Re: Problems with Insight & ARM Angell

["Andy Hare" <andy at hare dot u-net dot com>]

Fernando,

    Thanks for the tip, the latest dll cured the problem with remote debug
via ANGEL. I have now not a problem with stepping through the code using
insight. I have picked up the latest diffs and will be applying them when I
get some time.
    Now the only problems I have is the code I compile not being the code I
run but this is due to a problem with not understanding the code. I am using
the EB01 from ATMEL and converting the AT91 library they issue to run under
the GCC toolset, some of the defines are not as obvious as they would seem
but I am getting closer.

    Cheers again, and if you need any testing doing I will help if I can.

Andy Hare

----- Original Message -----
From: Fernando Nasser <fnasser@cygnus.com>
To: Andy Hare <andy@hare.u-net.com>
Cc: Insight Mail list <insight@sourceware.cygnus.com>
Sent: Monday, December 13, 1999 11:24 PM
Subject: Re: Problems with Insight & ARM Angell


> Andy Hare wrote:
> >
> >     I have compiled the latest Insight (07/12/99) to target the ARM
> > processor under NT and cygwin b20.1. The simulator runs fine without any
> > problems but the connect to an RDI target (ATMEL EB01 development board
> > running ANGEL) never returns. I get the signup messages from ANGEL but
> > control does not return.
> >
>
> Hi Andy,
>
> Please download the latest cygwin1.dll snapshot from our site.
> gdb should be able to connect properly to the board after you upgrade
> your dll.
>
> >     I have a copy of the ecos toolset for ARM and have added the patches
> > from Grant Edwards, re-compiled and this works after a fashion, it does
> > actually allow the code to be loaded onto the development board, but
will
> > not step, continue does however work.
> >
>
> What exactly do you mean by "will not step"?
>
> BTW, the latest gdb snapshot has Grant's patches incorporated.
>
> >     So I know that GDB will talk to the board and run, but I would
really
> > like to get insight working, is there anything I can do to find out
where it
> > is failing and thus help the development effort. If anyone can point me
at
> > the next step then I will try it and get back to you all.
> >
>
> At least a few of us are using it with no major problems.
> Please let me know if you still have problems after the updates.
> You can e-mail me directly.  Please send me the exact versions of what
> compiler, gdb, cygwin dll you are using.  What you see on your screen
> will also help.
>
> Regards,
> Fernando
>
> --
> Fernando Nasser
> Cygnus Solutions - Toronto Office       E-Mail:  fnasser@cygnus.com
> 2323 Yonge Street, Suite #300           Tel:  416-482-2661 ext. 311
> Toronto, Ontario   M4P 2C9              Fax:  416-482-6299
>
>