This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 2/2] Convert DTrace probe interface to C++ (and perform some cleanups)
- From: Sergio Durigan Junior <sergiodj at redhat dot com>
- To: GDB Patches <gdb-patches at sourceware dot org>
- Cc: Sergio Durigan Junior <sergiodj at redhat dot com>
- Date: Mon, 13 Nov 2017 12:53:17 -0500
- Subject: [PATCH 2/2] Convert DTrace probe interface to C++ (and perform some cleanups)
- Authentication-results: sourceware.org; auth=none
- References: <20171113175319.24280-1-sergiodj@redhat.com>
This patch converts the DTrace probe
interface (gdb/dtrace-probe.[ch]) to C++, and also performs some
cleanups that were on my TODO list for a while.
The main changes were the conversion of 'struct dtrace_probe' to 'class
dtrace_probe', and a new 'class dtrace_static_probe_ops' to replace the
use of 'dtrace_probe_ops'. Both classes implement the virtual methods
exported by their parents, 'class probe' and 'class static_probe_ops',
respectively. I believe it's now a bit simpler to understand the
logic behind the dtrace-probe interface.
There are several helper functions used to parse parts of a dtrace
probe, and since they are generic and don't need to know about the
probe they're working on, I decided to leave them as simple static
functions (instead of e.g. converting them to class methods).
I've also converted a few uses of "VEC" to "std::vector", which makes
the code simpler and easier to maintain. And, as usual, some cleanups
here and there.
Even though I'm sending a series of patches, they need to be tested
and committed as a single unit, because of inter-dependencies. But it
should be easier to review in separate logical units.
I've regtested this patch on BuildBot, no regressions found.
gdb/ChangeLog:
2017-11-13 Sergio Durigan Junior <sergiodj@redhat.com>
* dtrace-probe.c (struct probe_ops dtrace_probe_ops): Delete.
(dtrace_probe_arg_s): Delete type and VEC.
(dtrace_probe_enabler_s): Likewise.
(struct dtrace_probe): Replace by...
(class dtrace_static_probe_ops): ...this and...
(class dtrace_probe): ...this.
(dtrace_probe_is_linespec): Rename to...
(dtrace_static_probe_ops::is_linespec): ...this. Adjust code
to reflect change.
(dtrace_process_dof_probe): Use 'std::vector' instead of VEC.
Adjust code. Create new instance of 'dtrace_probe'.
(dtrace_build_arg_exprs): Rename to...
(dtrace_probe::build_arg_exprs): ...this. Adjust code to
reflect change.
(dtrace_get_probes): Rename to...
(dtrace_static_probe_ops::get_probes): ...this. Adjust code
to reflect change.
(dtrace_get_arg): Rename to...
(dtrace_probe::get_arg_by_number): ...this. Adjust code to
reflect change.
(dtrace_probe_is_enabled): Rename to...
(dtrace_probe::is_enabled): ...this. Adjust code to reflect
change.
(dtrace_get_probe_address): Rename to...
(dtrace_probe::get_relocated_address): ...this. Adjust code
to reflect change.
(dtrace_get_probe_argument_count): Rename to...
(dtrace_probe::get_argument_count): ...this. Adjust code to
reflect change.
(dtrace_can_evaluate_probe_arguments): Rename to...
(dtrace_probe::can_evaluate_arguments): ...this. Adjust code
to reflect change.
(dtrace_evaluate_probe_argument): Rename to...
(dtrace_probe::evaluate_argument): ...this. Adjust code to
reflect change.
(dtrace_compile_to_ax): Rename to...
(dtrace_probe::compile_to_ax): ...this. Adjust code to
reflect change.
(dtrace_probe_destroy): Delete.
(dtrace_type_name): Rename to...
(dtrace_static_probe_ops::type_name): ...this. Adjust code to
reflect change.
(dtrace_probe::get_static_ops): New method.
(dtrace_gen_info_probes_table_header): Rename to...
(dtrace_static_probe_ops::gen_info_probes_table_header):
...this. Adjust code to reflect change.
(dtrace_gen_info_probes_table_values): Rename to...
(dtrace_probe::gen_info_probes_table_values): ...this. Adjust
code to reflect change.
(dtrace_enable_probe): Rename to...
(dtrace_probe::enable_probe): ...this. Adjust code to reflect
change.
(dtrace_disable_probe): Rename to...
(dtrace_probe::disable_probe): ...this. Adjust code to reflect
change.
(struct probe_ops dtrace_probe_ops): Delete.
(dtrace_static_probe_ops::emit_info_probes_extra_fields): New
method.
(info_probes_dtrace_command): Call 'info_probes_for_spops'
instead of 'info_probes_for_ops'.
(_initialize_dtrace_probe): Use 'all_static_probe_ops' instead
of 'all_probe_ops'.
---
gdb/dtrace-probe.c | 528 +++++++++++++++++++++++++++--------------------------
1 file changed, 268 insertions(+), 260 deletions(-)
diff --git a/gdb/dtrace-probe.c b/gdb/dtrace-probe.c
index 2bbe03e4b3..b53ff7ac6c 100644
--- a/gdb/dtrace-probe.c
+++ b/gdb/dtrace-probe.c
@@ -41,10 +41,6 @@
# define SHT_SUNW_dof 0x6ffffff4
#endif
-/* Forward declaration. */
-
-extern const struct probe_ops dtrace_probe_ops;
-
/* The following structure represents a single argument for the
probe. */
@@ -60,9 +56,6 @@ struct dtrace_probe_arg
struct expression *expr;
};
-typedef struct dtrace_probe_arg dtrace_probe_arg_s;
-DEF_VEC_O (dtrace_probe_arg_s);
-
/* The following structure represents an enabler for a probe. */
struct dtrace_probe_enabler
@@ -73,39 +66,121 @@ struct dtrace_probe_enabler
CORE_ADDR address;
};
-typedef struct dtrace_probe_enabler dtrace_probe_enabler_s;
-DEF_VEC_O (dtrace_probe_enabler_s);
+/* Class that implements the static probe methods for "stap" probes. */
+
+class dtrace_static_probe_ops : public static_probe_ops
+{
+public:
+ /* See probe.h. */
+ bool is_linespec (const char **linespecp) const override;
+
+ /* See probe.h. */
+ void get_probes (std::vector<probe *> *probesp,
+ struct objfile *objfile) const override;
+
+ /* See probe.h. */
+ const char *type_name () const override;
+
+ /* See probe.h. */
+ bool emit_info_probes_extra_fields () const override;
+
+ /* See probe.h. */
+ void gen_info_probes_table_header
+ (std::vector<struct info_probe_column> *heads) const override;
+};
+
+/* DTrace static_probe_ops. */
+
+const dtrace_static_probe_ops dtrace_static_probe_ops;
/* The following structure represents a dtrace probe. */
-struct dtrace_probe
+class dtrace_probe : public probe
{
- /* Generic information about the probe. This must be the first
- element of this struct, in order to maintain binary compatibility
- with the `struct probe' and be able to fully abstract it. */
- struct probe p;
+public:
+ /* Constructor for dtrace_probe. */
+ dtrace_probe (std::string &&name_, std::string &&provider_, CORE_ADDR address_,
+ struct gdbarch *arch_,
+ std::vector<struct dtrace_probe_arg> &args_,
+ std::vector<struct dtrace_probe_enabler> &enablers_)
+ : probe (std::move (name_), std::move (provider_), address_, arch_),
+ m_args (std::move (args_)),
+ m_enablers (std::move (enablers_)),
+ m_args_expr_built (false)
+ {}
+
+ /* Destructor for dtrace_probe. */
+ ~dtrace_probe ()
+ {
+ for (struct dtrace_probe_arg arg : m_args)
+ {
+ xfree (arg.type_str);
+ xfree (arg.expr);
+ }
+ }
+
