> - alpha)
> - case ${gdb_host} in
> - alpha-linux)
> - # Host: Little-endian Alpha running Linux
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o alpha-linux-nat.o \
> - fork-child.o proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-waitpid.o linux-personality.o linux-namespaces.o'
> + NATDEPFILES='inf-ptrace.o fork-child.o proc-service.o \
> + linux-thread-db.o linux-nat.o linux-osdata.o linux-fork.o \
> + linux-procfs.o linux-ptrace.o linux-waitpid.o \
> + linux-personality.o linux-namespaces.o'
> NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> LOADLIBES='-ldl $(RDYNAMIC)'
> -
> - # doublest.c currently assumes some properties of FP arithmetic
> - # on the host which require this.
> - MH_CFLAGS='-mieee'
> ;;
> - nbsd)
> - # Host: NetBSD/alpha
> - NATDEPFILES='fork-child.o inf-ptrace.o alpha-bsd-nat.o bsd-kvm.o'
> -
> + fbsd*)
> + NATDEPFILES='fork-child.o inf-ptrace.o fbsd-nat.o'
> + HAVE_NATIVE_GCORE_HOST=1
> LOADLIBES='-lkvm'
> ;;
> - esac
> - ;;
> - arm)
> - case ${gdb_host} in
> - linux)
> - # Host: ARM based machine running GNU/Linux
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o arm-linux-nat.o \
> - aarch32-linux-nat.o proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-waitpid.o linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> + nbsd*)
> + NATDEPFILES='fork-child.o inf-ptrace.o'
> ;;
> - nbsdelf)
> - # Host: NetBSD/arm
> - NATDEPFILES='fork-child.o inf-ptrace.o arm-nbsd-nat.o'
> + obsd*)
> + NATDEPFILES='fork-child.o inf-ptrace.o'
> ;;
> - esac
> - ;;
> - i386)
> - case ${gdb_host} in
> - cygwin64)
> - # Native config information for GDB on PowerPC systems running FreeBSD.
> - NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o'
> + cygwin*)
> + NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o'
> ;;
> - cygwin)
> - MH_CFLAGS=
> - NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o'
> - XM_CLIBS=
> + mingw*)
> + NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o'
> ;;
> - darwin)
> - # Host: IA86 running Darwin
> - NATDEPFILES='fork-child.o darwin-nat.o \
> - i386-darwin-nat.o x86-nat.o x86-dregs.o amd64-nat.o darwin-nat-info.o'
> - ;;
> - fbsd64)
> - # Host: FreeBSD/amd64
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - fbsd-nat.o amd64-nat.o amd64-bsd-nat.o amd64-fbsd-nat.o \
> - bsd-kvm.o x86-nat.o x86-dregs.o x86-bsd-nat.o'
> - HAVE_NATIVE_GCORE_HOST=1
> -
> - LOADLIBES='-lkvm'
> - ;;
> - fbsd)
> - # Host: FreeBSD/i386
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - fbsd-nat.o x86-nat.o x86-dregs.o x86-bsd-nat.o i386-bsd-nat.o \
> - i386-fbsd-nat.o bsd-kvm.o'
> - NAT_FILE='nm-fbsd.h'
> - HAVE_NATIVE_GCORE_HOST=1
> -
> - LOADLIBES='-lkvm'
> - ;;
> - go32)
> - # Host: Intel x86 running DJGPP
> -
> - # We include several header files from config/djgpp
> - MH_CFLAGS='-I$(srcdir)/config/djgpp'
> -
> - NATDEPFILES='go32-nat.o x86-nat.o x86-dregs.o'
> +esac
>
> - XM_CLIBS='-ldbg'
> - ;;
> - i386gnu)
> - # Host: Intel 386 running the GNU Hurd
> - NATDEPFILES='i386-gnu-nat.o gnu-nat.o \
> +# This is where we actually filter by host and host CPU.
> +case ${gdb_host} in
> + aix)
> + case ${gdb_host_cpu} in
> + powerpc)
> + # Host: IBM PowerPC running AIX aix-thread.o is not
> + # listed in NATDEPFILES as it is pulled in by
> + # configure.
