RE: intalation under winME

[Suhaib Siddiqi <ssiddiqi at inspirepharm dot com>]

Can you try one of Harold latest Test X-server, you will find his
announcements in the mailing list archive.

Suhaib

> -----Original Message-----
> From: Delmiro Fernandez-Reyes [mailto:delmiro.f@ntlworld.com] 
> Sent: Wednesday, June 20, 2001 9:10 PM
> To: cygwin-xfree@cygwin.com
> Subject: RE: intalation under winME
> 
> 
> Sorry I did forgot to sent it to the list
> I have export the display but I stil get stock in the message
> at the shell
> ....
> winCreateDefColormap () - Deferring to fbCreateDefColormap
> 
> and again I get the same window
> I have tried to compile yesterday but no suscess so far
> I am using the 4.1.0 binaries. Should I move to the 4.0.3?
> Thanks
> Delmiro
> -----Original Message-----
> From: Suhaib Siddiqi [mailto:ssiddiqi@inspirepharm.com]
> Sent: 21 June 2001 01:17
> To: 'Delmiro Fernandez-Reyes'
> Cc: 'cygwin-xfree@cygwin.com'
> Subject: RE: intalation under winME
> 
> 
> Please keep replies to the list.  Are you sure you did not 
> make a mistake?
> From your error > Xt error: Can't open display:  :0 I think you made a
> mistake in export DISPLAY=127.0.0.1:0.0  It should be exactly 
> as I wrote
> that 0.0 after :.  Also what you can do, start Cygwin bash 
> shell and try the
> following.
> 
> cd /usr/X11R6/bin
> export DISPLAY=127.0.0.1:0.0
> ./Xwin :0&
> ./xterm &
> ./twm &
> 
> Let us know if it still gives error on display
> 
> Suhaib
> 
> > -----Original Message-----
> > From: Delmiro Fernandez-Reyes [mailto:delmiro.f@ntlworld.com]
> > Sent: Wednesday, June 20, 2001 7:45 PM
> > To: Suhaib Siddiqi
> > Subject: RE: intalation under winME
> >
> > I did tryed that but stil get the same message that cannot open the
> > display
> >
> >
> > -----Original Message-----
> > From: Suhaib Siddiqi [mailto:ssiddiqi@inspirepharm.com]
> > Sent: 20 June 2001 22:43
> > To: 'Delmiro Fernandez-Reyes'
> > Cc: 'cygwin-xfree@sources.redhat.com'
> > Subject: RE: intalation under winME
> >
> >
> >
> > change it > SET DISPLAY= :0
> >
> > to
> > set DISPLAY=127.0.0.1:0.0
> >
> >
> > Suhaib
> >
> > > -----Original Message-----
> > > From: Delmiro Fernandez-Reyes [mailto:delmiro.f@ntlworld.com]
> > > Sent: Wednesday, June 20, 2001 5:38 PM
> > > To: Suhaib Siddiqi
> > > Subject: RE: intalation under winME
> > >
> > >
> > > Thanks I tried adding the REM but no improvement here the
> > > outcome of two
> > > MSDOS prompts I get when clicking on the startwin.bat
> > > File startxwin.bat
> > > @echo off
> > > SET DISPLAY= :0
> > > SET PATH=.;%PATH%;\cygwin\bin;\cygwin\usr\X11R6\bin
> > >
> > > rem cleanup after last run
> > > attrib -s \cygwin\tmp\.X11-unix\X0
> > > del \cygwin\tmp\.X11-unix\X0
> > > rmdir \cygwin\tmp\.X11-unix
> > >
> > > start XWin -screen 0 800x600x32 -engine 4
> > >
> > > REM rxvt -fn "Lucida Console-12" -e /usr/bin/bash
> > > xterm -sl 1000 -sb -rightbar -ms red -fg yellow -bg black -e
> > > /usr/bin/bash
> > > REM mxterm -sl 1000 -sb -rightbar -ms red -fg yellow -bg black -e
> > > /usr/bin/bash
> > > twm
> > >
> > > REM set stty=intr ^c susp ^z start ^q stop ^s quit ^\\ erase ^?
> > > @echo on
> > > --------
> > > I get this:
> > >
> > > Path not found - \cygwin\tmp\.X11-unix\X0
> > > Path not found
> > > Invalid path, not directory,
> > > or directory not empty
> > > _X11TransSocketINETConnect: Can't get address for
> > > /USR/X11R6/BIN/XTERM Xt error: Can't open display:  :0
> > > _X11TransSocketINETConnect: Can't get address for
> > > /USR/X11R6/BIN/TWM:  unable to open display " :0"
> > >
> > > C:\cygwin\usr\X11R6\bin>
> > >
> > > ----------
> > > And this:
> > >
> > > winDetectSupportedEngines () - Windows 95/98/Me
> > > winDetectSupportedEngines () - DirectDraw installed
> > > winDetectSupportedEngines () - DirectDraw4 installed
> > > winDetectSupportedEngines () - Returning, supported 
> engines 00000007
> > > winSetEngine () - Using user's preference: 4
> > > winCreateBoundingWindowWindowed () - WindowClient width 800 height
> > 600
> > > winInitVisualsShadowDDNL () - Masks 00ff0000 0000ff00
> > > 000000ff BPRGB 8 d 32
> > > winInitVisualsShadowDDNL () - Returning
> > > winFinishScreenInitFB () - Calling winCreateDefColormap ()
> > > winCreateDefColormap () - Deferring to fbCreateDefColormap ()
> > > ----------
> > > And a 800x600 screen that is flickering and black with lines
> > >
> > > Any ideas?
> > >
> > >
> > > -----Original Message-----
> > > From: Suhaib Siddiqi [mailto:ssiddiqi@inspirepharm.com]
> > > Sent: 20 June 2001 22:13
> > > To: 'Delmiro Fernandez-Reyes'; 'cygwin-xfree@xfree.cygwin.com'
> > > Subject: RE: intalation under winME
> > >
> > >
> > >
> > >
> > > >> Hi
> > > > I have try to get the binaries of 4.1.0 to run the xserver
> > > > under winME.
> > > > I decompress and untar everything in the rigth place. Put the
> > > > SecurytyPlociy file where should be etc. But I still get this:
> > > >
> > > > $ ./XWin -screen 0 800x600x32 -engine 4
> > > > winDetectSupportedEngines () - Windows 95/98/Me
> > > > winDetectSupportedEngines () - DirectDraw installed
> > > > winDetectSupportedEngines () - DirectDraw4 installed
> > > > winDetectSupportedEngines () - Returning, supported engines
> > 00000007
> > > > winSetEngine () - Using user's preference: 4
> > > > winCreateBoundingWindowWindowed () - WindowClient width 800
> > > height 600
> > > > winInitVisualsShadowDDNL () - Masks 00ff0000 0000ff00
> > > > 000000ff BPRGB 8 d
> > > > 32
> > > > winInitVisualsShadowDDNL () - Returning
> > > > winFinishScreenInitFB () - Calling winCreateDefColormap ()
> > > > winCreateDefColormap () - Deferring to fbCreateDefColormap ()
> > > >
> > > > with nothing else that a 800x600 screen wiht flucking black
> > > dots in it
> > > >
> > > > Any ideas or help to put this to run!
> > > >
> > > > Also when I use the .bat file startxwin I do not find rxvt
> > >
> > >
> > > You can edit and add REM before rxvt and mxterm commands in
> > > startxwin.bat
> > > file.
> > >
> > > >
> > >
>