This is the mail archive of the newlib@sourceware.org mailing list for the newlib project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: newlib didn't create makefiles


Gerster Jochen-B01096 wrote:
Hi Jeff,
The problem is there is no makefile, so I should download the current sources and try it again?


Yes. Start from scratch (i.e. delete your build directory first). If you again have problems, send me the configuration and build results.


-- Jeff J.

Thank you for your help!

Jochen

-----Original Message-----
From: Jeff Johnston [mailto:jjohnstn@redhat.com] Sent: Freitag, 14. Juli 2006 20:58
To: Gerster Jochen-B01096
Cc: newlib@sources.redhat.com
Subject: Re: newlib didn't create makefiles


Gerster Jochen-B01096 wrote:


Hi


I'm now back on building the gcc, but the problem is still the same. Building newlib failed.
Now I used gcc 4.11 and binutils 2.17 and newlib 1.14 without any patch or change


First I create for each module its own build folder Then I build the binutils everything works Then the gcc bootstrap And now I want to build newlib and the problem does still exist

Attacted the newlib configure output and the make output

Thanks!

Jochen Gerster



Jochen,

I'm not seeing anything obvious:

Can you append /src/build_newlib/powerpc-eabi/nof/newlib/Makefile?

Have you tried the most current CVS sources to see if a problem has been fixed? A lot has been done with configuration after 1.14 was created.

-- Jeff J.




-----Original Message-----
From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org] On Behalf Of Jeff Johnston
Sent: Dienstag, 28. März 2006 22:01
To: Gerster Jochen-B01096
Cc: newlib@sources.redhat.com
Subject: Re: newlib didn't create makefiles


Jochen,

Please post your directory setup (i.e. where is newlib, where are the rest of the tools). I would need to see your actual configuration command and the results. Are you configuring as "--target=powerpc-mpc55xx" or "--target=powerpc-eabispe"?? You must configure from the top-level (i.e. you don't configure inside the newlib subdirectory; the top-level src configuration does that for you when you finally issue "make all" or "make all-target-newlib").

-- Jeff J.

Gerster Jochen-B01096 wrote:


I build the binutils and the gcc bootstrap using this manual http://www.ifp.uiuc.edu/~nakazato/tips/xgcc.html


-----Original Message----- From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org] On Behalf Of Gerster Jochen-B01096 Sent: Freitag, 24. März 2006 11:17 To: newlib@sources.redhat.com Subject: newlib didn't create makefiles

Hi,

I'm working on porting eCos to the powerpc mpc55xx family

one step is building a gcc. And that's where the trouble getting started

USING:
binutils 2.15  < patch_e200z6_binutils-2.15.diff
gcc-3.4.3      < patch_all_e200_gcc-3.4.3.diff
newlib 1.12.0

TARGET: powerpc mpc55xx
HOST: i686-pc-cygwin
BUILD: i686-pc-cygwin

Building binutils 2.15                - works
Building gcc 3.4.3 bootstrap     - works
now I want to build newlib and ...

make[4]: Entering directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib'
make[4]: *** No rule to make target `all'. Stop.
make[4]: Leaving directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib'
make[3]: *** [multi-do] Error 1
make[3]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
make[2]: *** [all-multi] Error 2
make[2]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
make[1]: *** [all-recursive-am] Error 2
make[1]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
make: *** [all-target-newlib] Error 2

the directory mpc7400/newlib is completely empty, no makefile, nothing

Any ideas???

I also tested newlib 1.13.0 newlib 1.14.0 -> same results

Thank you for your help!