> + NATDEPFILES='fork-child.o inf-ptrace.o rs6000-nat.o'
> +
> + # When compiled with cc, for debugging, this argument
> + # should be passed. We have no idea who our current
> + # compiler is though, so we skip it.
> + # MH_CFLAGS='-bnodelcsect'
> + ;;
> + esac
> + ;;
> + alpha-linux)
> + case ${gdb_host_cpu} in
> + alpha)
> + # Host: Little-endian Alpha running Linux
> + NATDEPFILES="${NATDEPFILES} alpha-linux-nat.o"
> + # doublest.c currently assumes some properties of FP arithmetic
> + # on the host which require this.
> + MH_CFLAGS='-mieee'
> + ;;
> + esac
> + ;;
> + cygwin)
> + case ${gdb_host_cpu} in
> + i386)
> + # Native config information for GDB on i386
> + # systems running Cygwin.
> + NATDEPFILES="${NATDEPFILES} i386-windows-nat.o"
> + ;;
> + esac
> + ;;
> + cygwin64)
> + case ${gdb_host_cpu} in
> + i386)
> + # Native config information for GDB on amd64
> + # systems running Cygwin.
> + NATDEPFILES="${NATDEPFILES} amd64-windows-nat.o"
> + ;;
> + esac
> + ;;
> + darwin)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: IA86 running Darwin
> + NATDEPFILES='fork-child.o darwin-nat.o \
> + i386-darwin-nat.o x86-nat.o x86-dregs.o amd64-nat.o \
> + darwin-nat-info.o'
> + ;;
> + esac
> + ;;
> + fbsd)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: FreeBSD/i386
> + NATDEPFILES="${NATDEPFILES} x86-nat.o x86-dregs.o \
> + x86-bsd-nat.o i386-bsd-nat.o i386-fbsd-nat.o bsd-kvm.o"
> + NAT_FILE='nm-fbsd.h'
> + ;;
> + mips)
> + # Host: FreeBSD/mips
> + NATDEPFILES="${NATDEPFILES} mips-fbsd-nat.o"
> + LOADLIBES=
> + ;;
> + powerpc)
> + # Native config information for GDB on PowerPC
> + # systems running FreeBSD.
> + NATDEPFILES="${NATDEPFILES} ppc-fbsd-nat.o bsd-kvm.o"
> + ;;
> + sparc)
> + # Host: FreeBSD/sparc64
> + NATDEPFILES="${NATDEPFILES} sparc-nat.o sparc64-nat.o \
> + sparc64-fbsd-nat.o bsd-kvm.o"
> + ;;
> + esac
> + ;;
> + fbsd64)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: FreeBSD/amd64
> + NATDEPFILES="${NATDEPFILES} amd64-nat.o amd64-bsd-nat.o \
> + amd64-fbsd-nat.o bsd-kvm.o x86-nat.o x86-dregs.o x86-bsd-nat.o"
> + ;;
> + esac
> + ;;
> + go32)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: Intel x86 running DJGPP
> + # We include several header files from config/djgpp
> + MH_CFLAGS='-I$(srcdir)/config/djgpp'
> + NATDEPFILES='go32-nat.o x86-nat.o x86-dregs.o'
> + XM_CLIBS='-ldbg'
> + ;;
> + esac
> + ;;
> + i386gnu)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: Intel 386 running the GNU Hurd
> + NATDEPFILES='i386-gnu-nat.o gnu-nat.o \
> x86-nat.o x86-dregs.o fork-child.o \
> notify_S.o process_reply_S.o msg_reply_S.o \
> msg_U.o exc_request_U.o exc_request_S.o'
> - HAVE_NATIVE_GCORE_HOST=1
> + HAVE_NATIVE_GCORE_HOST=1
>
> - NAT_FILE='nm-i386gnu.h'
> - MH_CFLAGS='-D_GNU_SOURCE'
> + NAT_FILE='nm-i386gnu.h'
> + MH_CFLAGS='-D_GNU_SOURCE'
>
> - XM_CLIBS='-lshouldbeinlibc'
> + XM_CLIBS='-lshouldbeinlibc'
>
> - nat_extra_makefile_frag="${srcdir}/config/${gdb_host_cpu}/i386gnu-extra.mh"
> + nat_extra_makefile_frag="${srcdir}/config/${gdb_host_cpu}/i386gnu-extra.mh"
> + ;;
> + esac
> ;;
> - i386sol2)
> - # Host: Solaris x86
> - NATDEPFILES='fork-child.o i386-v4-nat.o i386-sol2-nat.o \
> + i386sol2)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: Solaris x86
> + NATDEPFILES='fork-child.o i386-v4-nat.o i386-sol2-nat.o \
> procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
> - HAVE_NATIVE_GCORE_HOST=1
> - ;;
> - linux64)
> - # Host: GNU/Linux x86-64
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - x86-nat.o x86-dregs.o amd64-nat.o amd64-linux-nat.o \
> - x86-linux-nat.o \
> - linux-nat.o linux-osdata.o \
> - proc-service.o linux-thread-db.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-btrace.o \
> - linux-waitpid.o linux-personality.o x86-linux.o \
> - x86-linux-dregs.o amd64-linux-siginfo.o linux-namespaces.o'
> - NAT_FILE='config/nm-linux.h'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - linux)
> - # Host: Intel 386 running GNU/Linux.
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - x86-nat.o x86-dregs.o i386-linux-nat.o x86-linux-nat.o \
> - proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-btrace.o linux-waitpid.o linux-personality.o x86-linux.o \
> - x86-linux-dregs.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - mingw64)
> - NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o amd64-windows-nat.o'
> - ;;
> - mingw)
> - MH_CFLAGS=
> - NATDEPFILES='x86-nat.o x86-dregs.o windows-nat.o i386-windows-nat.o'
> - XM_CLIBS=
> - ;;
> - nbsd64)
> - # Host: NetBSD/amd64
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - nbsd-nat.o amd64-nat.o x86-bsd-nat.o amd64-bsd-nat.o amd64-nbsd-nat.o'
> - ;;
> - nbsdelf)
> - # Host: NetBSD/i386 ELF
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - nbsd-nat.o x86-bsd-nat.o i386-bsd-nat.o i386-nbsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - nto)
> - # Host: Intel 386 running QNX.
> - NATDEPFILES='nto-procfs.o'
> - NAT_FILE='config/nm-nto.h'
> - ;;
> - obsd64)
> - # Host: OpenBSD/amd64
> - NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
> - amd64-nat.o x86-bsd-nat.o amd64-bsd-nat.o amd64-obsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - obsd)
> - # Host: OpenBSD/i386 ELF
> - NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
> - x86-bsd-nat.o i386-bsd-nat.o i386-obsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - sol2-64)
> - # Host: Solaris x86_64
> - NATDEPFILES='fork-child.o amd64-nat.o i386-v4-nat.o i386-sol2-nat.o \
> + HAVE_NATIVE_GCORE_HOST=1
> + ;;
> + esac
> + ;;
> + linux)
> + case ${gdb_host_cpu} in
> + aarch64)
> + # Host: AArch64 based machine running GNU/Linux
> + NATDEPFILES="${NATDEPFILES} aarch64-linux-nat.o \
> + aarch32-linux-nat.o aarch64-linux-hw-point.o aarch64-linux.o"
> + ;;
> + arm)
> + # Host: ARM based machine running GNU/Linux
> + NATDEPFILES="${NATDEPFILES} arm-linux-nat.o \
> + aarch32-linux-nat.o"
> + ;;
> + i386)
> + # Host: Intel 386 running GNU/Linux.
> + NATDEPFILES="${NATDEPFILES} x86-nat.o x86-dregs.o \
> + i386-linux-nat.o x86-linux-nat.o linux-btrace.o \
> + x86-linux.o x86-linux-dregs.o"
> + ;;
> + ia64)
> + # Host: Intel IA-64 running GNU/Linux
> + NATDEPFILES="${NATDEPFILES} ia64-linux-nat.o"
> + ;;
> + m32r)
> + # Host: M32R based machine running GNU/Linux
> + NATDEPFILES="${NATDEPFILES} m32r-linux-nat.o"
> + ;;
> + m68k)
> + # Host: Motorola m68k running GNU/Linux.
