-----Original Message-----
From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org] On Behalf Of Jeff Johnston
Sent: Dienstag, 28. März 2006 22:01
To: Gerster Jochen-B01096
Cc: newlib@sources.redhat.com
Subject: Re: newlib didn't create makefiles
Jochen,
Please post your directory setup (i.e. where is newlib, where are the rest of the tools). I would need to see your actual configuration command and the results. Are you configuring as "--target=powerpc-mpc55xx" or "--target=powerpc-eabispe"?? You must configure from the top-level (i.e. you don't configure inside the newlib subdirectory; the top-level src configuration does that for you when you finally issue "make all" or "make all-target-newlib").
-- Jeff J.
Gerster Jochen-B01096 wrote:
I build the binutils and the gcc bootstrap using this manual
http://www.ifp.uiuc.edu/~nakazato/tips/xgcc.html
-----Original Message-----
From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org]
On Behalf Of Gerster Jochen-B01096
Sent: Freitag, 24. März 2006 11:17
To: newlib@sources.redhat.com
Subject: newlib didn't create makefiles
Hi,
I'm working on porting eCos to the powerpc mpc55xx family
one step is building a gcc. And that's where the trouble getting
started
USING:
binutils 2.15 < patch_e200z6_binutils-2.15.diff
gcc-3.4.3 < patch_all_e200_gcc-3.4.3.diff
newlib 1.12.0
TARGET: powerpc mpc55xx
HOST: i686-pc-cygwin
BUILD: i686-pc-cygwin
Building binutils 2.15 - works
Building gcc 3.4.3 bootstrap - works
now I want to build newlib and ...
make[4]: Entering directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib'
make[4]: *** No rule to make target `all'. Stop.
make[4]: Leaving directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib'
make[3]: *** [multi-do] Error 1
make[3]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
make[2]: *** [all-multi] Error 2
make[2]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
make[1]: *** [all-recursive-am] Error 2
make[1]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
make: *** [all-target-newlib] Error 2
the directory mpc7400/newlib is completely empty, no makefile, nothing
Any ideas???
I also tested newlib 1.13.0 newlib 1.14.0 -> same results
Thank you for your help!
Jochen
------------------------------------------------------------------------
b01096@B01096-11 /src/build_newlib
$ make all
make[1]: Entering directory `/src/build_newlib'
mkdir -p -- ./etc
Configuring in ./etc
creating cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
updating cache ./config.cache
creating ./config.status
creating Makefile
make[2]: Entering directory `/src/build_newlib/etc'
for f in standards.info configure.info; do \
if test -f ../../newlib-1.14.0/etc/`echo $f | sed -e 's/.info$/.texi/'
`; then \
if make "MAKEINFO=makeinfo --split-size=5000000 --split-size=5000000
" $f; then \
true; \
else \
exit 1; \
fi; \
fi; \
done
make[3]: Entering directory `/src/build_newlib/etc'
makeinfo --split-size=5000000 --split-size=5000000 --no-split -I../../newlib-1.1
4.0/etc -o standards.info ../../newlib-1.14.0/etc/standards.texi
../../newlib-1.14.0/etc/standards.texi:1743: warning: @strong{Note...} produces
a spurious cross-reference in Info; reword to avoid that.
../../newlib-1.14.0/etc/standards.texi:1858: warning: @strong{Note...} produces
a spurious cross-reference in Info; reword to avoid that.
make[3]: Leaving directory `/src/build_newlib/etc'
make[3]: Entering directory `/src/build_newlib/etc'
rm -f configdev.txt configbuild.txt
cp ../../newlib-1.14.0/etc/configdev.tin configdev.txt
cp ../../newlib-1.14.0/etc/configbuild.tin configbuild.txt
makeinfo --split-size=5000000 --split-size=5000000 -I../../newlib-1.14.0/etc -o
configure.info ../../newlib-1.14.0/etc/configure.texi
rm -f configdev.txt configbuild.txt
make[3]: Leaving directory `/src/build_newlib/etc'
make[2]: Leaving directory `/src/build_newlib/etc'
Checking multilib configuration for newlib...