+ /* See probe.h. */
+ CORE_ADDR get_relocated_address (struct objfile *objfile) override;
+
+ /* See probe.h. */
+ unsigned get_argument_count (struct frame_info *frame) override;
+
+ /* See probe.h. */
+ int can_evaluate_arguments () const override;
+
+ /* See probe.h. */
+ struct value *evaluate_argument (unsigned n,
+ struct frame_info *frame) override;
+
+ /* See probe.h. */
+ void compile_to_ax (struct agent_expr *aexpr,
+ struct axs_value *axs_value,
+ unsigned n) override;
+
+ /* See probe.h. */
+ const static_probe_ops *get_static_ops () const override;
+
+ /* See probe.h. */
+ void gen_info_probes_table_values
+ (std::vector<const char *> *values) const override;
+
+ /* See probe.h. */
+ bool can_enable () const override
+ {
+ return true;
+ }
+
+ /* See probe.h. */
+ void enable () override;
+ /* See probe.h. */
+ void disable () override;
+
+ /* Return the Nth argument of the probe. */
+ struct dtrace_probe_arg *get_arg_by_number (unsigned n,
+ struct gdbarch *gdbarch);
+
+ /* Build the GDB internal expressiosn that, once evaluated, will
+ calculate the values of the arguments of the probe. */
+ void build_arg_exprs (struct gdbarch *gdbarch);
+
+ /* Determine whether the probe is "enabled" or "disabled". A
+ disabled probe is a probe in which one or more enablers are
+ disabled. */
+ bool is_enabled () const;
+
+private:
/* A probe can have zero or more arguments. */
- int probe_argc;
- VEC (dtrace_probe_arg_s) *args;
+ int m_argc;
+ std::vector<struct dtrace_probe_arg> m_args;
/* A probe can have zero or more "enablers" associated with it. */
- VEC (dtrace_probe_enabler_s) *enablers;
+ std::vector<struct dtrace_probe_enabler> m_enablers;
/* Whether the expressions for the arguments have been built. */
- unsigned int args_expr_built : 1;
+ bool m_args_expr_built;
};
-/* Implementation of the probe_is_linespec method. */
-
-static int
-dtrace_probe_is_linespec (const char **linespecp)
-{
- static const char *const keywords[] = { "-pdtrace", "-probe-dtrace", NULL };
-
- return probe_is_linespec_by_keyword (linespecp, keywords);
-}
-
/* DOF programs can contain an arbitrary number of sections of 26
different types. In order to support DTrace USDT probes we only
need to handle a subset of these section types, fortunately. These
@@ -322,8 +397,6 @@ dtrace_process_dof_probe (struct objfile *objfile,
char *argtab, uint64_t strtab_size)
{
int i, j, num_probes, num_enablers;
- struct cleanup *cleanup;
- VEC (dtrace_probe_enabler_s) *enablers;
char *p;
/* Each probe section can define zero or more probes of two
@@ -368,9 +441,7 @@ dtrace_process_dof_probe (struct objfile *objfile,
/* Build the list of enablers for the probes defined in this Probe
DOF section. */
- enablers = NULL;
- cleanup
- = make_cleanup (VEC_cleanup (dtrace_probe_enabler_s), &enablers);
+ std::vector<struct dtrace_probe_enabler> enablers;
num_enablers = DOF_UINT (dof, probe->dofpr_nenoffs);
for (i = 0; i < num_enablers; i++)
{
@@ -380,38 +451,32 @@ dtrace_process_dof_probe (struct objfile *objfile,
enabler.address = DOF_UINT (dof, probe->dofpr_addr)
+ DOF_UINT (dof, enabler_offset);
- VEC_safe_push (dtrace_probe_enabler_s, enablers, &enabler);
+ enablers.push_back (enabler);
}
for (i = 0; i < num_probes; i++)
{
uint32_t probe_offset
