This is the mail archive of the
newlib@sources.redhat.com
mailing list for the newlib project.
[RFA] Change how CC, CFLAGS get set
- From: Christopher Faylor <me at cgf dot cx>
- To: newlib at sourceware dot org
- Date: Sun, 27 Jun 2004 15:38:13 -0400
- Subject: [RFA] Change how CC, CFLAGS get set
I just found out that, when building for cygwin, cd'ing to my newlib
build directory, and typing "make", I was not getting the same
environment as when building from the top-level. The reason is that the
top-level makefile correctly puts cygwin include directories first while
the newlib makefile, when not overridden, puts them last. Attempting to
fix this turned out to be tricky but I think the below patch does it.
The patch changes things so that all of the C compiler's flags are now
in NEWLIB_CFLAGS rather than some conditionally showing up in the
CC_FOR_NEWLIB and some in NEWLIB_CFLAGS. IMO this is a good thing. I
think that CC should just be the compiler and not the compiler + flags.
YMMV.
Anyway, after this change CC_FOR_NEWLIB just turns out to be "CC", so
maybe the right change is to get rid of CC_FOR_NEWLIB, too. I'll do
that if the PTB (Hi, Jeff) think it's a good idea.
Ok to checkin?
cgf
2004-06-27 Christopher Faylor <cgf@timesys.com>
* configure.in: Move NEWLIB_FOR_CC test to acinclude.m4.
* configure: Regenerate.
* configure.host: Put cygwin include search first rather than last.
* acinclude.m4: Set NEWLIB_FOR_CC here. Don't modify CC. Just add
stuff to CFLAGS.
* aclocal.m4: Regenerate.
Index: acinclude.m4
===================================================================
RCS file: /cvs/uberbaum/newlib/acinclude.m4,v
retrieving revision 1.17
diff -d -u -p -r1.17 acinclude.m4
--- acinclude.m4 25 Jun 2004 20:32:30 -0000 1.17
+++ acinclude.m4 27 Jun 2004 19:16:56 -0000
@@ -154,6 +154,13 @@ AM_MAINTAINER_MODE
if false; then
AC_EXEEXT
fi
+# These get added in the top-level configure.in, except in the case where
+# newlib is being built natively.
+LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
+abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
+if test -z "${LIBC_INCLUDE_GREP}"; then
+ newlib_cflags="$newlib_cflags -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
+fi
. [$]{newlib_basedir}/configure.host
Index: aclocal.m4
===================================================================
RCS file: /cvs/uberbaum/newlib/aclocal.m4,v
retrieving revision 1.18
diff -d -u -p -r1.18 aclocal.m4
--- aclocal.m4 25 Jun 2004 20:32:31 -0000 1.18
+++ aclocal.m4 27 Jun 2004 19:16:56 -0000
@@ -1,6 +1,6 @@
-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
+dnl aclocal.m4 generated automatically by aclocal 1.4
-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
@@ -166,6 +166,13 @@ AM_MAINTAINER_MODE
if false; then
AC_EXEEXT
fi
+# These get added in the top-level configure.in, except in the case where
+# newlib is being built natively.
+LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
+abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
+if test -z "${LIBC_INCLUDE_GREP}"; then
+ newlib_cflags="$newlib_cflags -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
+fi
. [$]{newlib_basedir}/configure.host
@@ -207,9 +214,8 @@ AC_SUBST(sys_dir)
dnl Usage:
dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
PACKAGE=[$1]
AC_SUBST(PACKAGE)
VERSION=[$2]
@@ -225,47 +231,18 @@ AC_REQUIRE([AM_SANITY_CHECK])
AC_REQUIRE([AC_ARG_PROGRAM])
dnl FIXME This is truly gross.
missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
AC_REQUIRE([AC_PROG_MAKE_SET])])
-# Copyright 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.4-p6])])
-
#
# Check to make sure that the build environment is sane.
#
-AC_DEFUN([AM_SANITY_CHECK],
+AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
@@ -306,7 +283,7 @@ AC_MSG_RESULT(yes)])
dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
dnl The program must properly implement --version.
