This is the mail archive of the insight@sources.redhat.com mailing list for the Insight project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: insight does not start


Thanks for your reply, however, what else despite of the correct
PATH variable can be done to ensure that the `correct' versions of
tcl/tk/... are taken?

Here is my PATH:

.:/usr/users/bauer/bin:/usr/users/bauer/opt/insight-5.0/bin:/usr/local/bin

In /usr/local/bin the other tcl/tk installation is located.

Here is the content of my $HOME/opt/insight-5.0/bin dir:

-rwxr-xr-x   1 bauer    users       32768 Aug  8 09:40 tclsh
-rwxr-xr-x   1 bauer    users      720896 Aug  8 09:40 itclsh3.0
-rwxr-xr-x   1 bauer    users     1081344 Aug  8 09:40 itkwish3.0
-rwxr-xr-x   1 bauer    users       65536 Aug  8 09:41 wish
-rwxr-xr-x   1 bauer    users        2121 Aug  8 09:43 tixindex
-rw-r--r--   1 bauer    users     3981312 Aug  8 09:43 tixwish4.1.8.0
-rwxr-xr-x   1 bauer    users    20357120 Aug  8 09:44 gdb


And here the content of the appropriate ../lib dir:

-rwxr-xr-x   1 bauer    users         621 Aug  8 09:40 libbfd.la
-rw-r--r--   1 bauer    users     2172010 Aug  8 09:40 libbfd.a
-rwxr-xr-x   1 bauer    users         633 Aug  8 09:40 libopcodes.la
-rw-r--r--   1 bauer    users      188256 Aug  8 09:40 libopcodes.a
-rw-r--r--   1 bauer    users        5321 Aug  8 09:40 tclConfig.sh
-r-xr-xr-x   1 bauer    users     4201740 Aug  8 09:40 libtcl8.0.a
-r-xr-xr-x   1 bauer    users      873470 Aug  8 09:40 libitcl3.0.a
-rw-r--r--   1 bauer    users        1781 Aug  8 09:40 itclConfig.sh
-r-xr-xr-x   1 bauer    users      414700 Aug  8 09:40 libitk3.0.a
-rw-r--r--   1 bauer    users        1678 Aug  8 09:40 itkConfig.sh
-rw-rw-r--   1 bauer    users       58408 Aug  8 09:41 libmmalloc.a
-rw-rw-r--   1 bauer    users      519418 Aug  8 09:41 libiberty.a
-r-xr-xr-x   1 bauer    users     9245520 Aug  8 09:41 libtk8.0.a
-rw-r--r--   1 bauer    users        2726 Aug  8 09:41 tkConfig.sh
-rw-r--r--   1 bauer    users     5028564 Aug  8 09:43 libtixsam4.1.8.0.a
-rw-r--r--   1 bauer    users     4321476 Aug  8 09:43 libtix4.1.8.0.a

As far as I see, everything seems to be there ...

Any further ideas?

Holger


>>>>> "Keith" == Keith Seitz <kseitz@firetalk.com> writes:

    Keith> Holger Bauer wrote:
    >>  Hi,
    >> 
    >> I've compiled and installed insight-5.0. Everything is
    >> installed in $HOME/opt/insight-5.0. My PATH variable is set
    >> correctly to ensure that binaries from the
    >> $HOME/opt/insight-5.0/bin are chosen first.
    >> 
    >> However, if I run gdb I get the following error message:
    >> 
    >> Itcl_Init failed: called "tcl_findLibrary" with too many
    >> arguments
    >> 

    Keith> This sounds like your getting the wrong version of Tcl. If
    Keith> you've installed Insight, make certain that you've also
    Keith> installed the versions of Tcl, Tk, Tix, and Itcl that come
    Keith> with it. You MUST use these versions.

    Keith> Keith


-- 
 ------------------------------------------------
|  Holger Bauer     | Univ. of Stuttgart, ITSM   |
|  Dipl.-Ing.       | 70550 Stuttgart, Germany   |
|  phone +49.711.685-3549, FAX +49.711.685-3280  |
|  http://www.itsm.uni-stuttgart.de/staff/bauer/ |
 ------------------------------------------------
 "Experience comes from bad judgment" Mark Twain

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: PGPfreeware 5.0i for non-commercial use

mQBNAzG+jiIAAAECANHt3Hyn5UhgjfjqICp5sb0Dl17joBjlBmACJsFgSrD+oMmi
ctNh02EUUe0yc+btxr4DvYHuJlZDoNQOgGYMiuEABRG0KkhvbGdlciBCYXVlciA8
YmF1ZXJAaXRzbS51bmktc3R1dHRnYXJ0LmRlPokAVQMFEDG+jiOg1A6AZgyK4QEB
6mAB/izSAddeEdDGc3WhMO6Z1B8+rGSR4x78LDbkF/ZSwvI1yMP/QzDm/ClfuSJE
zvJPNens3WjYgMozburKkx1maPk=
=IJ+W
-----END PGP PUBLIC KEY BLOCK-----

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]