> + NATDEPFILES="${NATDEPFILES} m68k-linux-nat.o"
> + ;;
> + mips)
> + # Host: Linux/MIPS
> + NATDEPFILES="${NATDEPFILES} mips-linux-nat.o \
> + mips-linux-watch.o"
> + ;;
> + pa)
> + # Host: Hewlett-Packard PA-RISC machine, running Linux
> + NATDEPFILES="${NATDEPFILES} hppa-linux-nat.o"
> + ;;
> + powerpc)
> + # Host: PowerPC, running Linux
> + NATDEPFILES="${NATDEPFILES} ppc-linux-nat.o"
> + ;;
> + s390)
> + # Host: S390, running Linux
> + NATDEPFILES="${NATDEPFILES} s390-linux-nat.o"
> + ;;
> + sparc)
> + # Host: GNU/Linux SPARC
> + NATDEPFILES="${NATDEPFILES} sparc-nat.o sparc-linux-nat.o"
> + ;;
> + tilegx)
> + # Host: Tilera TILE-Gx running GNU/Linux.
> + NATDEPFILES="${NATDEPFILES} tilegx-linux-nat.o"
> + NAT_CDEPS=
> + ;;
> + xtensa)
> + # Host: Xtensa, running GNU/Linux.
> + NATDEPFILES="${NATDEPFILES} xtensa-linux-nat.o"
> + ;;
> + esac
> + ;;
> + linux64)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: GNU/Linux x86-64
> + NATDEPFILES="${NATDEPFILES} x86-nat.o x86-dregs.o \
> + amd64-nat.o amd64-linux-nat.o x86-linux-nat.o linux-btrace.o \
> + x86-linux.o x86-linux-dregs.o amd64-linux-siginfo.o"
> + ;;
> + sparc)
> + # Host: GNU/Linux UltraSPARC
> + NATDEPFILES="${NATDEPFILES} sparc-nat.o sparc64-nat.o \
> + sparc64-linux-nat.o"
> + ;;
> + esac
> + ;;
> + mingw)
> + case ${gdb_host_cpu} in
> + i386)
> + NATDEPFILES="${NATDEPFILES} i386-windows-nat.o"
> + ;;
> + esac
> + ;;
> + mingw64)
> + case ${gdb_host_cpu} in
> + i386)
> + NATDEPFILES="${NATDEPFILES} amd64-windows-nat.o"
> + ;;
> + esac
> + ;;
> + nbsd)
> + case ${gdb_host_cpu} in
> + alpha)
> + # Host: NetBSD/alpha
> + NATDEPFILES="${NATDEPFILES} alpha-bsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + mips)
> + # Host: NetBSD/mips
> + NATDEPFILES="${NATDEPFILES} mips-nbsd-nat.o"
> + ;;
> + pa)
> + # Host: NetBSD/hppa
> + NATDEPFILES="${NATDEPFILES} nbsd-nat.o hppa-nbsd-nat.o"
> + ;;
> + powerpc)
> + # Host: NetBSD/powerpc
> + NATDEPFILES="${NATDEPFILES} ppc-nbsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + sh)
> + # Host: NetBSD/sh
> + NATDEPFILES="${NATDEPFILES} sh-nbsd-nat.o"
> + ;;
> +
> + esac
> + ;;
> + nbsd64)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: NetBSD/amd64
> + NATDEPFILES="${NATDEPFILES} nbsd-nat.o amd64-nat.o \
> + x86-bsd-nat.o amd64-bsd-nat.o amd64-nbsd-nat.o"
> + ;;
> + sparc)
> + # Host: NetBSD/sparc64
> + NATDEPFILES="${NATDEPFILES} sparc64-nbsd-nat.o sparc-nat.o \
> + bsd-kvm.o"
> + ;;
> +
> + esac
> + ;;
> + nbdself)
> + case ${gdb_host_cpu} in
> + arm)
> + # Host: NetBSD/arm
> + NATDEPFILES="${NATDEPFILES} arm-nbsd-nat.o"
> + ;;
> + i386)
> + # Host: NetBSD/i386 ELF
> + NATDEPFILES="${NATDEPFILES} nbsd-nat.o x86-bsd-nat.o \
> + i386-bsd-nat.o i386-nbsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + m68k)
> + # Host: NetBSD/m68k ELF
> + NATDEPFILES="${NATDEPFILES} m68k-bsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + sparc)
> + # Host: NetBSD/sparc ELF
> + NATDEPFILES="${NATDEPFILES} sparc-nat.o sparc-nbsd-nat.o \
> + bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + vax)
> + # Host: NetBSD/vax ELF
> + NATDEPFILES="${NATDEPFILES} vax-bsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> +
> + esac
> + ;;
> + nto)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: Intel 386 running QNX.