mkdir -p -- powerpc-eabi/newlib
Configuring in powerpc-eabi/newlib
creating cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for Cygwin environment... no
checking for mingw32 environment... no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -i
system /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1
.14.0/newlib/libc/include
checking whether we are using GNU C... yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... yes
checking for -as... powerpc-eabi-as
checking for -ar... powerpc-eabi-ar
checking for -ranlib... powerpc-eabi-ranlib
checking for a BSD compatible install... /usr/bin/install -c
checking whether to enable maintainer-specific portions of Makefiles... no
checking for .preinit_array/.init_array/.fini_array support... yes
checking for array aliasing support... no
updating cache ./config.cache
creating ./config.status
creating Makefile
creating newlib.h
Adding multilib support to Makefile in ../../../newlib-1.14.0/newlib
multidirs=nof/ le/ und/ le/und/ nof/le/ nof/und/ nof/le/und/
with_multisubdir=
Running configure in multilib subdirs nof/ le/ und/ le/und/ nof/le/ nof/und/ nof
/le/und/
pwd: /src/build_newlib/powerpc-eabi/newlib
Running configure in multilib subdir nof/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof
Running configure in multilib subdir le/
pwd: /src/build_newlib/powerpc-eabi
mkdir le
Running configure in multilib subdir und/
pwd: /src/build_newlib/powerpc-eabi
mkdir und
Running configure in multilib subdir le/und/
pwd: /src/build_newlib/powerpc-eabi
mkdir le/und
Running configure in multilib subdir nof/le/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof/le
Running configure in multilib subdir nof/und/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof/und
Running configure in multilib subdir nof/le/und/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof/le/und
configuring in libc
running /bin/sh ../../../../newlib-1.14.0/newlib/libc/configure --build=i686-pc
-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-multili
b --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--program-t
ransform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-fi
le=.././config.cache --srcdir=../../../../newlib-1.14.0/newlib/libc
loading cache .././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
creating argz/Makefile
creating ctype/Makefile
creating errno/Makefile
creating locale/Makefile
creating misc/Makefile
creating reent/Makefile
creating search/Makefile
creating stdio/Makefile
creating stdio64/Makefile
creating stdlib/Makefile
creating string/Makefile
creating time/Makefile
creating posix/Makefile
creating signal/Makefile
creating syscalls/Makefile
creating unix/Makefile
creating iconv/Makefile
creating iconv/ces/Makefile
creating iconv/ccs/Makefile
creating iconv/ccs/binary/Makefile
creating iconv/lib/Makefile
configuring in machine
running /bin/sh ../../../../../newlib-1.14.0/newlib/libc/machine/configure --bu
ild=i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --ena
ble-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '
--program-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi
--cache-file=../.././config.cache --srcdir=../../../../../newlib-1.14.0/newlib/
libc/machine
loading cache ../.././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
configuring in powerpc
running /bin/sh ../../../../../../newlib-1.14.0/newlib/libc/machine/powerpc/conf
igure --build=i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-n
ewlib --enable-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/pow
erpc-eabi '--program-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=p
owerpc-eabi --cache-file=../../.././config.cache --srcdir=../../../../../../newl
ib-1.14.0/newlib/libc/machine/powerpc
loading cache ../../.././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