-AC_DEFUN([AM_MISSING_PROG],
+AC_DEFUN(AM_MISSING_PROG,
[AC_MSG_CHECKING(for working $2)
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
@@ -322,7 +299,7 @@ AC_SUBST($1)])
# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
+AC_DEFUN(AM_CONDITIONAL,
[AC_SUBST($1_TRUE)
AC_SUBST($1_FALSE)
if $2; then
@@ -338,7 +315,7 @@ fi])
# serial 1
-AC_DEFUN([AM_MAINTAINER_MODE],
+AC_DEFUN(AM_MAINTAINER_MODE,
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode is disabled by default
AC_ARG_ENABLE(maintainer-mode,
@@ -355,7 +332,7 @@ AC_DEFUN([AM_MAINTAINER_MODE],
# Like AC_CONFIG_HEADER, but automatically create stamp file.
-AC_DEFUN([AM_CONFIG_HEADER],
+AC_DEFUN(AM_CONFIG_HEADER,
[AC_PREREQ([2.12])
AC_CONFIG_HEADER([$1])
dnl When config.status generates a header, we must update the stamp-h file.
@@ -377,59 +354,27 @@ done<<>>dnl>>)
changequote([,]))])
-# serial 46 AC_PROG_LIBTOOL
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([LT_AC_PROG_GCJ],
- [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])])
-
-AC_DEFUN([_AC_PROG_LIBTOOL],
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -440,43 +385,32 @@ AC_SUBST(LIBTOOL)dnl
exec 5>>./config.log
])
-AC_DEFUN([AC_LIBTOOL_SETUP],
+AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
dnl
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
esac
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
@@ -486,20 +420,14 @@ AC_ARG_ENABLE(libtool-lock,
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-AC_ARG_WITH(pic,
- [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
- pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case $host in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
+ case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
@@ -514,31 +442,12 @@ case $host in
rm -rf conftest*
;;
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_RESTORE])
+ [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
@@ -546,56 +455,33 @@ ia64-*-hpux*)
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one
- AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
- [AC_TRY_LINK([],
- [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
- DllMain (0, 0, 0);],
- [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
- case $host/$CC in
- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
- # old mingw systems require "-dll" to link a DLL, while more recent ones
- # require "-mdll"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -mdll"
- AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
- [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
- CFLAGS="$SAVE_CFLAGS" ;;
- *-*-cygwin* | *-*-pw32*)
- # cygwin systems need to pass --dll to the linker, and not link
- # crt.o which will require a WinMain@16 definition.
- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
- esac
;;
- ])
+])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
-case $enableval in
+case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
@@ -614,21 +500,21 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)d
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
-case $enableval in
+case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
@@ -647,8 +533,7 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)d
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
@@ -656,14 +541,14 @@ AC_ENABLE_STATIC(no)])
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
-case $enableval in
+case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
@@ -681,98 +566,12 @@ esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-# Where MODE is either `yes' or `no'. If omitted, it defaults to
-# `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])
-
-
# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
+AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
@@ -780,20 +579,16 @@ AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
# Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- re_direlt=['/[^/][^/]*/\.\./']
+changequote(,)dnl
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
@@ -815,17 +610,17 @@ elif test "$with_gnu_ld" = yes; then
else
AC_MSG_CHECKING([for non-GNU ld])
fi
-AC_CACHE_VAL(lt_cv_path_LD,
+AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
@@ -834,9 +629,9 @@ AC_CACHE_VAL(lt_cv_path_LD,
done
IFS="$ac_save_ifs"
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
-LD="$lt_cv_path_LD"
+LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
@@ -846,240 +641,56 @@ test -z "$LD" && AC_MSG_ERROR([no accept
AC_PROG_LD_GNU
])
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- lt_cv_prog_gnu_ld=yes
+ ac_cv_prog_gnu_ld=yes
else
- lt_cv_prog_gnu_ld=no
+ ac_cv_prog_gnu_ld=no
fi])
-with_gnu_ld=$lt_cv_prog_gnu_ld
])
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi4*)
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin* | mingw* |pw32*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
- rhapsody* | darwin1.[012])
- lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
- ;;
- *) # Darwin 1.3 on
- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
- ;;
- esac
- ;;
-
-freebsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20*|hpux11*)
- case $host_cpu in
- hppa*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- ia64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- esac
- ;;
-
-irix5* | irix6*)
- case $host_os in
- irix5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
- else
- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
- fi
- ;;
-
-newsos6)
- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
-[sysv5uw[78]* | sysv4*uw2*)]
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- motorola)
- lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
+AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(lt_cv_path_NM,
+AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- lt_cv_path_NM="$tmp_nm -B"
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- lt_cv_path_NM="$tmp_nm -p"
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
break
else
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
-NM="$lt_cv_path_NM"
+NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32*)
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
@@ -1093,39 +704,33 @@ esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments. Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
-# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+ case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!). If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'. Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
@@ -1136,8 +741,8 @@ AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+ INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
@@ -1145,91 +750,15 @@ AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
fi
])
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
- [],
- [define([AC_PROVIDE_IFELSE],
- [ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])])
-
-AC_DEFUN([_AC_LIBTOOL_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-
-AC_DEFUN([_AC_LIBTOOL_GCJ],
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
dnl old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
-
Index: configure
===================================================================
RCS file: /cvs/uberbaum/newlib/configure,v
retrieving revision 1.33
diff -d -u -p -r1.33 configure
--- configure 25 Jun 2004 20:32:31 -0000 1.33
+++ configure 27 Jun 2004 19:16:57 -0000
@@ -57,8 +57,6 @@ ac_help="$ac_help
ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
- --with-pic try to use only PIC/non-PIC objects [default=use both]"
-ac_help="$ac_help
--enable-newlib-hw-fp Turn on hardware floating point math"
# Initialize some variables set by options.
@@ -706,7 +704,7 @@ else
newlib_iconv_external_ccs=${newlib_iconv_external_ccs}
fi
-am__api_version="1.4"
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -719,7 +717,7 @@ am__api_version="1.4"
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:723: checking for a BSD compatible install" >&5
+echo "configure:721: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -772,7 +770,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCR
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:776: checking whether build environment is sane" >&5
+echo "configure:774: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
@@ -829,7 +827,7 @@ test "$program_suffix" != NONE &&
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:833: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:831: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -862,12 +860,12 @@ else
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:866: checking for Cygwin environment" >&5
+echo "configure:864: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 871 "configure"
+#line 869 "configure"
#include "confdefs.h"
int main() {
@@ -878,7 +876,7 @@ int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:882: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:880: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
@@ -895,19 +893,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:899: checking for mingw32 environment" >&5
+echo "configure:897: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 904 "configure"
+#line 902 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:911: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
@@ -1063,7 +1061,7 @@ else { echo "configure: error: can not r
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1067: checking host system type" >&5
+echo "configure:1065: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -1084,7 +1082,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1088: checking target system type" >&5
+echo "configure:1086: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -1102,7 +1100,7 @@ target_os=`echo $target | sed 's/^\([^-]
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1106: checking build system type" >&5
+echo "configure:1104: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -1144,21 +1142,21 @@ EOF
missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal-${am__api_version}""... $ac_c" 1>&6
-echo "configure:1149: checking for working aclocal-${am__api_version}" >&5
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:1147: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
-if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
- ACLOCAL=aclocal-${am__api_version}
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
echo "$ac_t""found" 1>&6
else
- ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
+ ACLOCAL="$missing_dir/missing aclocal"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1162: checking for working autoconf" >&5
+echo "configure:1160: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1170,21 +1168,21 @@ else
echo "$ac_t""missing" 1>&6
fi
-echo $ac_n "checking for working automake-${am__api_version}""... $ac_c" 1>&6
-echo "configure:1175: checking for working automake-${am__api_version}" >&5
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:1173: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
-if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
- AUTOMAKE=automake-${am__api_version}
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
echo "$ac_t""found" 1>&6
else
- AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
+ AUTOMAKE="$missing_dir/missing automake"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1188: checking for working autoheader" >&5
+echo "configure:1186: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1197,7 +1195,7 @@ else
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1201: checking for working makeinfo" >&5
+echo "configure:1199: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1222,7 +1220,7 @@ fi
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1226: checking for $ac_word" >&5
+echo "configure:1224: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1252,7 +1250,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1256: checking for $ac_word" >&5
+echo "configure:1254: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1301,7 +1299,7 @@ fi
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1305: checking whether we are using GNU C" >&5
+echo "configure:1303: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1310,7 +1308,7 @@ else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1312: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1325,7 +1323,7 @@ if test $ac_cv_prog_gcc = yes; then
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1329: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1327: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1356,7 +1354,7 @@ fi
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1360: checking for $ac_word" >&5
+echo "configure:1358: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1388,7 +1386,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1392: checking for $ac_word" >&5
+echo "configure:1390: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1420,7 +1418,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1424: checking for $ac_word" >&5
+echo "configure:1422: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1452,7 +1450,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1456: checking for $ac_word" >&5
+echo "configure:1454: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1497,7 +1495,7 @@ fi
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1501: checking for a BSD compatible install" >&5
+echo "configure:1499: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1551,7 +1549,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA=
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1555: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1553: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
@@ -1585,7 +1583,7 @@ if false; then
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1589: checking for executable suffix" >&5
+echo "configure:1587: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1595,7 +1593,7 @@ else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
@@ -1616,6 +1614,13 @@ echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT
fi
+# These get added in the top-level configure.in, except in the case where
+# newlib is being built natively.
+LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
+abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
+if test -z "${LIBC_INCLUDE_GREP}"; then
+ newlib_cflags="$newlib_cflags -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
+fi
. ${newlib_basedir}/configure.host
@@ -1695,6 +1700,8 @@ OBJEXT=${oext}
+CC_FOR_NEWLIB="${CC}"
+
if test "${use_libtool}" = "yes"; then
@@ -1702,7 +1709,7 @@ if test "${use_libtool}" = "yes"; then
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
-case $enableval in
+case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
@@ -1725,7 +1732,7 @@ fi
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
-case $enableval in
+case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
@@ -1748,7 +1755,7 @@ fi
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
-case $enableval in
+case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
@@ -1767,10 +1774,40 @@ else
enable_fast_install=yes
fi
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1781: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1774: checking for $ac_word" >&5
+echo "configure:1811: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1800,7 +1837,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1804: checking for $ac_word" >&5
+echo "configure:1841: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1851,7 +1888,7 @@ fi
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1855: checking for $ac_word" >&5
+echo "configure:1892: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1883,7 +1920,7 @@ fi
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1887: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1924: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1894,12 +1931,12 @@ cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
-#line 1898 "configure"
+#line 1935 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
@@ -1925,12 +1962,12 @@ if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1929: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1966: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1934: checking whether we are using GNU C" >&5
+echo "configure:1971: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1939,7 +1976,7 @@ else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1943: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1958,7 +1995,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1962: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1999: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1998,18 +2035,12 @@ else
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:2005: checking for ld used by GCC" >&5
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
+echo "configure:2042: checking for ld used by GCC" >&5
+ ac_prog=`($CC -print-prog-name=ld) 2>&5`
+ case "$ac_prog" in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
@@ -2031,12 +2062,12 @@ echo "configure:2005: checking for ld us
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:2035: checking for GNU ld" >&5
+echo "configure:2066: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:2038: checking for non-GNU ld" >&5
+echo "configure:2069: checking for non-GNU ld" >&5
fi
-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
@@ -2044,11 +2075,11 @@ else
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
@@ -2057,11 +2088,11 @@ else
done
IFS="$ac_save_ifs"
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD="$ac_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
@@ -2069,74 +2100,59 @@ else
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:2073: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+echo "configure:2104: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- lt_cv_prog_gnu_ld=yes
+ ac_cv_prog_gnu_ld=yes
else
- lt_cv_prog_gnu_ld=no
+ ac_cv_prog_gnu_ld=no
fi
fi
-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:2090: checking for $LD option to reload object files" >&5
-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
+echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:2102: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+echo "configure:2120: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- lt_cv_path_NM="$tmp_nm -B"
+ if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -B"
break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- lt_cv_path_NM="$tmp_nm -p"
+ elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ ac_cv_path_NM="$ac_dir/nm -p"
break
else
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi
fi
-NM="$lt_cv_path_NM"
+NM="$ac_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2140: checking whether ln -s works" >&5
+echo "configure:2156: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2156,482 +2172,19 @@ else
echo "$ac_t""no" 1>&6
fi
-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:2161: checking how to recognise dependant libraries" >&5
-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi4*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin* | mingw* |pw32*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- case "$host_os" in
- rhapsody* | darwin1.012)
- lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
- ;;
- *) # Darwin 1.3 on
- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
- ;;
- esac
- ;;
-
-freebsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20*|hpux11*)
- case $host_cpu in
- hppa*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- esac
- ;;
-
-irix5* | irix6*)
- case $host_os in
- irix5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
- fi
- ;;
-
-newsos6)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
-sysv5uw[78]* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case $host_vendor in
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-esac
-
-fi
-
-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-
-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2334: checking for object suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- rm -f conftest*
-echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2340: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- for ac_file in conftest.*; do
- case $ac_file in
- *.c) ;;
- *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
- esac
- done
-else
- { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_objext" 1>&6
-OBJEXT=$ac_cv_objext
-ac_objext=$ac_cv_objext
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2364: checking for ${ac_tool_prefix}file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="/usr/bin:$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- echo "$ac_t""$MAGIC_CMD" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2426: checking for file" >&5
-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case $MAGIC_CMD in
- /*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
- ?:/*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC_CMD="$MAGIC_CMD"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="/usr/bin:$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC_CMD="$ac_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- echo "$ac_t""$MAGIC_CMD" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- else
- MAGIC_CMD=:
- fi
-fi
-
- fi
- ;;
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
esac
-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2497: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_RANLIB"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2529: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- RANLIB=":"
-fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2564: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
- echo "$ac_t""$STRIP" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-if test -z "$ac_cv_prog_STRIP"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2596: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_STRIP="strip"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
-fi
-fi
-STRIP="$ac_cv_prog_STRIP"
-if test -n "$STRIP"; then
- echo "$ac_t""$STRIP" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-else
- STRIP=":"
-fi
-fi
-
-
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
libtool_flags="$libtool_flags --enable-win32-dll"
# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
@@ -2643,25 +2196,14 @@ fi
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-# Check whether --with-pic or --without-pic was given.
-if test "${with_pic+set}" = set; then
- withval="$with_pic"
- pic_mode="$withval"
-else
- pic_mode=default
-fi
-
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case $host in
+case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2663 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2664: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case `/usr/bin/file conftest.$ac_objext` in
+ echo '#line 2205 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2206: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
@@ -2676,48 +2218,24 @@ case $host in
rm -rf conftest*
;;
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { (eval echo configure:2683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2701: checking whether the C compiler needs -belf" >&5
+echo "configure:2227: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
- cat > conftest.$ac_ext <<EOF
-#line 2714 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 2232 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2721: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
@@ -2727,13 +2245,6 @@ else
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
- ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
@@ -2743,11 +2254,11 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
fi
;;
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+*-*-cygwin* | *-*-mingw*)
# Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
set dummy ${ac_tool_prefix}dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2751: checking for $ac_word" >&5
+echo "configure:2262: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2779,7 +2290,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2783: checking for $ac_word" >&5
+echo "configure:2294: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2814,7 +2325,7 @@ fi
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2818: checking for $ac_word" >&5
+echo "configure:2329: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2846,7 +2357,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2850: checking for $ac_word" >&5
+echo "configure:2361: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2881,7 +2392,7 @@ fi
# Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
set dummy ${ac_tool_prefix}objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2885: checking for $ac_word" >&5
+echo "configure:2396: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2913,7 +2424,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2917: checking for $ac_word" >&5
+echo "configure:2428: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2945,77 +2456,8 @@ else
fi
fi
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one
- echo $ac_n "checking if libtool should supply DllMain function""... $ac_c" 1>&6
-echo "configure:2953: checking if libtool should supply DllMain function" >&5
-if eval "test \"`echo '$''{'lt_cv_need_dllmain'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2958 "configure"
-#include "confdefs.h"
-
-int main() {
-extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
- DllMain (0, 0, 0);
-; return 0; }
-EOF
-if { (eval echo configure:2966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- lt_cv_need_dllmain=no
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- lt_cv_need_dllmain=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_need_dllmain" 1>&6
-
- case $host/$CC in
- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
- # old mingw systems require "-dll" to link a DLL, while more recent ones
- # require "-mdll"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -mdll"
- echo $ac_n "checking how to link DLLs""... $ac_c" 1>&6
-echo "configure:2987: checking how to link DLLs" >&5
-if eval "test \"`echo '$''{'lt_cv_cc_dll_switch'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2992 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:2999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- lt_cv_cc_dll_switch=-mdll
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- lt_cv_cc_dll_switch=-dll
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$lt_cv_cc_dll_switch" 1>&6
- CFLAGS="$SAVE_CFLAGS" ;;
- *-*-cygwin* | *-*-pw32*)
- # cygwin systems need to pass --dll to the linker, and not link
- # crt.o which will require a WinMain@16 definition.
- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
- esac
;;
-
+
esac
@@ -3069,14 +2511,12 @@ rm -f confcache
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
@@ -3090,7 +2530,7 @@ fi
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -3099,17 +2539,12 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtoo
# clobbered by the next message.
exec 5>>./config.log
-
-
-
-
-
for ac_prog in mawk gawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3113: checking for $ac_word" >&5
+echo "configure:2548: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -3189,17 +2624,6 @@ case $host in
esac
-# These get added in the top-level configure.in, except in the case where
-# newlib is being built natively.
-LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
-abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
-if test -z "${LIBC_INCLUDE_GREP}"; then
- CC_FOR_NEWLIB="${CC} -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
-else
- CC_FOR_NEWLIB="${CC}"
-fi
-
-
subdirs="${configdirs}"
@@ -3614,8 +3038,8 @@ s%@aext@%$aext%g
s%@libm_machine_dir@%$libm_machine_dir%g
s%@machine_dir@%$machine_dir%g
s%@sys_dir@%$sys_dir%g
+s%@CC_FOR_NEWLIB@%$CC_FOR_NEWLIB%g
s%@LN_S@%$LN_S%g
-s%@STRIP@%$STRIP%g
s%@DLLTOOL@%$DLLTOOL%g
s%@OBJDUMP@%$OBJDUMP%g
s%@LIBTOOL@%$LIBTOOL%g
@@ -3625,7 +3049,6 @@ s%@NEWLIB_HW_FP_FALSE@%$NEWLIB_HW_FP_FAL
s%@HAVE_DOC_TRUE@%$HAVE_DOC_TRUE%g
s%@HAVE_DOC_FALSE@%$HAVE_DOC_FALSE%g
s%@EXTRA_DIRS@%$EXTRA_DIRS%g
-s%@CC_FOR_NEWLIB@%$CC_FOR_NEWLIB%g
s%@subdirs@%$subdirs%g
s%@CRT0@%$CRT0%g
s%@CRT0_DIR@%$CRT0_DIR%g
Index: configure.host
===================================================================
RCS file: /cvs/uberbaum/newlib/configure.host,v
retrieving revision 1.60
diff -d -u -p -r1.60 configure.host
--- configure.host 9 Jun 2004 19:05:08 -0000 1.60
+++ configure.host 27 Jun 2004 19:16:57 -0000
@@ -43,7 +43,7 @@
# crt1 name of crt1 object if one is provided
# crt1_dir directory where crt1 object is found
-newlib_cflags=
+#newlib_cflags= # could already have stuff in it
libm_machine_dir=
machine_dir=
sys_dir=
@@ -445,7 +445,7 @@ case "${host}" in
default_newlib_io_long_long="yes"
default_newlib_io_long_double="yes"
default_newlib_io_pos_args="yes"
- newlib_cflags="${newlib_cflags} -DHAVE_OPENDIR -DHAVE_RENAME -DSIGNAL_PROVIDED -D_COMPILING_NEWLIB -DHAVE_FCNTL -DMALLOC_PROVIDED -I${cygwin_srcdir}/include"
+ newlib_cflags="-I${cygwin_srcdir}/include ${newlib_cflags} -DHAVE_OPENDIR -DHAVE_RENAME -DSIGNAL_PROVIDED -D_COMPILING_NEWLIB -DHAVE_FCNTL -DMALLOC_PROVIDED"
syscall_dir=syscalls
;;
# RTEMS supplies its own versions of some routines:
Index: configure.in
===================================================================
RCS file: /cvs/uberbaum/newlib/configure.in,v
retrieving revision 1.22
diff -d -u -p -r1.22 configure.in
--- configure.in 25 Jun 2004 20:32:31 -0000 1.22
+++ configure.in 27 Jun 2004 19:16:57 -0000
@@ -96,7 +96,10 @@ AC_ARG_ENABLE(newlib-iconv-external-ccs,
esac
fi], [newlib_iconv_external_ccs=${newlib_iconv_external_ccs}])dnl
+
NEWLIB_CONFIGURE(.)
+CC_FOR_NEWLIB="${CC}"
+AC_SUBST(CC_FOR_NEWLIB)
dnl We have to enable libtool after NEWLIB_CONFIGURE because if we try and
dnl add it into NEWLIB_CONFIGURE, executable tests are made before the first
@@ -135,17 +138,6 @@ case $host in
esac
AC_SUBST(EXTRA_DIRS)
-# These get added in the top-level configure.in, except in the case where
-# newlib is being built natively.
-LIBC_INCLUDE_GREP=`echo ${CC} | grep \/libc\/include`
-abs_newlib_basedir=`cd ${newlib_basedir} && pwd`
-if test -z "${LIBC_INCLUDE_GREP}"; then
- CC_FOR_NEWLIB="${CC} -I$PWD/targ-include -I${abs_newlib_basedir}/libc/include"
-else
- CC_FOR_NEWLIB="${CC}"
-fi
-AC_SUBST(CC_FOR_NEWLIB)
-
AC_CONFIG_SUBDIRS(${configdirs})
CRT0=