This is the mail archive of the newlib@sourceware.org mailing list for the newlib project.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
Hi I'm now back on building the gcc, but the problem is still the same. Building newlib failed. Now I used gcc 4.11 and binutils 2.17 and newlib 1.14 without any patch or change First I create for each module its own build folder Then I build the binutils everything works Then the gcc bootstrap And now I want to build newlib and the problem does still exist Attacted the newlib configure output and the make output Thanks! Jochen Gerster -----Original Message----- From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org] On Behalf Of Jeff Johnston Sent: Dienstag, 28. März 2006 22:01 To: Gerster Jochen-B01096 Cc: newlib@sources.redhat.com Subject: Re: newlib didn't create makefiles Jochen, Please post your directory setup (i.e. where is newlib, where are the rest of the tools). I would need to see your actual configuration command and the results. Are you configuring as "--target=powerpc-mpc55xx" or "--target=powerpc-eabispe"?? You must configure from the top-level (i.e. you don't configure inside the newlib subdirectory; the top-level src configuration does that for you when you finally issue "make all" or "make all-target-newlib"). -- Jeff J. Gerster Jochen-B01096 wrote: > I build the binutils and the gcc bootstrap using this manual > http://www.ifp.uiuc.edu/~nakazato/tips/xgcc.html > > > -----Original Message----- > From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org] > On Behalf Of Gerster Jochen-B01096 > Sent: Freitag, 24. März 2006 11:17 > To: newlib@sources.redhat.com > Subject: newlib didn't create makefiles > > Hi, > > I'm working on porting eCos to the powerpc mpc55xx family > > one step is building a gcc. And that's where the trouble getting > started > > USING: > binutils 2.15 < patch_e200z6_binutils-2.15.diff > gcc-3.4.3 < patch_all_e200_gcc-3.4.3.diff > newlib 1.12.0 > > TARGET: powerpc mpc55xx > HOST: i686-pc-cygwin > BUILD: i686-pc-cygwin > > Building binutils 2.15 - works > Building gcc 3.4.3 bootstrap - works > now I want to build newlib and ... > > make[4]: Entering directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib' > make[4]: *** No rule to make target `all'. Stop. > make[4]: Leaving directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib' > make[3]: *** [multi-do] Error 1 > make[3]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib' > make[2]: *** [all-multi] Error 2 > make[2]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib' > make[1]: *** [all-recursive-am] Error 2 > make[1]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib' > make: *** [all-target-newlib] Error 2 > > the directory mpc7400/newlib is completely empty, no makefile, nothing > > Any ideas??? > > I also tested newlib 1.13.0 newlib 1.14.0 -> same results > > Thank you for your help! > > Jochen
Attachment:
newlib_out_make.txt
Description: Text document
Attachment:
newlib_out_cfg.txt
Description: Text document
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |