This is the mail archive of the
insight@sourceware.org
mailing list for the Insight project.
Insight (probably gdb) crashes on thumb-2 startup assembly code
- From: Gene Smith <gds at chartertn dot net>
- To: insight at sources dot redhat dot com
- Date: Sat, 26 Feb 2011 02:39:58 -0500
- Subject: Insight (probably gdb) crashes on thumb-2 startup assembly code
When I step into my very early startup code I quickly see this crash in
gdb or insight:
(gdb) lodnew #<-- my gdbinit macro to load my code
Loading section .isr_vector, size 0x260 lma 0x0
Loading section .bmark, size 0x24 lma 0x260
Loading section .text, size 0x3888 lma 0x10030000
Loading section .data, size 0x4 lma 0x10033888
Loading section .init_array, size 0x4 lma 0x10040004
Start address 0x0, load size 15124
Transfer rate: 51 KB/sec, 1008 bytes/write.
Loading section .sec1, size 0x10000 lma 0x10030000
Start address 0x0, load size 65536
Transfer rate: 52 KB/sec, 1365 bytes/write.
(gdb) si
0x0000009c in SET_UP ()
(gdb) si
0x0000009e in SET_UP ()
(gdb) si
../../insight_sources/gdb/regcache.c:182: internal-error: register_size:
Assertion `regnum >= 0 && regnum < (gdbarch_num_regs (gdbarch) +
gdbarch_num_pseudo_regs (gdbarch))' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This is running the insight or gdb built from a recent insight cvs
snapshot:GNU gdb (GDB) 7.2.50.20110121-cvs
This GDB was configured as "--host=x86_64-unknown-linux-gnu
--target=arm-none-eabi".
Assembly code associated with C instructions (also thumb-2) has no
problem, just the startup pure assembly code.
I can step through the same startup code with insight 6.8.1 with no
crash but it has problems decoding it as thumb-2.
I suspect this is a gdb problem and not really related to insight, but
thought I would ask here first.
-gene