= ((uint32_t *) offtab)[DOF_UINT (dof, probe->dofpr_offidx) + i];
- struct dtrace_probe *ret =
- XOBNEW (&objfile->per_bfd->storage_obstack, struct dtrace_probe);
-
- ret->p.pops = &dtrace_probe_ops;
- ret->p.arch = gdbarch;
- ret->args_expr_built = 0;
/* Set the provider and the name of the probe. */
- ret->p.provider
- = xstrdup (strtab + DOF_UINT (dof, provider->dofpv_name));
- ret->p.name = xstrdup (strtab + DOF_UINT (dof, probe->dofpr_name));
+ const char *probe_provider
+ = strtab + DOF_UINT (dof, provider->dofpv_name);
+ const char *name = strtab + DOF_UINT (dof, probe->dofpr_name);
/* The probe address. */
- ret->p.address
+ CORE_ADDR address
= DOF_UINT (dof, probe->dofpr_addr) + DOF_UINT (dof, probe_offset);
/* Number of arguments in the probe. */
- ret->probe_argc = DOF_UINT (dof, probe->dofpr_nargc);
+ int probe_argc = DOF_UINT (dof, probe->dofpr_nargc);
/* Store argument type descriptions. A description of the type
of the argument is in the (J+1)th null-terminated string
starting at 'strtab' + 'probe->dofpr_nargv'. */
- ret->args = NULL;
+ std::vector<struct dtrace_probe_arg> args;
p = strtab + DOF_UINT (dof, probe->dofpr_nargv);
- for (j = 0; j < ret->probe_argc; j++)
+ for (j = 0; j < probe_argc; j++)
{
struct dtrace_probe_arg arg;
expression_up expr;
@@ -442,17 +507,18 @@ dtrace_process_dof_probe (struct objfile *objfile,
if (expr != NULL && expr->elts[0].opcode == OP_TYPE)
arg.type = expr->elts[1].type;
- VEC_safe_push (dtrace_probe_arg_s, ret->args, &arg);
+ args.push_back (arg);
}
- /* Add the vector of enablers to this probe, if any. */
- ret->enablers = VEC_copy (dtrace_probe_enabler_s, enablers);
+ std::vector<struct dtrace_probe_enabler> enablers_copy = enablers;
+ dtrace_probe *ret = new dtrace_probe (std::string (name),
+ std::string (probe_provider),
+ address, gdbarch,
+ args, enablers_copy);
/* Successfully created probe. */
- probesp->push_back ((struct probe *) ret);
+ probesp->push_back (ret);
}
-
- do_cleanups (cleanup);
}
/* Helper function to collect the probes described in the DOF program
@@ -555,28 +621,23 @@ dtrace_process_dof (asection *sect, struct objfile *objfile,
sect->name);
}
-/* Helper function to build the GDB internal expressiosn that, once
- evaluated, will calculate the values of the arguments of a given
- PROBE. */
+/* Implementation of 'build_arg_exprs' method. */
-static void
-dtrace_build_arg_exprs (struct dtrace_probe *probe,
- struct gdbarch *gdbarch)
+void
+dtrace_probe::build_arg_exprs (struct gdbarch *gdbarch)
{
- struct parser_state pstate;
- struct dtrace_probe_arg *arg;
- int i;
-
- probe->args_expr_built = 1;
+ m_args_expr_built = true;
/* Iterate over the arguments in the probe and build the
corresponding GDB internal expression that will generate the
value of the argument when executed at the PC of the probe. */
- for (i = 0; i < probe->probe_argc; i++)
+ for (int i = 0; i < m_argc; i++)
{
+ struct dtrace_probe_arg *arg;
struct cleanup *back_to;
+ struct parser_state pstate;
- arg = VEC_index (dtrace_probe_arg_s, probe->args, i);
+ arg = &m_args[i];
/* Initialize the expression buffer in the parser state. The
language does not matter, since we are using our own
@@ -606,138 +667,82 @@ dtrace_build_arg_exprs (struct dtrace_probe *probe,
}
}
-/* Helper function to return the Nth argument of a given PROBE. */
