This is the mail archive of the guile@sourceware.cygnus.com mailing list for the Guile project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: libguile collect2


Sorry for the repost, but it seems I forgot to attach the logs.

Adam J Henry [hank@cusa.dyndns.org] wrote:
> I have a question about a compiling error I receive, and was hoping that 
> if someone can answer this question, they would respond to my return 
> address as well as to this list.
> 
> Attached to this message are log files of the `./configure` and `make`
> commands.  I appreciate anyone's insight(s).

-- 
[-=-=-=-=-=-=-=-=-=-=- adam j henry =-=-=-=-=-=-=-=-=-=-=]
| [http: www.heidelberg.edu/~ahenry]   [pgp: 0x92B1EDF5] |
| [mailto: ahenry@heidelberg.edu]         [icq: 5794025] |
[-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:572: checking for a BSD compatible install
configure:625: checking whether build environment is sane
configure:682: checking whether make sets ${MAKE}
configure:721: checking for working aclocal
configure:734: checking for working autoconf
configure:747: checking for working automake
configure:760: checking for working autoheader
configure:773: checking for working makeinfo
configure:787: checking whether to enable maintainer-specific portions of Makefiles
configure:850: checking for gcc
configure:927: checking whether the C compiler (gcc  ) works
configure:941: gcc -o conftest    conftest.c  1>&5
configure:961: checking whether the C compiler (gcc  ) is a cross-compiler
configure:966: checking whether we are using GNU C
configure:990: checking whether gcc accepts -g
configure:1018: checking how to run the C preprocessor
configure:1131: checking host system type
configure:1154: checking for ranlib
configure:1193: checking for ld used by GCC
configure:1250: checking if the linker (/usr/i486-linux/bin/ld) is GNU ld
configure:1266: checking for BSD-compatible nm
configure:1303: checking whether ln -s works
configure:1371: checking for AIX
configure:1395: checking for POSIXized ISC
configure:1417: checking for minix/config.h
configure:1466: checking for working const
configure:1541: checking for inline
configure:1582: checking for ANSI C header files
configure:1690: checking for dirent.h that defines DIR
configure:1728: checking for opendir in -ldir
configure:1811: checking whether time.h and sys/time.h may both be included
configure:1846: checking for sys/wait.h that is POSIX.1 compatible
configure:1891: checking for libc.h
configure:1891: checking for limits.h
configure:1891: checking for malloc.h
configure:1891: checking for memory.h
configure:1891: checking for string.h
configure:1891: checking for regex.h
configure:1891: checking for rxposix.h
configure:1891: checking for rx/rxposix.h
configure:1891: checking for sys/ioctl.h
configure:1891: checking for sys/select.h
configure:1891: checking for sys/time.h
configure:1891: checking for sys/timeb.h
configure:1891: checking for sys/times.h
configure:1891: checking for sys/types.h
configure:1891: checking for sys/utime.h
configure:1891: checking for time.h
configure:1891: checking for unistd.h
configure:1891: checking for utime.h
configure:1932: checking for libc.h
configure:1932: checking for unistd.h
configure:1969: checking whether libc.h and unistd.h can be included together
configure:2017: checking for uid_t in sys/types.h
configure:2051: checking type of array argument to getgroups
configure:2122: checking return type of signal handlers
configure:2163: checking for mode_t
configure:2197: checking for main in -lm
configure:2242: checking for gethostbyname
configure:2346: checking for connect
configure:2448: checking for tgoto in -ltermcap
configure:2495: checking for readline in -lreadline
configure:2544: checking for rl_clear_signals
configure:2544: checking for rl_cleanup_after_signal
configure:2598: checking for rl_getc_function pointer in readline
configure:2641: checking for dlopen in -ldl
configure:2691: checking for dlopen
configure:2931: checking for underscore before symbols
configure:3003: checking for ctermid
configure:3003: checking for ftime
configure:3003: checking for getcwd
configure:3003: checking for geteuid
configure:3003: checking for gethostent
configure:3003: checking for gettimeofday
configure:3003: checking for lstat
configure:3003: checking for mkdir
configure:3003: checking for mknod
configure:3003: checking for nice
configure:3003: checking for readlink
configure:3003: checking for rename
configure:3003: checking for rmdir
configure:3003: checking for select
configure:3003: checking for setegid
configure:3003: checking for seteuid
configure:3003: checking for setlocale
configure:3003: checking for setpgid
configure:3003: checking for setsid
configure:3003: checking for sigaction
configure:3003: checking for strftime
configure:3003: checking for strptime
configure:3003: checking for symlink