configuring in sys
running /bin/sh ../../../../../newlib-1.14.0/newlib/libc/sys/configure --build=
i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-
multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--pr
ogram-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --c
ache-file=../.././config.cache --srcdir=../../../../../newlib-1.14.0/newlib/libc
/sys
loading cache ../.././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
configuring in libm
running /bin/sh ../../../../newlib-1.14.0/newlib/libm/configure --build=i686-pc
-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-multili
b --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--program-t
ransform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-fi
le=.././config.cache --srcdir=../../../../newlib-1.14.0/newlib/libm
loading cache .././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
creating math/Makefile
creating mathfp/Makefile
creating common/Makefile
configuring in machine
running /bin/sh ../../../../../newlib-1.14.0/newlib/libm/machine/configure --bu
ild=i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --ena
ble-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '
--program-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi
--cache-file=../.././config.cache --srcdir=../../../../../newlib-1.14.0/newlib/
libm/machine
loading cache ../.././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
creating ./config.status
creating Makefile
configuring in doc
running /bin/sh ../../../../newlib-1.14.0/newlib/doc/configure --build=i686-pc-
cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-multilib
--with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--program-tr
ansform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-fil
e=.././config.cache --srcdir=../../../../newlib-1.14.0/newlib/doc
loading cache .././config.cache
checking for a BSD compatible install... ../
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... (cached) yes
checking for Cygwin environment... (cached) no
checking for mingw32 environment... (cached) no
checking host system type... powerpc-unknown-eabi
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for working aclocal-1.4... missing
checking for working autoconf... missing
checking for working automake-1.4... missing
checking for working autoheader... missing
checking for working makeinfo... found
checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src
/newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes
checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys
tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14
.0/newlib/libc/include accepts -g... (cached) yes
checking for -as... (cached) powerpc-eabi-as
checking for -ar... (cached) powerpc-eabi-ar
checking for -ranlib... (cached) powerpc-eabi-ranlib
checking for a BSD compatible install... ../
checking whether to enable maintainer-specific portions of Makefiles... no
checking for build system executable suffix... no
updating cache .././config.cache
creating ./config.status
creating Makefile
make[2]: Entering directory `/src/build_newlib/powerpc-eabi/newlib'
make "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-O2 -g -O2 " "CFLAGS_
FOR_BUILD=-g -O2 " "CFLAGS_FOR_TARGET=-O2 -g -O2 " "LDFLAGS=" "LIBC
FLAGS=-O2 -g -O2 " "LIBCFLAGS_FOR_TARGET=-O2 -g -O2 " "MAKE=make" "MAK
EINFO=makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICF
LAG_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect" "RUNTEST
=runtest" "RUNTESTFLAGS=" "exec_prefix=/usr/local/powerpc-eabi" "i
nfodir=/usr/local/powerpc-eabi/info" "libdir=/usr/local/powerpc-eabi/lib" "pr
efix=/usr/local/powerpc-eabi" "tooldir=/usr/local/powerpc-eabi/powerpc-eabi" "
top_toollibdir=/usr/local/powerpc-eabi/powerpc-eabi/lib" "AR=powerpc-eabi
