This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[PATCH 4/4] gdb/riscv: Provide non-DWARF stack unwinder


Collects information during the prologue scan and uses this to unwind
registers when no DWARF information is available.

This patch has been tested by disabling the DWARF stack unwinders, and
running the complete GDB testsuite against a range of RISC-V targets.
The results are comparable to running with the DWARF unwinders in
place.

gdb/ChangeLog:

	* riscv-tdep.c: Add 'prologue-value.h' include.
	(struct riscv_unwind_cache): New struct.
	(riscv_debug_unwinder): New global.
	(riscv_scan_prologue): Update arguments, capture register details
	from prologue scan.
	(riscv_skip_prologue): Reformat arguments line, move end of
	prologue calculation into riscv_scan_prologue.
	(riscv_frame_cache): Update return type, create
	riscv_unwind_cache, scan the prologue, and fill in remaining cache
	details.
	(riscv_frame_this_id): Use frame id computed in riscv_frame_cache.
	(riscv_frame_prev_register): Use the trad_frame within the
	riscv_unwind_cache.
	(_initialize_riscv_tdep): Add 'set/show debug riscv unwinder'
	flag.
---
 gdb/ChangeLog    |  18 +++++
 gdb/riscv-tdep.c | 227 +++++++++++++++++++++++++++++++++++++++++++------------
 gdb/riscv-tdep.h |   2 +
 3 files changed, 200 insertions(+), 47 deletions(-)

diff --git a/gdb/riscv-tdep.c b/gdb/riscv-tdep.c
index b4ac83a6dd9..35ff27f2bcb 100644
--- a/gdb/riscv-tdep.c
+++ b/gdb/riscv-tdep.c
@@ -54,6 +54,7 @@
 #include "opcode/riscv-opc.h"
 #include "cli/cli-decode.h"
 #include "observable.h"
+#include "prologue-value.h"
 
 /* The stack must be 16-byte aligned.  */
 #define SP_ALIGNMENT 16
@@ -71,6 +72,29 @@ static inline bool is_ ## INSN_NAME ## _insn (long insn) \
 #include "opcode/riscv-opc.h"
 #undef DECLARE_INSN
 
+/* Cached information about a frame.  */
+
+struct riscv_unwind_cache
+{
+  /* The register from which we can calculate the frame base.  This is
+     usually $sp or $fp.  */
+  int frame_base_reg;
+
+  /* The offset from the current value in register FRAME_BASE_REG to the
+     actual frame base address.  */
+  int frame_base_offset;
+
+  /* Information about previous register values.  */
+  struct trad_frame_saved_reg *regs;
+
+  /* The id for this frame.  */
+  struct frame_id this_id;
+
+  /* The base (stack) address for this frame.  This is the stack pointer
+     value on entry to this frame before any adjustments are made.  */
+  CORE_ADDR frame_base;
+};
+
 /* Architectural name for core registers.  */
 
 static const char * const riscv_gdb_reg_names[RISCV_LAST_FP_REGNUM + 1] =
@@ -265,6 +289,11 @@ show_riscv_debug_variable (struct ui_file *file, int from_tty,
 
 static unsigned int riscv_debug_infcall = 0;
 
+/* When this is set to non-zero debugging information about stack unwinding
+   will be printed.  */
+
+static unsigned int riscv_debug_unwinder = 0;
+
 /* Read the MISA register from the target.  The register will only be read
    once, and the value read will be cached.  If the register can't be read
    from the target then a default value (0) will be returned.  If the
@@ -1240,16 +1269,34 @@ riscv_insn::decode (struct gdbarch *gdbarch, CORE_ADDR pc)
 
 static CORE_ADDR
 riscv_scan_prologue (struct gdbarch *gdbarch,
-		     CORE_ADDR start_pc, CORE_ADDR limit_pc)
+		     CORE_ADDR start_pc, CORE_ADDR end_pc,
+		     struct riscv_unwind_cache *cache)
 {
-  CORE_ADDR cur_pc, next_pc;
-  long frame_offset = 0;
+  CORE_ADDR cur_pc, next_pc, after_prologue_pc;
   CORE_ADDR end_prologue_addr = 0;
 