Jochen



---------------------------------------------------------------------- --

b01096@B01096-11 /src/build_newlib
$ make all
make[1]: Entering directory `/src/build_newlib'
mkdir -p -- ./etc
Configuring in ./etc
creating cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c updating cache ./config.cache creating ./config.status creating Makefile
make[2]: Entering directory `/src/build_newlib/etc'
for f in standards.info configure.info; do \
if test -f ../../newlib-1.14.0/etc/`echo $f | sed -e 's/.info$/.texi/'
`; then \
if make "MAKEINFO=makeinfo --split-size=5000000 --split-size=5000000 " $f; then \
true; \
else \
exit 1; \
fi; \
fi; \
done
make[3]: Entering directory `/src/build_newlib/etc'
makeinfo --split-size=5000000 --split-size=5000000 --no-split -I../../newlib-1.1 4.0/etc -o standards.info ../../newlib-1.14.0/etc/standards.texi
../../newlib-1.14.0/etc/standards.texi:1743: warning: @strong{Note...} produces a spurious cross-reference in Info; reword to avoid that.
../../newlib-1.14.0/etc/standards.texi:1858: warning: @strong{Note...} produces a spurious cross-reference in Info; reword to avoid that.
make[3]: Leaving directory `/src/build_newlib/etc'
make[3]: Entering directory `/src/build_newlib/etc'
rm -f configdev.txt configbuild.txt
cp ../../newlib-1.14.0/etc/configdev.tin configdev.txt cp ../../newlib-1.14.0/etc/configbuild.tin configbuild.txt makeinfo --split-size=5000000 --split-size=5000000 -I../../newlib-1.14.0/etc -o configure.info ../../newlib-1.14.0/etc/configure.texi
rm -f configdev.txt configbuild.txt
make[3]: Leaving directory `/src/build_newlib/etc'
make[2]: Leaving directory `/src/build_newlib/etc'
Checking multilib configuration for newlib...
mkdir -p -- powerpc-eabi/newlib
Configuring in powerpc-eabi/newlib
creating cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking whether make sets ${MAKE}... yes checking for Cygwin environment... no checking for mingw32 environment... no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -i system /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1 .14.0/newlib/libc/include checking whether we are using GNU C... yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... yes checking for -as... powerpc-eabi-as checking for -ar... powerpc-eabi-ar checking for -ranlib... powerpc-eabi-ranlib checking for a BSD compatible install... /usr/bin/install -c checking whether to enable maintainer-specific portions of Makefiles... no checking for .preinit_array/.init_array/.fini_array support... yes checking for array aliasing support... no updating cache ./config.cache creating ./config.status creating Makefile creating newlib.h Adding multilib support to Makefile in ../../../newlib-1.14.0/newlib multidirs=nof/ le/ und/ le/und/ nof/le/ nof/und/ nof/le/und/ with_multisubdir= Running configure in multilib subdirs nof/ le/ und/ le/und/ nof/le/ nof/und/ nof /le/und/
pwd: /src/build_newlib/powerpc-eabi/newlib
Running configure in multilib subdir nof/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof
Running configure in multilib subdir le/
pwd: /src/build_newlib/powerpc-eabi
mkdir le
Running configure in multilib subdir und/
pwd: /src/build_newlib/powerpc-eabi
mkdir und
Running configure in multilib subdir le/und/
pwd: /src/build_newlib/powerpc-eabi
mkdir le/und
Running configure in multilib subdir nof/le/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof/le
Running configure in multilib subdir nof/und/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof/und
Running configure in multilib subdir nof/le/und/
pwd: /src/build_newlib/powerpc-eabi
mkdir nof/le/und
configuring in libc
running /bin/sh ../../../../newlib-1.14.0/newlib/libc/configure --build=i686-pc -cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-multili b --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--program-t ransform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-fi le=.././config.cache --srcdir=../../../../newlib-1.14.0/newlib/libc
loading cache .././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no creating ./config.status creating Makefile creating argz/Makefile creating ctype/Makefile creating errno/Makefile creating locale/Makefile creating misc/Makefile creating reent/Makefile creating search/Makefile creating stdio/Makefile creating stdio64/Makefile creating stdlib/Makefile creating string/Makefile creating time/Makefile creating posix/Makefile creating signal/Makefile creating syscalls/Makefile creating unix/Makefile creating iconv/Makefile creating iconv/ces/Makefile creating iconv/ccs/Makefile creating iconv/ccs/binary/Makefile creating iconv/lib/Makefile configuring in machine running /bin/sh ../../../../../newlib-1.14.0/newlib/libc/machine/configure --bu ild=i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --ena ble-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '
--program-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-file=../.././config.cache --srcdir=../../../../../newlib-1.14.0/newlib/
libc/machine
loading cache ../.././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no creating ./config.status creating Makefile configuring in powerpc running /bin/sh ../../../../../../newlib-1.14.0/newlib/libc/machine/powerpc/conf
igure --build=i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-n ewlib --enable-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/pow erpc-eabi '--program-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=p owerpc-eabi --cache-file=../../.././config.cache --srcdir=../../../../../../newl ib-1.14.0/newlib/libc/machine/powerpc
loading cache ../../.././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no creating ./config.status creating Makefile configuring in sys running /bin/sh ../../../../../newlib-1.14.0/newlib/libc/sys/configure --build= i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable- multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--pr ogram-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --c ache-file=../.././config.cache --srcdir=../../../../../newlib-1.14.0/newlib/libc
/sys
loading cache ../.././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no creating ./config.status creating Makefile configuring in libm running /bin/sh ../../../../newlib-1.14.0/newlib/libm/configure --build=i686-pc -cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-multili b --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--program-t ransform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-fi le=.././config.cache --srcdir=../../../../newlib-1.14.0/newlib/libm
loading cache .././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no creating ./config.status creating Makefile creating math/Makefile creating mathfp/Makefile creating common/Makefile configuring in machine running /bin/sh ../../../../../newlib-1.14.0/newlib/libm/machine/configure --bu ild=i686-pc-cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --ena ble-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '
--program-transform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-file=../.././config.cache --srcdir=../../../../../newlib-1.14.0/newlib/
libm/machine
loading cache ../.././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no creating ./config.status creating Makefile configuring in doc running /bin/sh ../../../../newlib-1.14.0/newlib/doc/configure --build=i686-pc- cygwin --host=powerpc-eabi --target=powerpc-eabi --with-newlib --enable-multilib --with-cross-host=i686-pc-cygwin --prefix=/usr/local/powerpc-eabi '--program-tr ansform-name=s,^,powerpc-eabi-,; ' --with-target-subdir=powerpc-eabi --cache-fil e=.././config.cache --srcdir=../../../../newlib-1.14.0/newlib/doc
loading cache .././config.cache
checking for a BSD compatible install... ../ checking whether build environment is sane... yes checking whether make sets ${MAKE}... (cached) yes checking for Cygwin environment... (cached) no checking for mingw32 environment... (cached) no checking host system type... powerpc-unknown-eabi checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for working aclocal-1.4... missing checking for working autoconf... missing checking for working automake-1.4... missing checking for working autoheader... missing checking for working makeinfo... found checking for gcc... (cached) powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/n
ewlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src /newlib-1.14.0/newlib/libc/include
checking whether we are using GNU C... (cached) yes checking whether powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isys tem /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14 .0/newlib/libc/include accepts -g... (cached) yes checking for -as... (cached) powerpc-eabi-as checking for -ar... (cached) powerpc-eabi-ar checking for -ranlib... (cached) powerpc-eabi-ranlib checking for a BSD compatible install... ../ checking whether to enable maintainer-specific portions of Makefiles... no checking for build system executable suffix... no updating cache .././config.cache creating ./config.status creating Makefile
make[2]: Entering directory `/src/build_newlib/powerpc-eabi/newlib'
make "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-O2 -g -O2 " "CFLAGS_
FOR_BUILD=-g -O2 " "CFLAGS_FOR_TARGET=-O2 -g -O2 " "LDFLAGS=" "LIBC
FLAGS=-O2 -g -O2 " "LIBCFLAGS_FOR_TARGET=-O2 -g -O2 " "MAKE=make" "MAK
EINFO=makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICF
LAG_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect" "RUNTEST
=runtest" "RUNTESTFLAGS=" "exec_prefix=/usr/local/powerpc-eabi" "i
nfodir=/usr/local/powerpc-eabi/info" "libdir=/usr/local/powerpc-eabi/lib" "pr
efix=/usr/local/powerpc-eabi" "tooldir=/usr/local/powerpc-eabi/powerpc-eabi" "
top_toollibdir=/usr/local/powerpc-eabi/powerpc-eabi/lib" "AR=powerpc-eabi
-ar" "AS=powerpc-eabi-as" "CC=powerpc-eabi-gcc -B/src/build_newlib/powerpc
-eabi/newlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isyst
em /src/newlib-1.14.0/newlib/libc/include" "LD=powerpc-eabi-ld" "LIBCFLA
GS=-O2 -g -O2 " "NM=powerpc-eabi-nm" "PICFLAG=" "RANLIB=powerpc-
eabi-ranlib" "DESTDIR=" all-recursive
make[3]: Entering directory `/src/build_newlib/powerpc-eabi/newlib'
make "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-O2 -g -O2 " "CFLAGS_
FOR_BUILD=-g -O2 " "CFLAGS_FOR_TARGET=-O2 -g -O2 " "LDFLAGS=" "LIBC
FLAGS=-O2 -g -O2 " "LIBCFLAGS_FOR_TARGET=-O2 -g -O2 " "MAKE=make" "MAK
EINFO=makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICF
LAG_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect" "RUNTEST
=runtest" "RUNTESTFLAGS=" "exec_prefix=/usr/local/powerpc-eabi" "i
nfodir=/usr/local/powerpc-eabi/info" "libdir=/usr/local/powerpc-eabi/lib" "pr
efix=/usr/local/powerpc-eabi" "tooldir=/usr/local/powerpc-eabi/powerpc-eabi" "
top_toollibdir=/usr/local/powerpc-eabi/powerpc-eabi/lib" "AR=powerpc-eabi
-ar" "AS=powerpc-eabi-as" "CC=powerpc-eabi-gcc -B/src/build_newlib/powerpc
-eabi/newlib/ -isystem /src/build_newlib/powerpc-eabi/newlib/targ-include -isyst
em /src/newlib-1.14.0/newlib/libc/include" "LD=powerpc-eabi-ld" "LIBCFLA
GS=-O2 -g -O2 " "NM=powerpc-eabi-nm" "PICFLAG=" "RANLIB=powerpc-
eabi-ranlib" "DESTDIR=" DO=all multi-do # make
make[4]: Entering directory `/src/build_newlib/powerpc-eabi/newlib'
if [ -z "nof/ le/ und/ le/und/ nof/le/ nof/und/ nof/le/und/" ]; then \
true; \
else \
rootpre=`${PWDCMD-pwd}`/; export rootpre; \
srcrootpre=`cd ../../../newlib-1.14.0/newlib; ${PWDCMD-pwd}`/; export srcrootpre; \
lib=`echo ${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$,\1,'`; \
compiler="powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -i system /src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1 .14.0/newlib/libc/include"; \
for i in `${compiler} --print-multi-lib 2>/dev/null`; do \
dir=`echo $i | sed -e 's/;.*$//'`; \
if [ "${dir}" = "." ]; then \
true; \
else \
if [ -d ../${dir}/${lib} ]; then \
flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../${dir}/${lib}; make "AR_FLAGS=rc" "CC_FOR_BUILD=gc
c" "CFLAGS=-O2 -g -O2 " "CFLAGS_FOR_BUILD=-g -O2 " "CFLAGS_FOR_TARG
ET=-O2 -g -O2 " "LDFLAGS=" "LIBCFLAGS=-O2 -g -O2 " "LIBCFLA
GS_FOR_TARGET=-O2 -g -O2 " "MAKE=make" "MAKEINFO=makeinfo --split-size=
5000000 --split-size=5000000 " "PICFLAG=" "PICFLAG_FOR_TARGET=" "S
HELL=/bin/sh" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS="
"exec_prefix=/usr/local/powerpc-eabi" "infodir=/usr/local/powerpc-eabi
/info" "libdir=/usr/local/powerpc-eabi/lib" "prefix=/usr/local/powerpc-eabi"
"tooldir=/usr/local/powerpc-eabi/powerpc-eabi" "top_toollibdir=/usr/loc
al/powerpc-eabi/powerpc-eabi/lib" "AR=powerpc-eabi-ar" "AS=powerpc-eabi
-as" "CC=powerpc-eabi-gcc -B/src/build_newlib/powerpc-eabi/newlib/ -isystem /
src/build_newlib/powerpc-eabi/newlib/targ-include -isystem /src/newlib-1.14.0/ne
wlib/libc/include" "LD=powerpc-eabi-ld" "LIBCFLAGS=-O2 -g -O2 " "NM=pow
erpc-eabi-nm" "PICFLAG=" "RANLIB=powerpc-eabi-ranlib" "DESTDIR=" \
CFLAGS="-O2 -g -O2 ${flags}" \
FCFLAGS=" ${flags}" \
FFLAGS=" ${flags}" \
ADAFLAGS=" ${flags}" \
prefix="/usr/local/powerpc-eabi" \
exec_prefix="/usr/local/powerpc-eabi" \
GCJFLAGS="@GCJFLAGS@ ${flags}" \
CXXFLAGS="-g -O2 ${flags}" \
LIBCFLAGS="-O2 -g -O2 ${flags}" \
LIBCXXFLAGS="-g -O2 -fno-implicit-templates ${f lags}" \
LDFLAGS=" ${flags}" \
MULTIFLAGS="${flags}" \
DESTDIR="" \
INSTALL="/usr/bin/install -c" \
INSTALL_DATA="/usr/bin/install -c -m 644" \
INSTALL_PROGRAM="/usr/bin/install -c " \
INSTALL_SCRIPT="/usr/bin/install -c" \
all); then \
true; \
else \
exit 1; \
fi; \
else true; \
fi; \
fi; \
done; \
fi
make[5]: Entering directory `/src/build_newlib/powerpc-eabi/nof/newlib'
make[5]: *** No rule to make target `all'. Stop.
make[5]: Leaving directory `/src/build_newlib/powerpc-eabi/nof/newlib'
make[4]: *** [multi-do] Error 1
make[4]: Leaving directory `/src/build_newlib/powerpc-eabi/newlib'
make[3]: *** [all-multi] Error 2
make[3]: Leaving directory `/src/build_newlib/powerpc-eabi/newlib'
make[2]: *** [all-recursive-am] Error 2
make[2]: Leaving directory `/src/build_newlib/powerpc-eabi/newlib'
make[1]: *** [all-target-newlib] Error 2
make[1]: Leaving directory `/src/build_newlib'
make: *** [all] Error 2