> + NATDEPFILES='nto-procfs.o'
> + NAT_FILE='config/nm-nto.h'
> + ;;
> + esac
> + ;;
> + obsd)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: OpenBSD/i386 ELF
> + NATDEPFILES="${NATDEPFILES} obsd-nat.o x86-bsd-nat.o \
> + i386-bsd-nat.o i386-obsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + m68k)
> + # Host: OpenBSD/m68k
> + NATDEPFILES="${NATDEPFILES} m68k-bsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + m88k)
> + # Host: OpenBSD/m88k
> + NATDEPFILES="${NATDEPFILES} m88k-bsd-nat.o"
> + ;;
> + pa)
> + # Host: OpenBSD/hppa
> + NATDEPFILES="${NATDEPFILES} obsd-nat.o hppa-obsd-nat.o"
> + ;;
> + powerpc)
> + # Host: OpenBSD/powerpc
> + NATDEPFILES="${NATDEPFILES} obsd-nat.o ppc-obsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + vax)
> + # Host: OpenBSD/vax
> + NATDEPFILES="${NATDEPFILES} vax-bsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + esac
> + ;;
> + obsd64)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: OpenBSD/amd64
> + NATDEPFILES="${NATDEPFILES} obsd-nat.o amd64-nat.o \
> + x86-bsd-nat.o amd64-bsd-nat.o amd64-obsd-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + mips)
> + # Host: OpenBSD/mips64
> + NATDEPFILES="${NATDEPFILES} obsd-nat.o mips64-obsd-nat.o"
> + ;;
> + sparc)
> + # Host: OpenBSD/sparc64
> + NATDEPFILES="${NATDEPFILES} obsd-nat.o sparc64-obsd-nat.o \
> + sparc-nat.o bsd-kvm.o"
> + LOADLIBES='-lkvm'
> + ;;
> + esac
> + ;;
> + ppc64-linux)
> + case ${gdb_host_cpu} in
> + powerpc)
> + # Host: PowerPC64, running Linux
> + XM_CLIBS=
> + NATDEPFILES="${NATDEPFILES} ppc-linux-nat.o ppc-linux.o"
> + ;;
> + esac
> + ;;
> + sol2)
> + case ${gdb_host_cpu} in
> + sparc)
> + # Host: Solaris SPARC & UltraSPARC
> + NAT_FILE='nm-sol2.h'
> + NATDEPFILES='sparc-sol2-nat.o \
> + fork-child.o \
> procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
> - HAVE_NATIVE_GCORE_HOST=1
> - ;;
> - esac
> - ;;
> - ia64)
> - case ${gdb_host} in
> - linux)
> - # Host: Intel IA-64 running GNU/Linux
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - ia64-linux-nat.o \
> - proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o \
> - linux-personality.o \
> - linux-procfs.o linux-ptrace.o linux-waitpid.o \
> - linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - esac
> - ;;
> - m32r)
> - case ${gdb_host} in
> - linux)
> - # Host: M32R based machine running GNU/Linux
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - m32r-linux-nat.o proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-waitpid.o linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - esac
> - ;;
> - m68k)
> - case ${gdb_host} in
> - linux)
> - # Host: Motorola m68k running GNU/Linux.
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - m68k-linux-nat.o \
> - proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-personality.o \
> - linux-waitpid.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - nbsdelf)
> - # Host: NetBSD/m68k ELF
> - NATDEPFILES='m68k-bsd-nat.o bsd-kvm.o fork-child.o inf-ptrace.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - obsd)
> - # Host: OpenBSD/m68k
> - NATDEPFILES='m68k-bsd-nat.o bsd-kvm.o fork-child.o inf-ptrace.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - esac
> - ;;
> - m88k)
> - case ${gdb_host} in
> - obsd)
> - # Host: OpenBSD/m88k
> - NATDEPFILES='fork-child.o inf-ptrace.o m88k-bsd-nat.o'
> - ;;
> - esac
> - ;;
> - mips)
> - case ${gdb_host} in
> - fbsd)
> - # Host: FreeBSD/mips
> - NATDEPFILES='fork-child.o inf-ptrace.o fbsd-nat.o mips-fbsd-nat.o'
> - HAVE_NATIVE_GCORE_HOST=1
> - ;;
> - linux)
> - # Host: Linux/MIPS
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o mips-linux-nat.o \
> - linux-thread-db.o proc-service.o \
> - linux-nat.o linux-osdata.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-waitpid.o \
> - linux-personality.o \
> - mips-linux-watch.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - nbsd)
> - # Host: NetBSD/mips
> - NATDEPFILES='fork-child.o inf-ptrace.o mips-nbsd-nat.o'
> - ;;
> - obsd64)
> - # Host: OpenBSD/mips64
> - NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o mips64-obsd-nat.o'
> - ;;
> - esac
> - ;;
> - pa)
> - case ${gdb_host} in
> - linux)
> - # Host: Hewlett-Packard PA-RISC machine, running Linux
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - hppa-linux-nat.o proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-waitpid.o \
> - linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - nbsd)
> - # Host: NetBSD/hppa
> - NATDEPFILES='fork-child.o inf-ptrace.o nbsd-nat.o hppa-nbsd-nat.o'
> - ;;
> - obsd)
> - # Host: OpenBSD/hppa
> - NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o hppa-obsd-nat.o'
> - ;;
> - esac
> - ;;
> - powerpc)
> - case ${gdb_host} in
> - aix)
> - # Host: IBM PowerPC running AIX
> - # aix-thread.o is not listed in NATDEPFILES as it is pulled in by configure.
> - NATDEPFILES='fork-child.o inf-ptrace.o rs6000-nat.o'
> -
> - # When compiled with cc, for debugging, this argument should be passed.
> - # We have no idea who our current compiler is though, so we skip it.
> - # MH_CFLAGS='-bnodelcsect'
> - ;;
> - fbsd)
> - # Native config information for GDB on PowerPC systems running FreeBSD.
> - NATDEPFILES='fbsd-nat.o fork-child.o inf-ptrace.o ppc-fbsd-nat.o bsd-kvm.o'
> - HAVE_NATIVE_GCORE_HOST=1
> -
> - LOADLIBES='-lkvm'
> - ;;
> - linux)
> - # Host: PowerPC, running Linux
> - XM_CLIBS=
> -
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - ppc-linux-nat.o proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-waitpid.o linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - nbsd)
> - # Host: NetBSD/powerpc
> - NATDEPFILES='fork-child.o inf-ptrace.o ppc-nbsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - obsd)
> - # Host: OpenBSD/powerpc
> - NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o ppc-obsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - ppc64-linux)
> - # Host: PowerPC64, running Linux
> - XM_CLIBS=
> -
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - ppc-linux-nat.o proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-waitpid.o ppc-linux.o linux-personality.o \
> - linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - spu-linux)
> - # Target: Cell BE (PowerPC64 + SPU)
> - # This implements a 'pseudo-native' GDB running on the
> - # PPU side of the Cell BE and debugging the SPU side.
> -
> - NATDEPFILES='spu-linux-nat.o fork-child.o inf-ptrace.o \
> + HAVE_NATIVE_GCORE_HOST=1
> + ;;
> + esac
> + ;;
> + sol2-64)
> + case ${gdb_host_cpu} in
> + i386)
> + # Host: Solaris x86_64
> + NATDEPFILES='fork-child.o amd64-nat.o i386-v4-nat.o i386-sol2-nat.o \
> + procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
> + HAVE_NATIVE_GCORE_HOST=1
> + ;;
> + esac
> + ;;
> + spu-linux)
> + case ${gdb_host_cpu} in
> + powerpc)
> + # Target: Cell BE (PowerPC64 + SPU)
> + # This implements a 'pseudo-native' GDB running on the
> + # PPU side of the Cell BE and debugging the SPU side.