-  if (limit_pc > start_pc + 200)
-    limit_pc = start_pc + 200;
-
-  for (next_pc = cur_pc = start_pc; cur_pc < limit_pc; cur_pc = next_pc)
+  /* Find an upper limit on the function prologue using the debug
+     information.  If the debug information could not be used to provide
+     that bound, then use an arbitrary large number as the upper bound.  */
+  after_prologue_pc = skip_prologue_using_sal (gdbarch, start_pc);
+  if (after_prologue_pc == 0)
+    after_prologue_pc = start_pc + 100;   /* Arbitrary large number.  */
+  if (after_prologue_pc < end_pc)
+    end_pc = after_prologue_pc;
+
+  pv_t regs[RISCV_NUM_INTEGER_REGS]; /* Number of GPR.  */
+  for (int regno = 0; regno < RISCV_NUM_INTEGER_REGS; regno++)
+    regs[regno] = pv_register (regno, 0);
+  pv_area stack (RISCV_SP_REGNUM, gdbarch_addr_bit (gdbarch));
+
+  if (riscv_debug_unwinder)
+    fprintf_unfiltered
+      (gdb_stdlog,
+       "Prologue scan for function starting at %s (limit %s)\n",
+       core_addr_to_string (start_pc),
+       core_addr_to_string (end_pc));
+
+  for (next_pc = cur_pc = start_pc; cur_pc < end_pc; cur_pc = next_pc)
     {
       struct riscv_insn insn;
 
@@ -1267,10 +1314,10 @@ riscv_scan_prologue (struct gdbarch *gdbarch,
 	{
 	  /* Handle: addi sp, sp, -i
 	     or:     addiw sp, sp, -i  */
-	  if (insn.imm_signed () < 0)
-	    frame_offset += insn.imm_signed ();
-	  else
-	    break;
+          gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
+          gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
+          regs[insn.rd ()]
+            = pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
 	}
       else if ((insn.opcode () == riscv_insn::SW
 		|| insn.opcode () == riscv_insn::SD)
@@ -1282,6 +1329,11 @@ riscv_scan_prologue (struct gdbarch *gdbarch,
 	     or:     sw reg, offset(s0)
 	     or:     sd reg, offset(s0)  */
 	  /* Instruction storing a register onto the stack.  */
+          gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
+          gdb_assert (insn.rs2 () < RISCV_NUM_INTEGER_REGS);
+          stack.store (pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ()),
+                        (insn.opcode () == riscv_insn::SW ? 4 : 8),
+                        regs[insn.rs2 ()]);
 	}
       else if (insn.opcode () == riscv_insn::ADDI
 	       && insn.rd () == RISCV_FP_REGNUM
@@ -1289,6 +1341,10 @@ riscv_scan_prologue (struct gdbarch *gdbarch,
 	{
 	  /* Handle: addi s0, sp, size  */
 	  /* Instructions setting up the frame pointer.  */
+          gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
+          gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
+          regs[insn.rd ()]
+            = pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
 	}
       else if ((insn.opcode () == riscv_insn::ADD
 		|| insn.opcode () == riscv_insn::ADDW)
@@ -1299,6 +1355,9 @@ riscv_scan_prologue (struct gdbarch *gdbarch,
 	  /* Handle: add s0, sp, 0
 	     or:     addw s0, sp, 0  */
 	  /* Instructions setting up the frame pointer.  */
+          gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
+          gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
+          regs[insn.rd ()] = pv_add_constant (regs[insn.rs1 ()], 0);
 	}
       else if ((insn.rd () == RISCV_GP_REGNUM
 		&& (insn.opcode () == riscv_insn::AUIPC
@@ -1324,24 +1383,63 @@ riscv_scan_prologue (struct gdbarch *gdbarch,
 	}
       else
 	{
-	  if (end_prologue_addr == 0)
-	    end_prologue_addr = cur_pc;
+	  end_prologue_addr = cur_pc;
+	  break;
 	}
     }
 
   if (end_prologue_addr == 0)
     end_prologue_addr = cur_pc;
 
+  if (riscv_debug_unwinder)
+    fprintf_unfiltered (gdb_stdlog, "End of prologue at %s\n",
+			core_addr_to_string (end_prologue_addr));
+
+  if (cache != NULL)
+    {
+      /* Figure out if it is a frame pointer or just a stack pointer.  Also
+         the offset held in the pv_t is from the original register value to
+         the current value, which for a grows down stack means a negative
+         value.  The FRAME_BASE_OFFSET is the negation of this, how to get
+         from the current value to the original value.  */
+      if (pv_is_register (regs[RISCV_FP_REGNUM], RISCV_SP_REGNUM))
+	{
+          cache->frame_base_reg = RISCV_FP_REGNUM;
+          cache->frame_base_offset = -regs[RISCV_FP_REGNUM].k;
+	}
+      else
+	{
+          cache->frame_base_reg = RISCV_SP_REGNUM;
+          cache->frame_base_offset = -regs[RISCV_SP_REGNUM].k;
+	}
+
+      /* Assign offset from old SP to all saved registers.  As we don't
+         have the previous value for the frame base register at this
+         point, we store the offset as the address in the trad_frame, and
+         then convert this to an actual address later.  */
+      for (int i = 0; i <= RISCV_NUM_INTEGER_REGS; i++)
+	{
+	  CORE_ADDR offset;
+	  if (stack.find_reg (gdbarch, i, &offset))
+            {
+              if (riscv_debug_unwinder)
+                fprintf_unfiltered (gdb_stdlog,
+                                    "Register $%s at stack offset %ld\n",
+                                    gdbarch_register_name (gdbarch, i),
+                                    offset);
+              trad_frame_set_addr (cache->regs, i, offset);
+            }
+	}
+    }
+
   return end_prologue_addr;
 }
 
 /* Implement the riscv_skip_prologue gdbarch method.  */
 
 static CORE_ADDR
-riscv_skip_prologue (struct gdbarch *gdbarch,
-		     CORE_ADDR       pc)
+riscv_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
 {
-  CORE_ADDR limit_pc;
   CORE_ADDR func_addr;
 
   /* See if we can determine the end of the prologue via the symbol
@@ -1357,16 +1455,9 @@ riscv_skip_prologue (struct gdbarch *gdbarch,
     }
 
   /* Can't determine prologue from the symbol table, need to examine
-     instructions.  */
-
-  /* Find an upper limit on the function prologue using the debug
-     information.  If the debug information could not be used to provide
-     that bound, then use an arbitrary large number as the upper bound.  */
-  limit_pc = skip_prologue_using_sal (gdbarch, pc);
-  if (limit_pc == 0)
-    limit_pc = pc + 100;   /* MAGIC! */
-
-  return riscv_scan_prologue (gdbarch, pc, limit_pc);
+     instructions.  Pass -1 for the end address to indicate the prologue
+     scanner can scan as far as it needs to find the end of the prologue.  */
+  return riscv_scan_prologue (gdbarch, pc, ((CORE_ADDR) -1), NULL);
 }
 
 /* Implement the gdbarch push dummy code callback.  */
@@ -2444,31 +2535,63 @@ riscv_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
 /* Generate, or return the cached frame cache for the RiscV frame
    unwinder.  */
 
-static struct trad_frame_cache *
+static struct riscv_unwind_cache *
 riscv_frame_cache (struct frame_info *this_frame, void **this_cache)
 {
-  CORE_ADDR pc;
-  CORE_ADDR start_addr;
-  CORE_ADDR stack_addr;
-  struct trad_frame_cache *this_trad_cache;
+  CORE_ADDR pc, start_addr;
+  struct riscv_unwind_cache *cache;
   struct gdbarch *gdbarch = get_frame_arch (this_frame);
+  int numregs, regno;
 
   if ((*this_cache) != NULL)
-    return (struct trad_frame_cache *) *this_cache;
-  this_trad_cache = trad_frame_cache_zalloc (this_frame);
-  (*this_cache) = this_trad_cache;
+    return (struct riscv_unwind_cache *) *this_cache;
 
-  trad_frame_set_reg_realreg (this_trad_cache, gdbarch_pc_regnum (gdbarch),
-			      RISCV_RA_REGNUM);
+  cache = FRAME_OBSTACK_ZALLOC (struct riscv_unwind_cache);
+  cache->regs = trad_frame_alloc_saved_regs (this_frame);
+  (*this_cache) = cache;
 