-ar" "AS=powerpc-eabi-as" "CC=powerpc-eabi-gcc -B/src/build_newlib/powerpc
-eabi/newlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isyst
em /src/newlib-1.14.0/newlib/libc/include" "LD=powerpc-eabi-ld" "LIBCFLA
GS=-O2 -g -O2 " "NM=powerpc-eabi-nm" "PICFLAG=" "RANLIB=powerpc-
eabi-ranlib" "DESTDIR=" all-recursive
make[3]: Entering directory `/src/build_newlib/powerpc-eabi/newlib'
make "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-O2 -g -O2 " "CFLAGS_
FOR_BUILD=-g -O2 " "CFLAGS_FOR_TARGET=-O2 -g -O2 " "LDFLAGS=" "LIBC
FLAGS=-O2 -g -O2 " "LIBCFLAGS_FOR_TARGET=-O2 -g -O2 " "MAKE=make" "MAK
EINFO=makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICF
LAG_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect" "RUNTEST
=runtest" "RUNTESTFLAGS=" "exec_prefix=/usr/local/powerpc-eabi" "i
nfodir=/usr/local/powerpc-eabi/info" "libdir=/usr/local/powerpc-eabi/lib" "pr
efix=/usr/local/powerpc-eabi" "tooldir=/usr/local/powerpc-eabi/powerpc-eabi" "
top_toollibdir=/usr/local/powerpc-eabi/powerpc-eabi/lib" "AR=powerpc-eabi
-ar" "AS=powerpc-eabi-as" "CC=powerpc-eabi-gcc -B/src/build_newlib/powerpc
-eabi/newlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isyst
em /src/newlib-1.14.0/newlib/libc/include" "LD=powerpc-eabi-ld" "LIBCFLA
GS=-O2 -g -O2 " "NM=powerpc-eabi-nm" "PICFLAG=" "RANLIB=powerpc-
eabi-ranlib" "DESTDIR=" DO=all multi-do # make
make[4]: Entering directory `/src/build_newlib/powerpc-eabi/newlib'
if [ -z "nof/ le/ und/ le/und/ nof/le/ nof/und/ nof/le/und/" ]; then \
true; \
else \
rootpre=`${PWDCMD-pwd}`/; export rootpre; \
srcrootpre=`cd ../../../newlib-1.14.0/newlib; ${PWDCMD-pwd}`/; export
srcrootpre; \
lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
compiler="powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -i
system /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1
.14.0/newlib/libc/include"; \
for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $i | sed -e 's/;.*$//'`; \
if [ "${dir}" = "." ]; then \
true; \
else \
if [ -d ../${dir}/${lib} ]; then \
flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../${dir}/${lib}; make "AR_FLAGS=rc" "CC_FOR_BUILD=gc
c" "CFLAGS=-O2 -g -O2 " "CFLAGS_FOR_BUILD=-g -O2 " "CFLAGS_FOR_TARG
ET=-O2 -g -O2 " "LDFLAGS=" "LIBCFLAGS=-O2 -g -O2 " "LIBCFLA
GS_FOR_TARGET=-O2 -g -O2 " "MAKE=make" "MAKEINFO=makeinfo --split-size=
5000000 --split-size=5000000 " "PICFLAG=" "PICFLAG_FOR_TARGET=" "S
HELL=/bin/sh" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS="
"exec_prefix=/usr/local/powerpc-eabi" "infodir=/usr/local/powerpc-eabi
/info" "libdir=/usr/local/powerpc-eabi/lib" "prefix=/usr/local/powerpc-eabi"
"tooldir=/usr/local/powerpc-eabi/powerpc-eabi" "top_toollibdir=/usr/loc
al/powerpc-eabi/powerpc-eabi/lib" "AR=powerpc-eabi-ar" "AS=powerpc-eabi
-as" "CC=powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isystem /
src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14.0/ne
wlib/libc/include" "LD=powerpc-eabi-ld" "LIBCFLAGS=-O2 -g -O2 " "NM=pow
erpc-eabi-nm" "PICFLAG=" "RANLIB=powerpc-eabi-ranlib" "DESTDIR=" \
CFLAGS="-O2 -g -O2 ${flags}" \
FCFLAGS=" ${flags}" \
FFLAGS=" ${flags}" \
ADAFLAGS=" ${flags}" \
prefix="/usr/local/powerpc-eabi" \
exec_prefix="/usr/local/powerpc-eabi" \
GCJFLAGS="@GCJFLAGS@ ${flags}" \
CXXFLAGS="-g -O2 ${flags}" \
LIBCFLAGS="-O2 -g -O2 ${flags}" \
LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${f
lags}" \
LDFLAGS=" ${flags}" \
MULTIFLAGS="${flags}" \
DESTDIR="" \
INSTALL="/usr/bin/install -c" \
INSTALL_DATA="/usr/bin/install -c -m 644" \
INSTALL_PROGRAM="/usr/bin/install -c " \
INSTALL_SCRIPT="/usr/bin/install -c" \
all); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
make[5]: Entering directory `/src/build_newlib/powerpc-eabi/nof/newlib'
make[5]: *** No rule to make target `all'. Stop.
