This is the mail archive of the
glibc-cvs@sourceware.org
mailing list for the glibc project.
GNU C Library master sources branch master updated. glibc-2.16-ports-merge-431-gc30e8ed
- From: siddhesh at sourceware dot org
- To: glibc-cvs at sourceware dot org
- Date: 5 Oct 2012 13:26:45 -0000
- Subject: GNU C Library master sources branch master updated. glibc-2.16-ports-merge-431-gc30e8ed
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU C Library master sources".
The branch, master has been updated
via c30e8edf7c56e55a81173da39f3e721ab17b9db6 (commit)
from c2b598a94512c5d754b25c77399032e87c1f2dd5 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://sources.redhat.com/git/gitweb.cgi?p=glibc.git;a=commitdiff;h=c30e8edf7c56e55a81173da39f3e721ab17b9db6
commit c30e8edf7c56e55a81173da39f3e721ab17b9db6
Author: Siddhesh Poyarekar <siddhesh@redhat.com>
Date: Fri Oct 5 18:52:35 2012 +0530
Unlock mutex before going back to waiting for PI mutexes
[BZ #14417]
A futex call with FUTEX_WAIT_REQUEUE_PI returns with the mutex locked
on success. If such a successful thread is pipped to the cond_lock by
another spuriously woken waiter, it could be sent back to wait on the
futex with the mutex lock held, thus causing a deadlock. So it is
necessary that the thread relinquishes the mutex before going back to
sleep.
diff --git a/NEWS b/NEWS
index 03cc6c2..bd309ba 100644
--- a/NEWS
+++ b/NEWS
@@ -13,9 +13,9 @@ Version 2.17
10038, 10631, 11438, 11607, 13412, 13542, 13629, 13679, 13696, 13717,
13741, 13939, 13966, 14042, 14090, 14150, 14151, 14154, 14157, 14166,
14173, 14195, 14237, 14251, 14252, 14283, 14298, 14303, 14307, 14328,
- 14331, 14336, 14337, 14347, 14349, 14376, 14459, 14476, 14477, 14505,
- 14510, 14516, 14518, 14519, 14530, 14532, 14538, 14543, 14544, 14545,
- 14562, 14576, 14579, 14583, 14587, 14621, 14638, 14645, 14648.
+ 14331, 14336, 14337, 14347, 14349, 14376, 14417, 14459, 14476, 14477,
+ 14505, 14510, 14516, 14518, 14519, 14530, 14532, 14538, 14543, 14544,
+ 14545, 14562, 14576, 14579, 14583, 14587, 14621, 14638, 14645, 14648.
* Support for STT_GNU_IFUNC symbols added for s390 and s390x.
Optimized versions of memcpy, memset, and memcmp added for System z10 and
diff --git a/nptl/ChangeLog b/nptl/ChangeLog
index 586e282..23b7753 100644
--- a/nptl/ChangeLog
+++ b/nptl/ChangeLog
@@ -1,3 +1,22 @@
+2012-10-05 Siddhesh Poyarekar <siddhesh@redhat.com>
+
+ [BZ #14417]
+ * Makefile (tests): New test case tst-cond24.
+ (LDFLAGS-tst-cond24): Link tst-cond24 against librt.
+ * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
+ (__pthread_cond_timedwait): Unlock mutex before going back to
+ wait in PI case.
+ * sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S
+ (__pthread_cond_wait): Likewise. Revert handling of EAGAIN
+ return from futex_wait.
+ * sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S
+ (__pthread_cond_timedwait): Unlock mutex before going back to
+ wait in PI case. Set requeue_pi flag only if wait returned 0.
+ * sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
+ (__pthread_cond_wait): Likewise. Revert handling of EAGAIN
+ return from futex_wait.
+ * tst-cond24.c: New test case.
