This is the mail archive of the cygwin@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: CRLF to LF Issue


Hmm, OK. I've tried this again booting off a Knoppix Linux CD and the diff /
patch over the CRLF files on the FDD worked fine, applying the patch and
preserving the CRLF. This does seem to be something weird with the way
Cygwin is dealing with the files.

Thanks,

Rich

-----Original Message-----
From: Richard Bland [mailto:r.bland@espo.org] 
Sent: 26 June 2003 17:17
To: cygwin@cygwin.com
Subject: RE: CRLF to LF Issue


All,

Sorry, no joy - same outcome

Here's my mount :

drb398@net251 /
$ mount
C:\cygwin\usr\X11R6\lib\X11\fonts on /usr/X11R6/lib/X11/fonts type system
(binmode)
C:\cygwin\bin on /usr/bin type system (binmode)
C:\cygwin\lib on /usr/lib type system (binmode)
C:\cygwin on / type system (binmode)
a: on /mnt/foo type system (textmode)
c: on /cygdrive/c type user (binmode,noumount)

I've used the a: drive as the location for patching, just to keep it
separate from other mounts. I recreated the patch file using diff on the
textmode mount point, just to be sure. My patch file and the target source
code files were all under /mnt/foo (a:). I used 'mount -t a:/ /mnt/foo' for
the mount.

Thanks

Rich

-----Original Message-----
From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu] 
Sent: 26 June 2003 16:19
To: Richard Bland
Cc: cygwin@cygwin.com
Subject: Re: CRLF to LF Issue


On Thu, 26 Jun 2003, Richard Bland wrote:

> Hi All,
>
> I'm trying to use the 'patch' utility to modify some source code files
> created in MS-Windows Notepad. The source code is designed to ONLY be 
> used in MS-Windows, so I'm not interested in porting between 
> Unix/MS-Windows. The source code files are line terminated with a CR 
> and LF, in the normal MS-DOS fashion. If I use 'patch' to apply a 
> patch file to this source code, the CRLF pair become a single LF for 
> every line in the file. The patch file may only apply to one or two 
> lines and was generated using 'diff -Nur' on this platform. Obviously, 
> I want to retain my CRLF pair instead of it being converted to a 
> single LF.
>
> I've checked the FAQ and some of the mailing list archives, but cannot
> find anything part from references to 'Text and Binary modes' in the 
> user guide. I've tried setting the CYGWIN environment variable to 
> binmode and nobinmode and I've tried the commands within the Cygwin 
> shell as well as a regular MS-DOS prompt. The commands are being run 
> on the local NTFS partition.
>
> Version Numbers
> ---------------
> Microsoft Windows XP [Version 5.1.2600]
> uname -a : CYGWIN_NT-5.1 net251 1.3.22(0.78/3/2) 2003-03-18 09:20 i686
> unknown unknown Cygwin Patch :  2.5.8
>
> TIA
> Rich

Rich,

The "binmode" setting in the CYGWIN environment variable only affects writes
to pipes.  For disk writes, Cygwin consults the mount table. Check your
mounts (using the "mount" command), and make sure the directory that
contains the input/output file of "patch" is mounted in text mode. If it
isn't, use the "mount" command again to re-mount it.
	Igor
-- 
				http://cs.nyu.edu/~pechtcha/
      |\      _,,,---,,_		pechtcha@cs.nyu.edu
ZZZzz /,`.-'`'    -.  ;-;;,_		igor@watson.ibm.com
     |,4-  ) )-,_. ,\ (  `'-'		Igor Pechtchanski, Ph.D.
    '---''(_/--'  `-'\_) fL	a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!

"I have since come to realize that being between your mentor and his route
to the bathroom is a major career booster."  -- Patrick Naughton



Note: ESPO currently uses Microsoft Office 2000/XP.  

Please make sure that files you send can be read in this format. This
message is intended only for the named addressee(s) and may contain
confidential and/or privileged information.  If you are not the named
addressee you should not disseminate, copy, disclose, modify or distribute
this e-mail unless authorised to do so by the sender.  If you have received
this message in error then please notify m.geary@espo.org and delete the
message and any attachments accompanying it immediately.

You are also advised that the views and opinions expressed in this e-mail
message and any attachments are the author's own, and may not reflect the
views and opinions of ESPO.

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/



Note: ESPO currently uses Microsoft Office 2000/XP.  

Please make sure that files you send can be read in this format. This
message is intended only for the named addressee(s) and may contain
confidential and/or privileged information.  If you are not the named
addressee you should not disseminate, copy, disclose, modify or distribute
this e-mail unless authorised to do so by the sender.  If you have received
this message in error then please notify m.geary@espo.org and delete the
message and any attachments accompanying it immediately.

You are also advised that the views and opinions expressed in this e-mail
message and any attachments are the author's own, and may not reflect the
views and opinions of ESPO.

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]