+  /* Scan the prologue, filling in the cache.  */
+  start_addr = get_frame_func (this_frame);
   pc = get_frame_pc (this_frame);
-  find_pc_partial_function (pc, NULL, &start_addr, NULL);
-  stack_addr = get_frame_register_signed (this_frame, RISCV_SP_REGNUM);
-  trad_frame_set_id (this_trad_cache, frame_id_build (stack_addr, start_addr));
+  riscv_scan_prologue (gdbarch, start_addr, pc, cache);
+
+  /* We can now calculate the frame base address.  */
+  cache->frame_base
+    = (get_frame_register_signed (this_frame, cache->frame_base_reg) +
+       cache->frame_base_offset);
+  if (riscv_debug_unwinder)
+    fprintf_unfiltered (gdb_stdlog, "Frame base is %s ($%s + 0x%x)\n",
+                        core_addr_to_string (cache->frame_base),
+                        gdbarch_register_name (gdbarch,
+                                               cache->frame_base_reg),
+                        cache->frame_base_offset);
+
+  /* The prologue scanner sets the address of registers stored to the stack
+     as the offset of that register from the frame base.  The prologue
+     scanner doesn't know the actual frame base value, and so is unable to
+     compute the exact address.  We do now know the frame base value, so
+     update the address of registers stored to the stack.  */
+  numregs = gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch);
+  for (regno = 0; regno < numregs; ++regno)
+    {
+      if (trad_frame_addr_p (cache->regs, regno))
+	cache->regs[regno].addr += cache->frame_base;
+    }
+
+  /* The previous $pc can be found wherever the $ra value can be found.
+     The previous $ra value is gone, this would have been stored be the
+     previous frame if required.  */
+  cache->regs[gdbarch_pc_regnum (gdbarch)] = cache->regs[RISCV_RA_REGNUM];
+  trad_frame_set_unknown (cache->regs, RISCV_RA_REGNUM);
+
+  /* Build the frame id.  */
+  cache->this_id = frame_id_build (cache->frame_base, start_addr);
 
-  trad_frame_set_this_base (this_trad_cache, stack_addr);
+  /* The previous $sp value is the frame base value.  */
+  trad_frame_set_value (cache->regs, gdbarch_sp_regnum (gdbarch),
+			cache->frame_base);
 
-  return this_trad_cache;
+  return cache;
 }
 
 /* Implement the this_id callback for RiscV frame unwinder.  */
@@ -2478,10 +2601,10 @@ riscv_frame_this_id (struct frame_info *this_frame,
 		     void **prologue_cache,
 		     struct frame_id *this_id)
 {
-  struct trad_frame_cache *info;
+  struct riscv_unwind_cache *cache;
 
-  info = riscv_frame_cache (this_frame, prologue_cache);
-  trad_frame_get_id (info, this_id);
+  cache = riscv_frame_cache (this_frame, prologue_cache);
+  *this_id = cache->this_id;
 }
 
 /* Implement the prev_register callback for RiscV frame unwinder.  */
@@ -2491,10 +2614,10 @@ riscv_frame_prev_register (struct frame_info *this_frame,
 			   void **prologue_cache,
 			   int regnum)
 {
-  struct trad_frame_cache *info;
+  struct riscv_unwind_cache *cache;
 
-  info = riscv_frame_cache (this_frame, prologue_cache);
-  return trad_frame_get_register (info, this_frame, regnum);
+  cache = riscv_frame_cache (this_frame, prologue_cache);
+  return trad_frame_get_prev_register (this_frame, cache->regs, regnum);
 }
 
 /* Structure defining the RiscV normal frame unwind functions.  Since we
@@ -2823,6 +2946,16 @@ of the inferior call mechanism."),
 			     show_riscv_debug_variable,
 			     &setdebugriscvcmdlist, &showdebugriscvcmdlist);
 
+  add_setshow_zuinteger_cmd ("unwinder", class_maintenance,
+			     &riscv_debug_unwinder,  _("\
+Set riscv stack unwinding debugging."), _("\
+Show riscv stack unwinding debugging."), _("\
+When non-zero, print debugging information for the riscv specific parts\n\
+of the stack unwinding mechanism."),
+			     NULL,
+			     show_riscv_debug_variable,
+			     &setdebugriscvcmdlist, &showdebugriscvcmdlist);
+
   /* Add root prefix command for all "set riscv" and "show riscv" commands.  */
   add_prefix_cmd ("riscv", no_class, set_riscv_command,
 		  _("RISC-V specific commands."),
diff --git a/gdb/riscv-tdep.h b/gdb/riscv-tdep.h
index 8358d4e00ba..8a2454eb668 100644
--- a/gdb/riscv-tdep.h
+++ b/gdb/riscv-tdep.h
@@ -34,6 +34,8 @@ enum
   RISCV_A1_REGNUM = 11,		/* Second argument.  */
   RISCV_PC_REGNUM = 32,		/* Program Counter.  */
 
+  RISCV_NUM_INTEGER_REGS = 32,
+
   RISCV_FIRST_FP_REGNUM = 33,	/* First Floating Point Register */
   RISCV_FA0_REGNUM = 43,
   RISCV_FA1_REGNUM = RISCV_FA0_REGNUM + 1,
-- 
2.14.4


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]