configure:3003: checking for sync
configure:3003: checking for tcgetpgrp
configure:3003: checking for tcsetpgrp
configure:3003: checking for times
configure:3003: checking for uname
configure:3003: checking for waitpid
configure:3003: checking for bzero
configure:3003: checking for strdup
configure:3003: checking for system
configure:3003: checking for usleep
configure:3067: checking for strptime declaration
configure:3098: checking for bzero declaration
configure:3129: checking for sleep declaration
configure:3160: checking for usleep declaration
configure:3193: checking return type of usleep
configure:3227: checking for sys/un.h
configure:3268: checking for socketpair
configure:3268: checking for getgroups
configure:3268: checking for setpwent
configure:3268: checking for pause
configure:3268: checking for tzset
configure:3327: checking for sethostent
configure:3327: checking for endhostent
configure:3327: checking for getnetent
configure:3327: checking for setnetent
configure:3327: checking for endnetent
configure:3327: checking for getprotoent
configure:3327: checking for endprotoent
configure:3327: checking for getservent
configure:3327: checking for endservent
configure:3327: checking for getnetbyaddr
configure:3327: checking for getnetbyname
configure:3327: checking for inet_lnaof
configure:3327: checking for inet_makeaddr
configure:3327: checking for inet_netof
configure:3382: checking for restartable system calls
configure:3422: checking for regcomp
configure:3573: checking for inet_aton
configure:3573: checking for putenv
configure:3573: checking for strerror
configure:3634: checking for working alloca.h
configure:3667: checking for alloca
configure:3863: checking for st_rdev in struct stat
configure:3897: checking for st_blksize in struct stat
configure:3934: checking for st_blocks in struct stat
configure:3968: checking whether struct tm is in sys/time.h or time.h
configure:4002: checking for tm_zone in struct tm
configure:4073: checking whether we need POSIX to get struct utimbuf
configure:4129: gcc -o conftest -g -O2   conftest.c -ldl -lm  1>&5
configure: failed program was:
#line 4123 "configure"
#include "confdefs.h"
aux (l) unsigned long l;
	     { int x; exit (l >= ((unsigned long)&x)); }
	   main () { int q; aux((unsigned long)&q); }
configure:4144: checking whether floats fit in longs
configure:4190: checking for struct linger
configure:4231: checking how to set a stream file descriptor
configure:4313: checking how to get buffer char count from FILE structure
configure:4477: checking whether to support threads
configure:4645: checking for mawk
Making all in ice-9
make[1]: Entering directory `/usr/local/src/gnome/guile-1.3/ice-9'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/local/src/gnome/guile-1.3/ice-9'
Making all in qt
make[1]: Entering directory `/usr/local/src/gnome/guile-1.3/qt'
Making all in md
make[2]: Entering directory `/usr/local/src/gnome/guile-1.3/qt/md'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/gnome/guile-1.3/qt/md'
Making all in time
make[2]: Entering directory `/usr/local/src/gnome/guile-1.3/qt/time'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/local/src/gnome/guile-1.3/qt/time'
make[1]: Leaving directory `/usr/local/src/gnome/guile-1.3/qt'
Making all in libguile
make[1]: Entering directory `/usr/local/src/gnome/guile-1.3/libguile'
/bin/sh ../libtool --mode=link gcc -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes  -o guile  guile.o libguile.la  -ldl -lm 
gcc -g -O2 -Wall -Wpointer-arith -Wmissing-prototypes -o .libs/guile guile.o -Wl,--rpath -Wl,/usr/local/lib .libs/libguile.so -ldl -lm -ldl -lm
.libs/libguile.so: undefined reference to `rl_deprep_term_function'
.libs/libguile.so: undefined reference to `rl_instream'
.libs/libguile.so: undefined reference to `rl_redisplay'
.libs/libguile.so: undefined reference to `rl_completion_entry_function'
.libs/libguile.so: undefined reference to `readline'
.libs/libguile.so: undefined reference to `_rl_kill_kbd_macro'
.libs/libguile.so: undefined reference to `rl_getc_function'
.libs/libguile.so: undefined reference to `rl_pending_input'
.libs/libguile.so: undefined reference to `rl_redisplay_function'
.libs/libguile.so: undefined reference to `rl_outstream'
.libs/libguile.so: undefined reference to `free_undo_list'
.libs/libguile.so: undefined reference to `add_history'
.libs/libguile.so: undefined reference to `filename_completion_function'
.libs/libguile.so: undefined reference to `current_history'
.libs/libguile.so: undefined reference to `rl_clear_message'
.libs/libguile.so: undefined reference to `_rl_init_argument'
collect2: ld returned 1 exit status
make[1]: *** [guile] Error 1
make[1]: Leaving directory `/usr/local/src/gnome/guile-1.3/libguile'
make: *** [all-recursive] Error 1

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]