-
-static struct dtrace_probe_arg *
-dtrace_get_arg (struct dtrace_probe *probe, unsigned n,
- struct gdbarch *gdbarch)
-{
- if (!probe->args_expr_built)
- dtrace_build_arg_exprs (probe, gdbarch);
-
- return VEC_index (dtrace_probe_arg_s, probe->args, n);
-}
-
-/* Implementation of the get_probes method. */
+/* Implementation of 'get_arg_by_number' method. */
-static void
-dtrace_get_probes (std::vector<probe *> *probesp, struct objfile *objfile)
+struct dtrace_probe_arg *
+dtrace_probe::get_arg_by_number (unsigned n, struct gdbarch *gdbarch)
{
- bfd *abfd = objfile->obfd;
- asection *sect = NULL;
-
- /* Do nothing in case this is a .debug file, instead of the objfile
- itself. */
- if (objfile->separate_debug_objfile_backlink != NULL)
- return;
+ if (!m_args_expr_built)
+ this->build_arg_exprs (gdbarch);
- /* Iterate over the sections in OBJFILE looking for DTrace
- information. */
- for (sect = abfd->sections; sect != NULL; sect = sect->next)
- {
- if (elf_section_data (sect)->this_hdr.sh_type == SHT_SUNW_dof)
- {
- bfd_byte *dof;
-
- /* Read the contents of the DOF section and then process it to
- extract the information of any probe defined into it. */
- if (!bfd_malloc_and_get_section (abfd, sect, &dof))
- complaint (&symfile_complaints,
- _("could not obtain the contents of"
- "section '%s' in objfile `%s'."),
- sect->name, abfd->filename);
-
- dtrace_process_dof (sect, objfile, probesp,
- (struct dtrace_dof_hdr *) dof);
- xfree (dof);
- }
- }
+ return &m_args[n];
}
-/* Helper function to determine whether a given probe is "enabled" or
- "disabled". A disabled probe is a probe in which one or more
- enablers are disabled. */
+/* Implementation of the probe is_enabled method. */
-static int
-dtrace_probe_is_enabled (struct dtrace_probe *probe)
+bool
+dtrace_probe::is_enabled () const
{
- int i;
- struct gdbarch *gdbarch = probe->p.arch;
- struct dtrace_probe_enabler *enabler;
+ struct gdbarch *gdbarch = this->get_gdbarch ();
- for (i = 0;
- VEC_iterate (dtrace_probe_enabler_s, probe->enablers, i, enabler);
- i++)
- if (!gdbarch_dtrace_probe_is_enabled (gdbarch, enabler->address))
- return 0;
+ for (struct dtrace_probe_enabler enabler : m_enablers)
+ if (!gdbarch_dtrace_probe_is_enabled (gdbarch, enabler.address))
+ return false;
- return 1;
+ return true;
}
/* Implementation of the get_probe_address method. */
-static CORE_ADDR
-dtrace_get_probe_address (struct probe *probe, struct objfile *objfile)
+CORE_ADDR
+dtrace_probe::get_relocated_address (struct objfile *objfile)
{
- gdb_assert (probe->pops == &dtrace_probe_ops);
- return probe->address + ANOFFSET (objfile->section_offsets,
- SECT_OFF_DATA (objfile));
+ return this->get_address () + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_DATA (objfile));
}
-/* Implementation of the get_probe_argument_count method. */
+/* Implementation of the get_argument_count method. */
-static unsigned
-dtrace_get_probe_argument_count (struct probe *probe_generic,
- struct frame_info *frame)
+unsigned
+dtrace_probe::get_argument_count (struct frame_info *frame)
{
- struct dtrace_probe *dtrace_probe = (struct dtrace_probe *) probe_generic;
-
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
-
- return dtrace_probe->probe_argc;
+ return m_argc;
}
-/* Implementation of the can_evaluate_probe_arguments method. */
+/* Implementation of the can_evaluate_arguments method. */
-static int
-dtrace_can_evaluate_probe_arguments (struct probe *probe_generic)
+int
+dtrace_probe::can_evaluate_arguments () const
{
- struct gdbarch *gdbarch = probe_generic->arch;
+ struct gdbarch *gdbarch = this->get_gdbarch ();
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
return gdbarch_dtrace_parse_probe_argument_p (gdbarch);
}
-/* Implementation of the evaluate_probe_argument method. */
+/* Implementation of the evaluate_argument method. */
-static struct value *
-dtrace_evaluate_probe_argument (struct probe *probe_generic, unsigned n,
- struct frame_info *frame)
+struct value *
+dtrace_probe::evaluate_argument (unsigned n,
+ struct frame_info *frame)
{
- struct gdbarch *gdbarch = probe_generic->arch;
- struct dtrace_probe *dtrace_probe = (struct dtrace_probe *) probe_generic;
+ struct gdbarch *gdbarch = this->get_gdbarch ();
struct dtrace_probe_arg *arg;
int pos = 0;
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
-
- arg = dtrace_get_arg (dtrace_probe, n, gdbarch);
+ arg = this->get_arg_by_number (n, gdbarch);
return evaluate_subexp_standard (arg->type, arg->expr, &pos, EVAL_NORMAL);
}
/* Implementation of the compile_to_ax method. */
-static void
-dtrace_compile_to_ax (struct probe *probe_generic, struct agent_expr *expr,
- struct axs_value *value, unsigned n)
+void
+dtrace_probe::compile_to_ax (struct agent_expr *expr, struct axs_value *value,
+ unsigned n)
{
- struct dtrace_probe *dtrace_probe = (struct dtrace_probe *) probe_generic;
struct dtrace_probe_arg *arg;
union exp_element *pc;
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
-
- arg = dtrace_get_arg (dtrace_probe, n, expr->gdbarch);
+ arg = this->get_arg_by_number (n, expr->gdbarch);
pc = arg->expr->elts;
gen_expr (arg->expr, &pc, expr, value);
@@ -746,83 +751,40 @@ dtrace_compile_to_ax (struct probe *probe_generic, struct agent_expr *expr,
value->type = arg->type;
}
-/* Implementation of the probe_destroy method. */
-
-static void
-dtrace_probe_destroy (struct probe *probe_generic)
-{
- struct dtrace_probe *probe = (struct dtrace_probe *) probe_generic;
- struct dtrace_probe_arg *arg;
- int i;
-
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
-
- for (i = 0; VEC_iterate (dtrace_probe_arg_s, probe->args, i, arg); i++)
- {
- xfree (arg->type_str);
- xfree (arg->expr);
- }
-
- VEC_free (dtrace_probe_enabler_s, probe->enablers);
- VEC_free (dtrace_probe_arg_s, probe->args);
-}
-
-/* Implementation of the type_name method. */
+/* Implementation of the 'get_static_ops' method. */
-static const char *
-dtrace_type_name (struct probe *probe_generic)
+const static_probe_ops *
+dtrace_probe::get_static_ops () const
{
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
- return "dtrace";
-}
-
-/* Implementation of the gen_info_probes_table_header method. */
-
-static void
-dtrace_gen_info_probes_table_header (VEC (info_probe_column_s) **heads)
-{
- info_probe_column_s dtrace_probe_column;
-
- dtrace_probe_column.field_name = "enabled";
- dtrace_probe_column.print_name = _("Enabled");
-
- VEC_safe_push (info_probe_column_s, *heads, &dtrace_probe_column);
+ return &dtrace_static_probe_ops;
}
/* Implementation of the gen_info_probes_table_values method. */
-static void
-dtrace_gen_info_probes_table_values (struct probe *probe_generic,
- VEC (const_char_ptr) **ret)
+void
+dtrace_probe::gen_info_probes_table_values
+ (std::vector<const char *> *values) const
{
- struct dtrace_probe *probe = (struct dtrace_probe *) probe_generic;
const char *val = NULL;
- gdb_assert (probe_generic->pops == &dtrace_probe_ops);
-
- if (VEC_empty (dtrace_probe_enabler_s, probe->enablers))
+ if (m_enablers.empty ())
val = "always";
- else if (!gdbarch_dtrace_probe_is_enabled_p (probe_generic->arch))
+ else if (!gdbarch_dtrace_probe_is_enabled_p (this->get_gdbarch ()))
val = "unknown";
- else if (dtrace_probe_is_enabled (probe))
+ else if (this->is_enabled ())
val = "yes";
else
val = "no";
- VEC_safe_push (const_char_ptr, *ret, val);
+ values->push_back (val);
}
-/* Implementation of the enable_probe method. */
+/* Implementation of the enable method. */
-static void
-dtrace_enable_probe (struct probe *probe)
+void
+dtrace_probe::enable ()
{
- struct gdbarch *gdbarch = probe->arch;
- struct dtrace_probe *dtrace_probe = (struct dtrace_probe *) probe;
- struct dtrace_probe_enabler *enabler;
- int i;
-
- gdb_assert (probe->pops == &dtrace_probe_ops);
+ struct gdbarch *gdbarch = this->get_gdbarch ();
/* Enabling a dtrace probe implies patching the text section of the
running process, so make sure the inferior is indeed running. */
@@ -830,31 +792,23 @@ dtrace_enable_probe (struct probe *probe)
error (_("No inferior running"));
/* Fast path. */
- if (dtrace_probe_is_enabled (dtrace_probe))
+ if (this->is_enabled ())
return;
/* Iterate over all defined enabler in the given probe and enable
them all using the corresponding gdbarch hook. */
-
- for (i = 0;
- VEC_iterate (dtrace_probe_enabler_s, dtrace_probe->enablers, i, enabler);
- i++)
+ for (struct dtrace_probe_enabler enabler : m_enablers)
if (gdbarch_dtrace_enable_probe_p (gdbarch))
- gdbarch_dtrace_enable_probe (gdbarch, enabler->address);
+ gdbarch_dtrace_enable_probe (gdbarch, enabler.address);
}
/* Implementation of the disable_probe method. */
-static void
-dtrace_disable_probe (struct probe *probe)
+void
+dtrace_probe::disable ()
{
- struct gdbarch *gdbarch = probe->arch;
- struct dtrace_probe *dtrace_probe = (struct dtrace_probe *) probe;
- struct dtrace_probe_enabler *enabler;
- int i;
-
- gdb_assert (probe->pops == &dtrace_probe_ops);
+ struct gdbarch *gdbarch = this->get_gdbarch ();
/* Disabling a dtrace probe implies patching the text section of the
running process, so make sure the inferior is indeed running. */
@@ -862,57 +816,111 @@ dtrace_disable_probe (struct probe *probe)
error (_("No inferior running"));
/* Fast path. */
- if (!dtrace_probe_is_enabled (dtrace_probe))
+ if (!this->is_enabled ())
return;
/* Are we trying to disable a probe that does not have any enabler
associated? */
- if (VEC_empty (dtrace_probe_enabler_s, dtrace_probe->enablers))
- error (_("Probe %s:%s cannot be disabled: no enablers."), probe->provider, probe->name);
+ if (m_enablers.empty ())
+ error (_("Probe %s:%s cannot be disabled: no enablers."),
+ this->get_provider (), this->get_name ());
/* Iterate over all defined enabler in the given probe and disable
them all using the corresponding gdbarch hook. */
-
- for (i = 0;
- VEC_iterate (dtrace_probe_enabler_s, dtrace_probe->enablers, i, enabler);
- i++)
+ for (struct dtrace_probe_enabler enabler : m_enablers)
if (gdbarch_dtrace_disable_probe_p (gdbarch))
- gdbarch_dtrace_disable_probe (gdbarch, enabler->address);
+ gdbarch_dtrace_disable_probe (gdbarch, enabler.address);
}
-/* DTrace probe_ops. */
-
-const struct probe_ops dtrace_probe_ops =
-{
- dtrace_probe_is_linespec,
- dtrace_get_probes,
- dtrace_get_probe_address,
- dtrace_get_probe_argument_count,
- dtrace_can_evaluate_probe_arguments,
- dtrace_evaluate_probe_argument,
- dtrace_compile_to_ax,
- NULL, /* set_semaphore */
- NULL, /* clear_semaphore */
- dtrace_probe_destroy,
- dtrace_type_name,
- dtrace_gen_info_probes_table_header,
- dtrace_gen_info_probes_table_values,
- dtrace_enable_probe,
- dtrace_disable_probe
-};
+/* Implementation of the is_linespec method. */
+
+bool
+dtrace_static_probe_ops::is_linespec (const char **linespecp) const
+{
+ static const char *const keywords[] = { "-pdtrace", "-probe-dtrace", NULL };
+
+ return probe_is_linespec_by_keyword (linespecp, keywords);
+}
+
+/* Implementation of the get_probes method. */
+
+void
+dtrace_static_probe_ops::get_probes (std::vector<probe *> *probesp,
+ struct objfile *objfile) const
+{
+ bfd *abfd = objfile->obfd;
+ asection *sect = NULL;
+
+ /* Do nothing in case this is a .debug file, instead of the objfile
+ itself. */
+ if (objfile->separate_debug_objfile_backlink != NULL)
+ return;
+
+ /* Iterate over the sections in OBJFILE looking for DTrace
+ information. */
+ for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ {
+ if (elf_section_data (sect)->this_hdr.sh_type == SHT_SUNW_dof)
+ {
+ bfd_byte *dof;
+
+ /* Read the contents of the DOF section and then process it to
+ extract the information of any probe defined into it. */
+ if (!bfd_malloc_and_get_section (abfd, sect, &dof))
+ complaint (&symfile_complaints,
+ _("could not obtain the contents of"
+ "section '%s' in objfile `%s'."),
+ sect->name, abfd->filename);
+
+ dtrace_process_dof (sect, objfile, probesp,
+ (struct dtrace_dof_hdr *) dof);
+ xfree (dof);
+ }
+ }
+}
+
+/* Implementation of the type_name method. */
+
+const char *
+dtrace_static_probe_ops::type_name () const
+{
+ return "dtrace";
+}
+
+/* Implementation of the 'emit_info_probes_extra_fields' method. */
+
+bool
+dtrace_static_probe_ops::emit_info_probes_extra_fields () const
+{
+ return true;
+}
+
+/* Implementation of the gen_info_probes_table_header method. */
+
+void
+dtrace_static_probe_ops::gen_info_probes_table_header
+ (std::vector<struct info_probe_column> *heads) const
+{
+ struct info_probe_column dtrace_probe_column;
+
+ dtrace_probe_column.field_name = "enabled";
+ dtrace_probe_column.print_name = _("Enabled");
+
+ heads->push_back(dtrace_probe_column);
+}
/* Implementation of the `info probes dtrace' command. */
static void
info_probes_dtrace_command (const char *arg, int from_tty)
{
- info_probes_for_ops (arg, from_tty, &dtrace_probe_ops);
+ info_probes_for_spops (arg, from_tty, &dtrace_static_probe_ops);
}
void
_initialize_dtrace_probe (void)
{
- all_probe_ops.push_back (&dtrace_probe_ops);
+ all_static_probe_ops.push_back (&dtrace_static_probe_ops);
add_cmd ("dtrace", class_info, info_probes_dtrace_command,
_("\
--
2.13.3