make[5]: Leaving directory `/src/build_newlib/powerpc-eabi/nof/newlib'
make[4]: *** [multi-do] Error 1
make[4]: Leaving directory `/src/build_newlib/powerpc-eabi/newlib'
make[3]: *** [all-multi] Error 2
make[3]: Leaving directory `/src/build_newlib/powerpc-eabi/newlib'
make[2]: *** [all-recursive-am] Error 2
make[2]: Leaving directory `/src/build_newlib/powerpc-eabi/newlib'
make[1]: *** [all-target-newlib] Error 2
make[1]: Leaving directory `/src/build_newlib'
make: *** [all] Error 2
b01096@B01096-11 /src/build_newlib
$
------------------------------------------------------------------------
b01096@B01096-11 /src/build_newlib
$ ../newlib-1.14.0/configure --target=powerpc-eabi --prefix=/usr/local/powerpc-
eabi
creating cache ./config.cache
checking host system type... i686-pc-cygwin
checking target system type... powerpc-unknown-eabi
checking build system type... i686-pc-cygwin
checking for a BSD compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for gnatbind... no
checking whether compiler driver understands Ada... no
checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f
2
checking for correct version of gmp.h... no
checking for bison... bison -y
checking for bison... bison
checking for gm4... no
checking for gnum4... no
checking for m4... m4
checking for flex... flex
checking for flex... flex
checking for makeinfo... makeinfo
checking for expect... no
checking for runtest... no
checking for i686-pc-cygwin-ar... no
checking for ar... ar
checking for i686-pc-cygwin-as... no
checking for as... as
checking for i686-pc-cygwin-dlltool... no
checking for dlltool... dlltool
checking for i686-pc-cygwin-ld... /usr/lib/gcc/i686-pc-cygwin/3.4.4/../../../../
i686-pc-cygwin/bin/ld.exe
checking for i686-pc-cygwin-lipo... no
checking for lipo... no
checking for i686-pc-cygwin-nm... no
checking for nm... nm
checking for i686-pc-cygwin-ranlib... no
checking for ranlib... ranlib
checking for i686-pc-cygwin-strip... no
checking for strip... strip
checking for i686-pc-cygwin-windres... no
checking for windres... windres
checking for i686-pc-cygwin-objcopy... no
checking for objcopy... objcopy
checking for i686-pc-cygwin-objdump... no
checking for objdump... objdump
checking for powerpc-eabi-ar... powerpc-eabi-ar
checking for powerpc-eabi-as... powerpc-eabi-as
checking for powerpc-eabi-cc... no
checking for powerpc-eabi-gcc... powerpc-eabi-gcc
checking for powerpc-eabi-c++... powerpc-eabi-c++
checking for powerpc-eabi-dlltool... no
checking for powerpc-eabi-gcc... powerpc-eabi-gcc
checking for powerpc-eabi-gcj... powerpc-eabi-gcj
checking for powerpc-eabi-gfortran... no
checking for powerpc-eabi-ld... powerpc-eabi-ld
checking for powerpc-eabi-lipo... no
checking for powerpc-eabi-nm... powerpc-eabi-nm
checking for powerpc-eabi-objdump... powerpc-eabi-objdump
checking for powerpc-eabi-ranlib... powerpc-eabi-ranlib
checking for powerpc-eabi-strip... powerpc-eabi-strip
checking for powerpc-eabi-windres... no
checking where to find the target ar... pre-installed
checking where to find the target as... pre-installed
checking where to find the target cc... pre-installed
checking where to find the target c++... pre-installed
checking where to find the target c++ for libstdc++... pre-installed
checking where to find the target dlltool... pre-installed
checking where to find the target gcc... pre-installed
checking where to find the target gcj... pre-installed
checking where to find the target gfortran... pre-installed
checking where to find the target ld... pre-installed
checking where to find the target lipo... pre-installed
checking where to find the target nm... pre-installed
checking where to find the target objdump... pre-installed
checking where to find the target ranlib... pre-installed
checking where to find the target strip... pre-installed
checking where to find the target windres... pre-installed
checking whether to enable maintainer-specific portions of Makefiles... no
checking if symbolic links between directories work... yes
updating cache ./config.cache
creating ./config.status
creating Makefile