+
2012-10-04 Roland McGrath <roland@hack.frob.com>
* pthread_create.c (start_thread): Use __madvise, not madvise.
diff --git a/nptl/Makefile b/nptl/Makefile
index b9c73b3..f21276c 100644
--- a/nptl/Makefile
+++ b/nptl/Makefile
@@ -206,7 +206,8 @@ tests = tst-typesizes \
tst-cond1 tst-cond2 tst-cond3 tst-cond4 tst-cond5 tst-cond6 tst-cond7 \
tst-cond8 tst-cond9 tst-cond10 tst-cond11 tst-cond12 tst-cond13 \
tst-cond14 tst-cond15 tst-cond16 tst-cond17 tst-cond18 tst-cond19 \
- tst-cond20 tst-cond21 tst-cond22 tst-cond23 tst-cond-except \
+ tst-cond20 tst-cond21 tst-cond22 tst-cond23 tst-cond24 \
+ tst-cond-except \
tst-robust1 tst-robust2 tst-robust3 tst-robust4 tst-robust5 \
tst-robust6 tst-robust7 tst-robust8 tst-robust9 \
tst-robustpi1 tst-robustpi2 tst-robustpi3 tst-robustpi4 tst-robustpi5 \
@@ -274,6 +275,7 @@ gen-as-const-headers = pthread-errnos.sym
LDFLAGS-pthread.so = -Wl,--enable-new-dtags,-z,nodelete,-z,initfirst
+LDFLAGS-tst-cond24 = -lrt
include ../Makeconfig
diff --git a/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S b/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
index d14d7de..6761c13 100644
--- a/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
+++ b/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
@@ -212,8 +212,23 @@ __pthread_cond_timedwait:
sete 24(%esp)
je 41f
- /* Normal and PI futexes dont mix. Use normal futex functions only
- if the kernel does not support the PI futex functions. */
+ /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns
+ successfully, it has already locked the mutex for us and the
+ pi_flag (24(%esp)) is set to denote that fact. However, if another
+ thread changed the futex value before we entered the wait, the
+ syscall may return an EAGAIN and the mutex is not locked. We go
+ ahead with a success anyway since later we look at the pi_flag to
+ decide if we got the mutex or not. The sequence numbers then make
+ sure that only one of the threads actually wake up. We retry using
+ normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal
+ and PI futexes don't mix.
+
+ Note that we don't check for EAGAIN specifically; we assume that the
+ only other error the futex function could return is EAGAIN (barring
+ the ETIMEOUT of course, for the timeout case in futex) since
+ anything else would mean an error in our function. It is too
+ expensive to do that check for every call (which is quite common in
+ case of a large number of threads), so it has been skipped. */
cmpl $-ENOSYS, %eax
jne 41f
xorl %ecx, %ecx
@@ -273,9 +288,24 @@ __pthread_cond_timedwait:
jne 9f
15: cmpl $-ETIMEDOUT, %esi
- jne 8b
+ je 28f
+
+ /* We need to go back to futex_wait. If we're using requeue_pi, then
+ release the mutex we had acquired and go back. */
+ movl 24(%esp), %edx
+ test %edx, %edx
+ jz 8b
+
+ /* Adjust the mutex values first and then unlock it. The unlock
+ should always succeed or else the kernel did not lock the mutex
+ correctly. */
+ movl dep_mutex(%ebx), %eax
+ call __pthread_mutex_cond_lock_adjust
+ xorl %edx, %edx
+ call __pthread_mutex_unlock_usercnt
+ jmp 8b
- addl $1, wakeup_seq(%ebx)
+28: addl $1, wakeup_seq(%ebx)
adcl $0, wakeup_seq+4(%ebx)
addl $1, cond_futex(%ebx)
movl $ETIMEDOUT, %esi
diff --git a/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S b/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S
index 366de69..0af06ac 100644
--- a/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S
+++ b/nptl/sysdeps/unix/sysv/linux/i386/i486/pthread_cond_wait.S
@@ -136,7 +136,6 @@ __pthread_cond_wait:
cmpl $PI_BIT, %eax
jne 18f
-90:
movl $(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %ecx
movl %ebp, %edx
xorl %esi, %esi
@@ -152,11 +151,22 @@ __pthread_cond_wait:
sete 16(%esp)
je 19f
- cmpl $-EAGAIN, %eax
- je 91f
-
- /* Normal and PI futexes dont mix. Use normal futex functions only
- if the kernel does not support the PI futex functions. */
+ /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns
+ successfully, it has already locked the mutex for us and the
+ pi_flag (16(%esp)) is set to denote that fact. However, if another
+ thread changed the futex value before we entered the wait, the
+ syscall may return an EAGAIN and the mutex is not locked. We go
+ ahead with a success anyway since later we look at the pi_flag to
+ decide if we got the mutex or not. The sequence numbers then make
+ sure that only one of the threads actually wake up. We retry using
+ normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal
+ and PI futexes don't mix.