> + NAT_FILE=
> + NAT_CDEPS=
> + LOADLIBES=
> + NATDEPFILES='spu-linux-nat.o fork-child.o inf-ptrace.o \
> linux-procfs.o linux-ptrace.o linux-waitpid.o \
> linux-personality.o linux-namespaces.o'
> + ;;
> + esac
> ;;
> - esac
> - ;;
> - s390)
> - case ${gdb_host} in
> - linux)
> - # Host: S390, running Linux
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o s390-linux-nat.o \
> - linux-thread-db.o proc-service.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-personality.o \
> - linux-waitpid.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - esac
> - ;;
> - sh)
> - case ${gdb_host} in
> - nbsd)
> - # Host: NetBSD/sh
> - NATDEPFILES='fork-child.o inf-ptrace.o sh-nbsd-nat.o'
> - ;;
> - esac
> - ;;
> - sparc)
> - case ${gdb_host} in
> - fbsd)
> - # Host: FreeBSD/sparc64
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - fbsd-nat.o sparc-nat.o sparc64-nat.o sparc64-fbsd-nat.o \
> - bsd-kvm.o'
> - HAVE_NATIVE_GCORE_HOST=1
> -
> - LOADLIBES='-lkvm'
> - ;;
> - linux64)
> - # Host: GNU/Linux UltraSPARC
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='sparc-nat.o sparc64-nat.o sparc64-linux-nat.o \
> - fork-child.o inf-ptrace.o \
> - proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-waitpid.o \
> - linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - linux)
> - # Host: GNU/Linux SPARC
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='sparc-nat.o sparc-linux-nat.o \
> - fork-child.o inf-ptrace.o \
> - proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-waitpid.o \
> - linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - nbsd64)
> - # Host: NetBSD/sparc64
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - sparc64-nbsd-nat.o sparc-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - nbsdelf)
> - # Host: NetBSD/sparc ELF
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - sparc-nat.o sparc-nbsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - obsd64)
> - # Host: OpenBSD/sparc64
> - NATDEPFILES='fork-child.o inf-ptrace.o obsd-nat.o \
> - sparc64-obsd-nat.o sparc-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - sol2)
> - # Host: Solaris SPARC & UltraSPARC
> - NAT_FILE='nm-sol2.h'
> - NATDEPFILES='sparc-sol2-nat.o \
> - fork-child.o \
> - procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o'
> - HAVE_NATIVE_GCORE_HOST=1
> - ;;
> - esac
> - ;;
> - tilegx)
> - case ${gdb_host} in
> - linux)
> - # Host: Tilera TILE-Gx running GNU/Linux.
> - NAT_FILE='config/nm-linux.h'
> - NATDEPFILES='inf-ptrace.o fork-child.o \
> - tilegx-linux-nat.o \
> - proc-service.o linux-thread-db.o \
> - linux-nat.o linux-osdata.o linux-fork.o \
> - linux-procfs.o linux-ptrace.o linux-waitpid.o \
> - linux-personality.o linux-namespaces.o'
> -
> - # The dynamically loaded libthread_db needs access to symbols in the
> - # gdb executable.
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - esac
> - ;;
> - vax)
> - case ${gdb_host} in
> - nbsdelf)
> - # Host: NetBSD/vax ELF
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - vax-bsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - obsd)
> - # Host: OpenBSD/vax
> - NATDEPFILES='fork-child.o inf-ptrace.o \
> - vax-bsd-nat.o bsd-kvm.o'
> -
> - LOADLIBES='-lkvm'
> - ;;
> - esac
> - ;;
> - xtensa)
> - case ${gdb_host} in
> - linux)
> - # Host: Xtensa, running GNU/Linux.
> - NAT_FILE='config/nm-linux.h'
> -
> - NATDEPFILES='inf-ptrace.o fork-child.o xtensa-linux-nat.o \
> - linux-thread-db.o proc-service.o \
> - linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
> - linux-waitpid.o linux-personality.o linux-namespaces.o'
> - NAT_CDEPS='$(srcdir)/proc-service.list'
> -
> - LOADLIBES='-ldl $(RDYNAMIC)'
> - ;;
> - esac
> - ;;
> esac
> --
> 2.9.3
Pushed.
e50f25ecdb24505bccb695e6c63add45f0032b9a
--
Sergio
GPG key ID: 237A 54B1 0287 28BF 00EF 31F4 D0EB 7628 65FC 5E36
Please send encrypted e-mail if possible
http://sergiodj.net/