b01096@B01096-11 /src/build_newlib
$


---------------------------------------------------------------------- --

b01096@B01096-11 /src/build_newlib
$ ../newlib-1.14.0/configure --target=powerpc-eabi --prefix=/usr/local/powerpc- eabi creating cache ./config.cache checking host system type... i686-pc-cygwin checking target system type... powerpc-unknown-eabi checking build system type... i686-pc-cygwin checking for a BSD compatible install... /usr/bin/install -c checking whether ln works... yes checking whether ln -s works... yes checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for gnatbind... no checking whether compiler driver understands Ada... no checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f
2
checking for correct version of gmp.h... no checking for bison... bison -y checking for bison... bison checking for gm4... no checking for gnum4... no checking for m4... m4 checking for flex... flex checking for flex... flex checking for makeinfo... makeinfo checking for expect... no checking for runtest... no checking for i686-pc-cygwin-ar... no checking for ar... ar checking for i686-pc-cygwin-as... no checking for as... as checking for i686-pc-cygwin-dlltool... no checking for dlltool... dlltool checking for i686-pc-cygwin-ld... /usr/lib/gcc/i686-pc-cygwin/3.4.4/../../../../
i686-pc-cygwin/bin/ld.exe
checking for i686-pc-cygwin-lipo... no checking for lipo... no checking for i686-pc-cygwin-nm... no checking for nm... nm checking for i686-pc-cygwin-ranlib... no checking for ranlib... ranlib checking for i686-pc-cygwin-strip... no checking for strip... strip checking for i686-pc-cygwin-windres... no checking for windres... windres checking for i686-pc-cygwin-objcopy... no checking for objcopy... objcopy checking for i686-pc-cygwin-objdump... no checking for objdump... objdump checking for powerpc-eabi-ar... powerpc-eabi-ar checking for powerpc-eabi-as... powerpc-eabi-as checking for powerpc-eabi-cc... no checking for powerpc-eabi-gcc... powerpc-eabi-gcc checking for powerpc-eabi-c++... powerpc-eabi-c++ checking for powerpc-eabi-dlltool... no checking for powerpc-eabi-gcc... powerpc-eabi-gcc checking for powerpc-eabi-gcj... powerpc-eabi-gcj checking for powerpc-eabi-gfortran... no checking for powerpc-eabi-ld... powerpc-eabi-ld checking for powerpc-eabi-lipo... no checking for powerpc-eabi-nm... powerpc-eabi-nm checking for powerpc-eabi-objdump... powerpc-eabi-objdump checking for powerpc-eabi-ranlib... powerpc-eabi-ranlib checking for powerpc-eabi-strip... powerpc-eabi-strip checking for powerpc-eabi-windres... no checking where to find the target ar... pre-installed checking where to find the target as... pre-installed checking where to find the target cc... pre-installed checking where to find the target c++... pre-installed checking where to find the target c++ for libstdc++... pre-installed checking where to find the target dlltool... pre-installed checking where to find the target gcc... pre-installed checking where to find the target gcj... pre-installed checking where to find the target gfortran... pre-installed checking where to find the target ld... pre-installed checking where to find the target lipo... pre-installed checking where to find the target nm... pre-installed checking where to find the target objdump... pre-installed checking where to find the target ranlib... pre-installed checking where to find the target strip... pre-installed checking where to find the target windres... pre-installed checking whether to enable maintainer-specific portions of Makefiles... no checking if symbolic links between directories work... yes updating cache ./config.cache creating ./config.status creating Makefile


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]