+
+ Note that we don't check for EAGAIN specifically; we assume that the
+ only other error the futex function could return is EAGAIN since
+ anything else would mean an error in our function. It is too
+ expensive to do that check for every call (which is quite common in
+ case of a large number of threads), so it has been skipped. */
cmpl $-ENOSYS, %eax
jne 19f
xorl %ecx, %ecx
@@ -206,12 +216,12 @@ __pthread_cond_wait:
cmpl 8(%esp), %edx
jne 7f
cmpl 4(%esp), %edi
- je 8b
+ je 22f
7: cmpl %ecx, %edx
jne 9f
cmp %eax, %edi
- je 8b
+ je 22f
9: addl $1, woken_seq(%ebx)
adcl $0, woken_seq+4(%ebx)
@@ -287,6 +297,22 @@ __pthread_cond_wait:
jmp 20b
cfi_adjust_cfa_offset(-FRAME_SIZE);
+
+ /* We need to go back to futex_wait. If we're using requeue_pi, then
+ release the mutex we had acquired and go back. */
+22: movl 16(%esp), %edx
+ test %edx, %edx
+ jz 8b
+
+ /* Adjust the mutex values first and then unlock it. The unlock
+ should always succeed or else the kernel did not lock the mutex
+ correctly. */
+ movl dep_mutex(%ebx), %eax
+ call __pthread_mutex_cond_lock_adjust
+ xorl %edx, %edx
+ call __pthread_mutex_unlock_usercnt
+ jmp 8b
+
/* Initial locking failed. */
1:
#if cond_lock == 0
@@ -400,77 +426,6 @@ __pthread_cond_wait:
call __lll_unlock_wake
jmp 11b
-91:
-.LcleanupSTART2:
- /* FUTEX_WAIT_REQUEUE_PI returned EAGAIN. We need to
- call it again. */
-
- /* Get internal lock. */
- movl $1, %edx
- xorl %eax, %eax
- LOCK
-#if cond_lock == 0
- cmpxchgl %edx, (%ebx)
-#else
- cmpxchgl %edx, cond_lock(%ebx)
-#endif
- jz 92f
-
-#if cond_lock == 0
- movl %ebx, %edx
-#else
- leal cond_lock(%ebx), %edx
-#endif
-#if (LLL_SHARED-LLL_PRIVATE) > 255
- xorl %ecx, %ecx
-#endif
- cmpl $-1, dep_mutex(%ebx)
- setne %cl
- subl $1, %ecx
- andl $(LLL_SHARED-LLL_PRIVATE), %ecx
-#if LLL_PRIVATE != 0
- addl $LLL_PRIVATE, %ecx
-#endif
- call __lll_lock_wait
-
-92:
- /* Increment the cond_futex value again, so it can be used as a new
- expected value. */
- addl $1, cond_futex(%ebx)
- movl cond_futex(%ebx), %ebp
-
- /* Unlock. */
- LOCK
-#if cond_lock == 0
- subl $1, (%ebx)
-#else
- subl $1, cond_lock(%ebx)
-#endif
- je 93f
-#if cond_lock == 0
- movl %ebx, %eax
-#else
- leal cond_lock(%ebx), %eax
-#endif
-#if (LLL_SHARED-LLL_PRIVATE) > 255
- xorl %ecx, %ecx
-#endif
- cmpl $-1, dep_mutex(%ebx)
- setne %cl
- subl $1, %ecx
- andl $(LLL_SHARED-LLL_PRIVATE), %ecx
-#if LLL_PRIVATE != 0
- addl $LLL_PRIVATE, %ecx
-#endif
- call __lll_unlock_wake
-
-93:
- /* Set the rest of SYS_futex args for FUTEX_WAIT_REQUEUE_PI. */
- xorl %ecx, %ecx
- movl dep_mutex(%ebx), %edi
- jmp 90b
-.LcleanupEND2:
-
.size __pthread_cond_wait, .-__pthread_cond_wait
versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait,
GLIBC_2_3_2)
@@ -651,10 +606,6 @@ __condvar_w_cleanup:
.long .LcleanupEND-.Lsub_cond_futex
.long __condvar_w_cleanup-.LSTARTCODE
.uleb128 0
- .long .LcleanupSTART2-.LSTARTCODE
- .long .LcleanupEND2-.LcleanupSTART2
- .long __condvar_w_cleanup-.LSTARTCODE
- .uleb128 0
.long .LcallUR-.LSTARTCODE
.long .LENDCODE-.LcallUR
.long 0
diff --git a/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S b/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S
index a1c8ca8..b669abb 100644
--- a/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S
+++ b/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S
@@ -103,7 +103,7 @@ __pthread_cond_timedwait:
mov %RSI_LP, dep_mutex(%rdi)
22:
- xorl %r15d, %r15d
+ xorb %r15b, %r15b
#ifndef __ASSUME_FUTEX_CLOCK_REALTIME
# ifdef PIC
@@ -190,18 +190,39 @@ __pthread_cond_timedwait:
