This is the mail archive of the
gdb@sources.redhat.com
mailing list for the GDB project.
SIGTRAP error
- From: Rohit Agarwal <rohitrules at gmail dot com>
- To: gdb at sources dot redhat dot com
- Date: Fri, 24 Jun 2005 11:00:28 +0530
- Subject: SIGTRAP error
- Reply-to: Rohit Agarwal <rohitrules at gmail dot com>
hi,
im very new to gdb. im trying to run a test program bin_sem0 on my
IXDP425 board. im using arm-elf-gdb for this.
[root@mahesh ecoswork]# arm-elf-gdb -nw
install/tests/hal/common/current/tests/basic
GNU gdb 5.3 (eCosCentric)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(gdb) set endian big
The target is assumed to be big endian
(gdb) set remotebaud 115200
(gdb) target remote /dev/ttyS0
Remote debugging using /dev/ttyS0
0x50012954 in ?? ()
(gdb) load
Loading section .rom_vectors, size 0x40 lma 0x80000
Loading section .text, size 0x6c60 lma 0x80040
Loading section .rodata, size 0x470 lma 0x86ca0
Loading section .data, size 0x34c lma 0x87110
Start address 0x80040, load size 29788
Transfer rate: 79434 bits/sec, 300 bytes/write.
(gdb) continue
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00080044 in warm_reset ()
(gdb)
i tried looking into the archives but couldnt find nythg tht wud fit here.
plz reply soon.
ROHIT AGARWAL
--
if u dont know it, it doesnt exist