movl $SYS_futex, %eax
syscall
- movl $1, %r15d
+ cmpl $0, %eax
+ sete %r15b
+
#ifdef __ASSUME_REQUEUE_PI
jmp 62f
#else
- cmpq $-4095, %rax
- jnae 62f
+ je 62f
+
+ /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns
+ successfully, it has already locked the mutex for us and the
+ pi_flag (%r15b) is set to denote that fact. However, if another
+ thread changed the futex value before we entered the wait, the
+ syscall may return an EAGAIN and the mutex is not locked. We go
+ ahead with a success anyway since later we look at the pi_flag to
+ decide if we got the mutex or not. The sequence numbers then make
+ sure that only one of the threads actually wake up. We retry using
+ normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal
+ and PI futexes don't mix.
+
+ Note that we don't check for EAGAIN specifically; we assume that the
+ only other error the futex function could return is EAGAIN (barring
+ the ETIMEOUT of course, for the timeout case in futex) since
+ anything else would mean an error in our function. It is too
+ expensive to do that check for every call (which is quite common in
+ case of a large number of threads), so it has been skipped. */
+ cmpl $-ENOSYS, %eax
+ jne 62f
subq $cond_futex, %rdi
#endif
61: movl $(FUTEX_WAIT_BITSET|FUTEX_PRIVATE_FLAG), %esi
-60: xorl %r15d, %r15d
+60: xorb %r15b, %r15b
xorl %eax, %eax
/* The following only works like this because we only support
two clocks, represented using a single bit. */
@@ -248,7 +269,23 @@ __pthread_cond_timedwait:
ja 39f
45: cmpq $-ETIMEDOUT, %r14
- jne 38b
+ je 99f
+
+ /* We need to go back to futex_wait. If we're using requeue_pi, then
+ release the mutex we had acquired and go back. */
+ test %r15b, %r15b
+ jz 38b
+
+ /* Adjust the mutex values first and then unlock it. The unlock
+ should always succeed or else the kernel did not lock the
+ mutex correctly. */
+ movq %r8, %rdi
+ callq __pthread_mutex_cond_lock_adjust
+ xorl %esi, %esi
+ callq __pthread_mutex_unlock_usercnt
+ /* Reload cond_var. */
+ movq 8(%rsp), %rdi
+ jmp 38b
99: incq wakeup_seq(%rdi)
incl cond_futex(%rdi)
@@ -298,7 +335,7 @@ __pthread_cond_timedwait:
/* If requeue_pi is used the kernel performs the locking of the
mutex. */
41: movq 16(%rsp), %rdi
- testl %r15d, %r15d
+ testb %r15b, %r15b
jnz 64f
callq __pthread_mutex_cond_lock
diff --git a/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S b/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
index 6194852..ec403cd 100644
--- a/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
+++ b/nptl/sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
@@ -136,19 +136,36 @@ __pthread_cond_wait:
cmpl $PI_BIT, %eax
jne 61f
-90:
movl $(FUTEX_WAIT_REQUEUE_PI|FUTEX_PRIVATE_FLAG), %esi
movl $SYS_futex, %eax
syscall
- movl $1, %r8d
- cmpq $-EAGAIN, %rax
- je 91f
+ cmpl $0, %eax
+ sete %r8b
+
#ifdef __ASSUME_REQUEUE_PI
jmp 62f
#else
- cmpq $-4095, %rax
- jnae 62f
+ je 62f
+
+ /* When a futex syscall with FUTEX_WAIT_REQUEUE_PI returns
+ successfully, it has already locked the mutex for us and the
+ pi_flag (%r8b) is set to denote that fact. However, if another
+ thread changed the futex value before we entered the wait, the
+ syscall may return an EAGAIN and the mutex is not locked. We go
+ ahead with a success anyway since later we look at the pi_flag to
+ decide if we got the mutex or not. The sequence numbers then make
+ sure that only one of the threads actually wake up. We retry using
+ normal FUTEX_WAIT only if the kernel returned ENOSYS, since normal
+ and PI futexes don't mix.
+
+ Note that we don't check for EAGAIN specifically; we assume that the
+ only other error the futex function could return is EAGAIN since
+ anything else would mean an error in our function. It is too
+ expensive to do that check for every call (which is quite common in
+ case of a large number of threads), so it has been skipped. */
+ cmpl $-ENOSYS, %eax
+ jne 62f
# ifndef __ASSUME_PRIVATE_FUTEX
movl $FUTEX_WAIT, %esi
@@ -161,7 +178,7 @@ __pthread_cond_wait:
#else
orl %fs:PRIVATE_FUTEX, %esi
#endif
-60: xorl %r8d, %r8d
+60: xorb %r8b, %r8b
movl $SYS_futex, %eax
syscall
@@ -191,10 +208,10 @@ __pthread_cond_wait:
jne 16f
cmpq 24(%rsp), %r9
- jbe 8b
+ jbe 19f
cmpq %rax, %r9
- jna 8b
+ jna 19f
incq woken_seq(%rdi)
@@ -236,7 +253,7 @@ __pthread_cond_wait:
/* If requeue_pi is used the kernel performs the locking of the
mutex. */
11: movq 16(%rsp), %rdi
- testl %r8d, %r8d
+ testb %r8b, %r8b
jnz 18f
callq __pthread_mutex_cond_lock
@@ -253,6 +270,23 @@ __pthread_cond_wait:
xorl %eax, %eax
jmp 14b
+ /* We need to go back to futex_wait. If we're using requeue_pi, then
+ release the mutex we had acquired and go back. */
+19: testb %r8b, %r8b
+ jz 8b
+
+ /* Adjust the mutex values first and then unlock it. The unlock
+ should always succeed or else the kernel did not lock the mutex
+ correctly. */
+ movq 16(%rsp), %rdi
+ callq __pthread_mutex_cond_lock_adjust
+ movq %rdi, %r8
+ xorl %esi, %esi
+ callq __pthread_mutex_unlock_usercnt
+ /* Reload cond_var. */
+ movq 8(%rsp), %rdi
+ jmp 8b
+
/* Initial locking failed. */
1:
#if cond_lock != 0
@@ -331,69 +365,6 @@ __pthread_cond_wait:
13: movq %r10, %rax
jmp 14b
-91:
-.LcleanupSTART2:
- /* FUTEX_WAIT_REQUEUE_PI returned EAGAIN. We need to
- call it again. */
- movq 8(%rsp), %rdi
-
- /* Get internal lock. */
- movl $1, %esi
- xorl %eax, %eax
- LOCK
-#if cond_lock == 0
- cmpxchgl %esi, (%rdi)
-#else
- cmpxchgl %esi, cond_lock(%rdi)
-#endif
- jz 92f
-
-#if cond_lock != 0
- addq $cond_lock, %rdi
-#endif
- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi)
- movl $LLL_PRIVATE, %eax
- movl $LLL_SHARED, %esi
- cmovne %eax, %esi
- callq __lll_lock_wait
-#if cond_lock != 0
- subq $cond_lock, %rdi
-#endif
-92:
- /* Increment the cond_futex value again, so it can be used as a new
- expected value. */
- incl cond_futex(%rdi)
- movl cond_futex(%rdi), %edx
-
- /* Release internal lock. */
- LOCK
-#if cond_lock == 0
- decl (%rdi)
-#else
- decl cond_lock(%rdi)
-#endif
- jz 93f
-
-#if cond_lock != 0
- addq $cond_lock, %rdi
-#endif
- LP_OP(cmp) $-1, dep_mutex-cond_lock(%rdi)
- movl $LLL_PRIVATE, %eax
- movl $LLL_SHARED, %esi
- cmovne %eax, %esi
- /* The call preserves %rdx. */
- callq __lll_unlock_wake
-#if cond_lock != 0
- subq $cond_lock, %rdi
-#endif
-93:
- /* Set the rest of SYS_futex args for FUTEX_WAIT_REQUEUE_PI. */
- xorq %r10, %r10
- mov dep_mutex(%rdi), %R8_LP
- leaq cond_futex(%rdi), %rdi
- jmp 90b
-.LcleanupEND2:
-
.size __pthread_cond_wait, .-__pthread_cond_wait
versioned_symbol (libpthread, __pthread_cond_wait, pthread_cond_wait,
GLIBC_2_3_2)
@@ -547,10 +518,6 @@ __condvar_cleanup1:
.uleb128 .LcleanupEND-.LcleanupSTART
.uleb128 __condvar_cleanup1-.LSTARTCODE
.uleb128 0
- .uleb128 .LcleanupSTART2-.LSTARTCODE
- .uleb128 .LcleanupEND2-.LcleanupSTART2
- .uleb128 __condvar_cleanup1-.LSTARTCODE
- .uleb128 0
.uleb128 .LcallUR-.LSTARTCODE
.uleb128 .LENDCODE-.LcallUR
.uleb128 0
diff --git a/nptl/tst-cond24.c b/nptl/tst-cond24.c
new file mode 100644
index 0000000..2eb2df1
--- /dev/null
+++ b/nptl/tst-cond24.c
@@ -0,0 +1,249 @@
+/* Verify that condition variables synchronized by PI mutexes don't hang.
+ Copyright (C) 2012 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <time.h>
+
+#define THREADS_NUM 5
+#define MAXITER 50000
+
+static pthread_mutex_t mutex;
+static pthread_mutexattr_t mutex_attr;
+static pthread_cond_t cond;
+static pthread_t threads[THREADS_NUM];
+static int pending = 0;
+
+typedef void * (*threadfunc) (void *);
+
+void *
+thread_fun_timed (void *arg)
+{
+ int *ret = arg;
+ int rv, i;
+
+ printf ("Started thread_fun_timed[%d]\n", *ret);
+
+ for (i = 0; i < MAXITER / THREADS_NUM; i++)
+ {
+ rv = pthread_mutex_lock (&mutex);
+ if (rv)
+ {
+ printf ("pthread_mutex_lock: %s(%d)\n", strerror (rv), rv);
+ *ret = 1;
+ goto out;
+ }
+
+ while (!pending)
+ {
+ struct timespec ts;
+ clock_gettime(CLOCK_REALTIME, &ts);
+ ts.tv_sec += 20;
+ rv = pthread_cond_timedwait (&cond, &mutex, &ts);
+
+ /* There should be no timeout either. */
+ if (rv)
+ {
+ printf ("pthread_cond_wait: %s(%d)\n", strerror (rv), rv);
+ *ret = 1;
+ goto out;
+ }
+ }
+
+ pending--;
+
+ rv = pthread_mutex_unlock (&mutex);
+ if (rv)
+ {
+ printf ("pthread_mutex_unlock: %s(%d)\n", strerror (rv), rv);
+ *ret = 1;
+ goto out;
+ }
+ }
+
+ *ret = 0;
+
+out:
+ return ret;
+}
+
+void *
+thread_fun (void *arg)
+{
+ int *ret = arg;
+ int rv, i;
+
+ printf ("Started thread_fun[%d]\n", *ret);
+
+ for (i = 0; i < MAXITER / THREADS_NUM; i++)
+ {
+ rv = pthread_mutex_lock (&mutex);
+ if (rv)
+ {
+ printf ("pthread_mutex_lock: %s(%d)\n", strerror (rv), rv);
+ *ret = 1;
+ goto out;
+ }
+
+ while (!pending)
+ {
+ rv = pthread_cond_wait (&cond, &mutex);
+
+ if (rv)
+ {
+ printf ("pthread_cond_wait: %s(%d)\n", strerror (rv), rv);
+ *ret = 1;
+ goto out;
+ }
+ }
+
+ pending--;
+
+ rv = pthread_mutex_unlock (&mutex);
+ if (rv)
+ {
+ printf ("pthread_mutex_unlock: %s(%d)\n", strerror (rv), rv);
+ *ret = 1;
+ goto out;
+ }
+ }
+
+ *ret = 0;
+
+out:
+ return ret;
+}
+
+static int
+do_test_wait (threadfunc f)
+{
+ int i;
+ int rv;
+ int counter = 0;
+ int retval[THREADS_NUM];
+
+ puts ("Starting test");
+
+ rv = pthread_mutexattr_init (&mutex_attr);
+ if (rv)
+ {
+ printf ("pthread_mutexattr_init: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+
+ rv = pthread_mutexattr_setprotocol (&mutex_attr, PTHREAD_PRIO_INHERIT);
+ if (rv)
+ {
+ printf ("pthread_mutexattr_setprotocol: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+
+ rv = pthread_mutex_init (&mutex, &mutex_attr);
+ if (rv)
+ {
+ printf ("pthread_mutex_init: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+
+ rv = pthread_cond_init (&cond, NULL);
+ if (rv)
+ {
+ printf ("pthread_cond_init: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+
+ for (i = 0; i < THREADS_NUM; i++)
+ {
+ retval[i] = i;
+ rv = pthread_create (&threads[i], NULL, f, &retval[i]);
+ if (rv)
+ {
+ printf ("pthread_create: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+ }
+
+ for (; counter < MAXITER; counter++)
+ {
+ rv = pthread_mutex_lock (&mutex);
+ if (rv)
+ {
+ printf ("pthread_mutex_lock: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+
+ if (!(counter % 100))
+ printf ("counter: %d\n", counter);
+ pending += 1;
+
+ rv = pthread_cond_signal (&cond);
+ if (rv)
+ {
+ printf ("pthread_cond_signal: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+
+ rv = pthread_mutex_unlock (&mutex);
+ if (rv)
+ {
+ printf ("pthread_mutex_unlock: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+ }
+
+ for (i = 0; i < THREADS_NUM; i++)
+ {
+ void *ret;
+ rv = pthread_join (threads[i], &ret);
+ if (rv)
+ {
+ printf ("pthread_join: %s(%d)\n", strerror (rv), rv);
+ return 1;
+ }
+ if (ret && *(int *)ret)
+ {
+ printf ("Thread %d returned with an error\n", i);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int
+do_test (void)
+{
+ puts ("Testing pthread_cond_wait");
+ int ret = do_test_wait (thread_fun);
+ if (ret)
+ return ret;
+
+ puts ("Testing pthread_cond_timedwait");
+ return do_test_wait (thread_fun_timed);
+}
+
+#define TIMEOUT 10
+#define TEST_FUNCTION do_test ()
+#include "../test-skeleton.c"
-----------------------------------------------------------------------
Summary of changes:
NEWS | 6 +-
nptl/ChangeLog | 19 ++
nptl/Makefile | 4 +-
.../sysv/linux/i386/i486/pthread_cond_timedwait.S | 38 +++-
.../unix/sysv/linux/i386/i486/pthread_cond_wait.S | 117 +++-------
.../sysv/linux/x86_64/pthread_cond_timedwait.S | 51 ++++-
.../unix/sysv/linux/x86_64/pthread_cond_wait.S | 121 ++++------
nptl/tst-cond24.c | 249 ++++++++++++++++++++
8 files changed, 430 insertions(+), 175 deletions(-)
create mode 100644 nptl/tst-cond24.c
hooks/post-receive
--
GNU C Library master sources